Toro Canadian Decal Kit, 2007 and After Lawn Mower Installation guide

Type
Installation guide

Toro Canadian Decal Kit, 2007 and After Lawn Mower

The Toro Canadian Decal Kit is designed to help you easily upgrade your Toro lawn mower with the required Canadian decals. This kit includes four decals that are specifically designed to meet Canadian safety and compliance regulations.

Features and Benefits:

  • Easy to Install: The decals are self-adhesive and can be easily applied to your lawn mower.
  • Durable and Weather-Resistant: The decals are made of high-quality materials that are resistant to fading, peeling, and cracking.
  • Meets Canadian Safety and Compliance Regulations: The decals are designed to meet the specific requirements of Canadian safety and compliance regulations, ensuring that your lawn mower is compliant with local laws.

Toro Canadian Decal Kit, 2007 and After Lawn Mower

The Toro Canadian Decal Kit is designed to help you easily upgrade your Toro lawn mower with the required Canadian decals. This kit includes four decals that are specifically designed to meet Canadian safety and compliance regulations.

Features and Benefits:

  • Easy to Install: The decals are self-adhesive and can be easily applied to your lawn mower.
  • Durable and Weather-Resistant: The decals are made of high-quality materials that are resistant to fading, peeling, and cracking.
  • Meets Canadian Safety and Compliance Regulations: The decals are designed to meet the specific requirements of Canadian safety and compliance regulations, ensuring that your lawn mower is compliant with local laws.
Form No. 3357-705 Rev A
Canadian Decal Kit
For 2007 and After Toro Lawn Mower with Briggs and
Stratton Engine
Model No. 114-1584
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
Decals
4
Install the decals.
Note: Visit www .T oro .com and do wnload the F renc h Operator’ s Manual that cor responds to the model
and serial n umber of the product on whic h this kit is installed.
Step
1
Installing the Decals
Parts needed for this step:
4
Decals
Procedure
Install the decals in the positions indicated in the
table belo w . Place eac h Canadian decal directly
o v er the cor responding US English decal.
Install eac h decal as follo ws:
1. T horoughly clean the area where y ou will
install the decal.
2. Dampen the area with w ater or mildly soapy
w ater .
3. P eel the decal from the bac king and install it in
place as sho wn in Figure 1 .
Figure 1
1. Decal 104-7908 3. Decal 94-8072
2. Decal 112-8759 4. Decal 112-8867
4. Squeeg ee across the surface of the decal,
star ting at the center of the decal and w orking
to w ard the edg es , using o v erlapping strok es .
© 2007—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved
Location
US English Canadian
On the back
right-hand
corner on top
of the mower
housing
105-6838
94-8072
On the left hand
side of the rear
door
No Decal
104-7908
On the rear door
105-1295
112-8759
On the left rear
of the housing
112-8868
112-8867
2
Form No. 3357 -705 Rev A
Trousse d'autocollants pour le Canada
Pour tondeuse Toro équipée d'un moteur Briggs and
Stratton à partir de 2007
de modèle 108 -8179
Instructions d'installation
Mise en service
Pièces détachées
Reportez -vous au tableau ci -dessous pour vérier si toutes les pièces ont été expédiées.
Étape
Description
Qté
Utilisation
1
Autocollants
4
Pose des autocollants.
Remarque: R endez -v ous sur le www .T oro .com et téléc harg ez, le manuel de l’utilisateur en français
cor respondant au modèle et au n uméro de série du produit por tant ces autocollants .
1
Pose des autocollants
Pièces nécessaires pour cette
opération :
4
Autocollants
Procédure
Collez les autocollants aux emplacements indiqués
dans le tableau ci -dessous . R ecouvrez directement
les autocollants anglais a v ec les autocollants
canadiens cor respondants .
Placez c haque autocollant comme suit :
1. Netto yez soigneusement la surface a v ant
d'apposer l'autocollant.
2. Humidifiez la surface a v ec de l'eau pure ou
légèrement sa v onneuse .
3. Ôtez la pellicule de protection au dos de
l'autocollant, puis placez l'autocollant à
l'endroit prévu ( Figure 1 ).
Figure 1
1. Autocollant 104 -7908 3. Autocollant 94 -8072
2. Autocollant 112 -8759 4. Autocollant 112 -8867
4. Aplatissez la surface de l'autocollant du centre
v ers les bords pour éliminer les bulles d'air .
Empiétez légèrement à c haque passag e .
© 2007—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Enregistrez votre produit à www.Toro.com
Traduction du texte d'origine (FR)
Imprimé aux États -Unis
Tous droits réservés
Emplacement
Anglais Canadien
En haut du carter
de tondeuse,
dans le coin
arrière droit
105 -6838
94 -8072
Sur le côté
gauche du volet
arrière
Pas d'autocollant
104 -7908
Sur le volet
arrière
105 -1295
112 -8759
En haut du carter
de tondeuse,
dans le coin
arrière gauche
112 -8868
112 -8867
2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro Canadian Decal Kit, 2007 and After Lawn Mower Installation guide

Type
Installation guide

Toro Canadian Decal Kit, 2007 and After Lawn Mower

The Toro Canadian Decal Kit is designed to help you easily upgrade your Toro lawn mower with the required Canadian decals. This kit includes four decals that are specifically designed to meet Canadian safety and compliance regulations.

Features and Benefits:

  • Easy to Install: The decals are self-adhesive and can be easily applied to your lawn mower.
  • Durable and Weather-Resistant: The decals are made of high-quality materials that are resistant to fading, peeling, and cracking.
  • Meets Canadian Safety and Compliance Regulations: The decals are designed to meet the specific requirements of Canadian safety and compliance regulations, ensuring that your lawn mower is compliant with local laws.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI