ATEN OL2000LV User manual

Professional Online UPS

OL1000HV / OL1000SHV / OL1500HV / OL2000HV /

OL2000SHV / OL3000HV / OL1000LV / OL1000SLV /

OL1500LV / OL2000LV / OL2000SLV / OL3000LV

User Manual

www.aten.com

UPS User Manual

ii

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by

the party responsible for compliance could void the user's authority to

operate this equipment.

Warning: Operation of this equipment in a residential environment

could cause radio interference.

Warning: For currents lower than 16A, this is a category C2 UPS

product. In a residential environment, this product may cause radio

interference, in which case the user may be required to take additional

measures.

Warning: For currents greater than 16A, this is a product for

commercial and industrial application in the second environment

installation restrictions or additional measures may be needed to

prevent disturbances.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

UPS User Manual

iii

KCC Statement

RoHS

This product is RoHS compliant.

UPS User Manual

iv

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this

manual are subject to change without prior notification by the

manufacturer. The manufacturer makes no representations or

warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims any warranties as to merchantability or

fitness for any particular purpose. Any of the manufacturer's software

described in this manual is sold or licensed as is. Should the programs

prove defective following their purchase, the buyer (and not the

manufacturer, its distributor, or its dealer), assumes the entire cost of all

necessary servicing, repair and any incidental or consequential

damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or

TV interference caused by unauthorized modifications to this device. It

is the responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the

operation of this system if the correct operational voltage setting was

not selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE

SETTING IS CORRECT BEFORE USE.

International http://eservice.aten.com

International 886-2-8692-6959

China 86-400-810-0-810

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

1-949-428-1111

UPS User Manual

v

Package Contents

The UPS package consists of:

 1Online UPS

 1 Rack Mounting Kit

 1Rail Slide Kit

 1 RS-232 Cable

 1 USB Type A to B Cable

 4 Power Cables (HV Models only 1xIEC C13/C14+1xIEC C13/

Schuko+1xIEC C13/UK+1xIEC C13/AU(10A))

 1 Tower Stand set

 1 User Instructions*

*Features may have been added to the UPS since this manual was

printed. Please visit our website to download the most up-to-date

version of the manual.

Check to make sure that all the components are present and that

nothing got damaged in shipping. If you encounter a problem, contact

your dealer. Read this manual thoroughly and follow the installation and

operation procedures carefully to prevent any damage to the unit, and/

or any of the devices connected to it.

Manual Date: 2020-09-17

names and trademarks are the registered property of their respective owners.

UPS User Manual

vi

Contents

EMC Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv

Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv

Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv

User Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi

About this Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix

Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix

Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Internal Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

External Battery Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Chapter 1.

Introduction

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Operation Principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

UPS Front View for all series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

UPS HV Series Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

UPS LV Series Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2.

Hardware Setup

Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rack Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Vertical (Tower) Desktop Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Mounting UPS with Battery Box . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting Internal Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

External Battery Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 3.

General Operations

Turn On the UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

EPO Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Install Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Chapter 4.

LCD/Button Operations

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Button Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

UPS User Manual

vii

LCD Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Audible Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

LCD Display Wordings Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

UPS Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Suggested Battery Charger Current . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Operating Mode Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Faults Reference Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Warning Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Appendix

Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Maintenance, service and faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

HV Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

LV Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

UPS User Manual

viii

About this Manual

This user manual is provided to help you get the most from your UPS

unit. It covers all aspects of installation, configuration and operation. An

overview of the information found in the manual is provided below.

Chapter 1, Introduction, introduces you to the Professional Online

UPS. Its purpose, features and benefits are presented, and its front and

back panel components are described.

Chapter 2, Hardware Setup, provides step-by-step instructions to

setting up your unit, and explains the connections in detail.

Chapter 3, General Operations, explains the general operations of

the unit.

Chapter 4, LCD/Button Operations, describes the LCD and its button

operations in more details.

An Appendix, at the end of the manual provides technical and

troubleshooting information.

UPS User Manual

ix

Conventions

This manual uses the following conventions:

Product Information

For information about all ATEN products and how they can help you

connect without limits, visit ATEN on the Web or contact an ATEN

Authorized Reseller. Visit ATEN on the Web for a list of locations and

telephone numbers:

Monospaced Indicates text that you should key in.

[ ] Indicates keys you should press. For example, [Enter] means to

press the Enter key. If keys need to be chorded, they appear

together in the same bracket with a plus sign between them:

[Ctrl+Alt].

