2. Computers & electronics
  3. Cameras & camcorders
  4. Camera accessories
  5. Camera mounting accessories
  6. Kenuco
  7. DS-1273ZJ-135B

Kenuco DS-1273ZJ-135B User guide

  • Hello! I am an AI chatbot trained to assist you with the Kenuco DS-1273ZJ-135B User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DS-1273ZJ-135B
Wall Mounting Bracket for
Dome Camera (with Junction Box)
Features:
Aluminum alloy material with surface spray
treatment
Design of cable entrance hole
Better water proof design
Junction box with waterproof stopper
Dimension:
Order Model:
DS-1273ZJ-135B
Parameter:
Model
Parameters
DS-1273ZJ-135B
Wall Mounting Bracket for
Dome Camera (with Junction Box)
Appearance
Hikvision White
Range of
Application
Suitable for dome camera wall mounting
Material
Aluminum Alloy
Dimension
Φ136×243×290mm
Weight
1490g
Notice:
The bracket should be installed on flat wall
The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CD2712F-I(S),DS-2CD2732F-I(S),DS-2CC52X1P(N)-VP,
DS-2CC52X1P(N)-AVPIR2
Installation Step:
① Choose appropriate wall
to install the bracket and
thread the cable through
waterproof stopper
② Fix bracket to junction box
thread the cable and screw up
③ Fix adaptor cap to bracket
with tightening screw
④ Take off lower dome
and lining
A: Fastening screw
⑤ Install dome camera to
adaptor cap and fix with
screw
⑥ Install lining to dome camera
and adjust the angle of view
⑦ Install lower dome to
dome camera and screw
up
⑧ Installation complete
Note: The actual bracket may vary from the picture above.
/