1. Numbered lists represent procedures with sequential steps.

 Bullet lists provide information, but do not involve sequential steps.

 Indicates selecting the option (on a menu or dialog box, for

example), that comes next. For example, Start



Run means to

open the Start menu, and then select Run.

Indicates critical information.

International http://www.aten.com

North America http://www.aten-usa.com

UPS User Manual

x

Battery Information

Please only install battery package from your dealer. Refer to the

battery package information below:

Internal Battery

External Battery Package

Rated Description Model Name

1000VA(2B) 2x9AH, 2 pcs batteries in total BC24V9AH

1000VA(3B) 3x7AH, 3 pcs batteries in total BC36V7AH

1500VA(3B) 3x9AH, 3 pcs batteries in total BC36V9AH

2000VA(4B) 4x9AH, 4 pcs batteries in total BC48V9AH

2000VA(6B) 6x7AH, 6 pcs batteries in total BC72V7AH

3000VA(6B) 6x9AH, 6 pcs batteries in total BC72V9AH

Rated Description Model Name

1000VA(2B) 2*2x9AH, 4 pcs batteries in total BP24V18AH

1000VA(3B) 2*3x9AH, 6 pcs batteries in total BP36V18AH

1500VA(3B) 2*3x9AH, 6 pcs batteries in total BP36V18AH

2000VA(4B) 2*4x9AH, 8 pcs batteries in total BP48V18AH

2000VA(6B) 2*6x9AH, 12 pcs batteries in total BP72V18AH

3000VA(6B) 2*6x9AH, 12 pcs batteries in total BP72V18AH

1

Chapter 1

Introduction

Overview

Aten Professional Online UPS is an excellent electrical apparatus that

provides emergency power to a load when the input power source or

when the mains fails. The basic technology of an online UPS is the

same as in a standby or line-interactive UPS, however, Aten

Professional Online UPS provides a much greater current AC-to-DC

battery-charger/rectifier where the rectifier and inverter are designed to

run continuously with improved cooling systems.

In all our years of working with computers, the vast majority of hardware

failures can be directly attributed to the stress hardware components

experience during the shut-down and startup process, especially if

power surges or blackouts are involved. With severe weather, the aging

electrical grid and hazards lurk inside your own walls, your equipment

is under constant attack from power problems. Even a brief loss of

power, sags or a momentary surge can ruin your equipment and destroy

irreplaceable data. Desktop computers don’t have batteries built-in like

laptops do. If you had been working on a desktop during that power

outage, the system would come to an immediate halt. Not only would

you lose your work, but the process imposes unnecessary stress on

your machine.

If UPS is present and a power loss occurs, the batteries of the UPS

keep the power steady and unchanged. Aten Professional Online UPS

adjusts incoming AC power, provides battery backup to pass through

most outages and saves open files automatically. When power is

restored, the UPS begins recharging its batteries.

The Online UPS unit continuously filters the wall power through the

battery system. Since the attached electronics run completely off the

battery (that are always topped off by the external power supply), there

is never a single millisecond of power interruption when there is power

loss or voltage regulation issues. The Online UPS unit is then effectively

an electronic firewall between your devices and the outside world by

stabilizing all the electricity your devices are ever exposed to.

The UPS has one USB port and one Serial port that allow connection

and communication between the UPS and the connected computer. A

UPS User Manual

2

power management software installed on the connected computer(s)

gives IT professionals with the tools they need to easily monitor and

manage their backup power. This advanced software allows users to

access vital UPS battery conditions, load levels, and runtime

information as well as provide graceful unattended shut down of

network computers and virtual machines connected to a battery backup

during a power event.

Aten Professional Online UPS offers you a different way to access to

detailed UPS setting and information with LCD screen. The illuminated

LCD screen displays input voltage, battery capacity, etc. and includes a

three-button configuration interface and audible alarms for different

modes of operation.

Chapter 1. Introduction

3

Features

 True double-conversion – Output power factor is 1, which means all

of the power supplied is being used for productive work and makes

work the most efficient

 Output voltage regulation < 1% – Provides higher performance and

efficiency for critical applications

 Programmable power management outlets – Users can easily and

independently control load segments. During power failure, this

feature enables users to extend battery time to mission-critical

devices by shutting down the noncritical devices

 Emergency power off function (EPO) – EPO connector at rear panel

allows emergency UPS Power Off from a remote location

 SNMP + USB + RS-232 multiple communications – Allows either

USB or RS-232 communication port to work with SNMP interface

simultaneously

 Hot swappable battery design – All potential UPS maintenance,

including complete power module exchange, can be performed

without powering down connected equipment. As long as utility

power is on, you may leave the UPS and connected equipment on

while replacing a new battery

 ECO mode for energy saving – Offers up to 97% efficiency to cut

energy usage and cost. UPS power application via static bypass,

timely returning to online double conversion when the need arises

 Provides over voltage cut-off protection and surge immunity by

MOV for full time equipment protection

 High power factor charger up to 1000W capacity with very low

ripple current when charging battery

 Multi-functional LCD interface – Displays immediate, detailed

information on input voltage, battery capacity, power status, battery

status, operating status and assessed backup runtime, etc.

 Smart battery charger design to optimize battery performance – It

will adjust charging voltage according to outside temperature and

extend the useful service life of batteries.

UPS User Manual

4

Operation Principle

The operation principle of the UPS is shown in the diagram below:

The UPS is composed of mains input, EMI/RFI filters, rectifier/PFC,

inverter, battery charger, DC-to-DC converter, battery, dynamic bypass

and UPS output.

Chapter 1. Introduction

5

Components

UPS Front View for all series

No. Component Description

1Display LCD

2 On / Mute Button Click this to turn on the LCD

3 Select Button Click this to jump to the next selection

4 Off / Enter Button Click this to turn off the LCD

5 Removable Front Panel

UPS User Manual

6

UPS HV Series Rear View

Chapter 1. Introduction

7

UPS LV Series Rear View

No. Component Description

1 Programmable Outlets For non-critical load connection. These outlets can be

programmed to provide backup power and surge

protection.

2 Backup and Surge

Protected Outlets

For critical load connection. These outlets provide

backup power and surge protection.

UPS User Manual

8

3 AC Input For HV models, connect the included Power Cable

between this port and an AC power socket.

For LV models, this serves as a power cable. Connect

the power cable to an AC power socket.

4 Network / Fax / Modem

Surge Protection

Protects standard RJ-45-based products (LAN lines)

and cabling systems from surges.

5 USB Communication

Port

For scheduled UPS shutdown / start-up and status

monitoring.

6 RS-232 Communication

Port

For scheduled UPS shutdown / start-up and status

monitoring.

7 SNMP Intelligent Slot The UPS is equipped with intelligent slot perfect for

SNMP. When installing SNMP in the UPS, it will

provide advanced communication and monitoring

options.

8 Emergency Power Off

Function Connector

(EPO)

Enables an emergency UPS Power Off from a remote

location.

9 External Battery

Connection Port

This port connects to external battery pack for backup

power. For external battery pack, please refer to

Battery Information on page x.

10 Grounding Terminal Connect to a suitable grounding object.

No. Component Description

9

Chapter 2

Hardware Setup

Mounting

The unit can be either desktop mounted (vertically or horizontally) or

rack mounted (in a 19” rack chassis).

Rack Mount

A rail slide kit and rack mounting kit is provided in the package for rack

mounting. The rail slide kit is installed on the rack and the rack mounting

kit installs the UPS to the rack. To mount the UPS, do the following:

1. Make sure the rail slide kit includes all the components. The

components include 2 slide rails (1 for each side, indicated by L and

R in the diagram below), 6 M6 nuts, 4 fixing studs and 8 M6 screws,

as shown in the diagram below:

1. Important safety information regarding the placement of

this device is provided on Safety Instructions on page 49.

Please review it before proceeding.

2. Make sure that power to all the devices you will be

installing has been turned off. You must unplug the power

cords of any computers that have the Keyboard Power On

fi

UPS User Manual

10

2. Insert the 4 fixing studs: Two screw holes are available on both

ends of a slide rail. Screw a fixing stud into the top screw hole as

shown:

3. Have the rail near the supporting columns, pull the two ends of the

rail slider apart. While at it, fit the fixing studs into the columns’

holes on the same level. This step serves to hold the slider rail in

place for the latter steps.

4. Screw a M6 screw into each of the bottom holes to fix the rail slider

in place for both ends of the rail, and for both rail sliders (a total of 4

M6 screws are used here).

Page is loading ...

ATEN OL2000LV User manual

This manual is also suitable for

ATEN OL2000LV User manual

Related papers

Other documents