The Home Depot MVSR33 User manual

Type
User manual

The Home Depot MVSR33 is a versatile tool that can be used for a variety of tasks around the home, including drilling, driving screws, and mixing paint or mortar. It features a powerful motor that delivers up to 350 in-lbs of torque, and a variable speed trigger that allows you to control the speed of the drill from 0 to 2,500 RPM. The MVSR33 also has a keyless chuck that makes it easy to change bits quickly and easily, and a built-in LED light that illuminates the work area.

The Home Depot MVSR33 is a versatile tool that can be used for a variety of tasks around the home, including drilling, driving screws, and mixing paint or mortar. It features a powerful motor that delivers up to 350 in-lbs of torque, and a variable speed trigger that allows you to control the speed of the drill from 0 to 2,500 RPM. The MVSR33 also has a keyless chuck that makes it easy to change bits quickly and easily, and a built-in LED light that illuminates the work area.

CARE INTRUCTIONS
Care should be given to the cleaning of this product. Although
its finish is extremely durable, it can be damaged by harsh
abrasives or polish. To clean, simply wipe gently with a damp
cloth and blot dry with a soft towel.
TEMPLATE
Towel Ring/Paper Holder/Robe Hook 18" Towel Bar
18" / 457.2 mm
11/10"
28.8 mm
24" / 609.6 mm
24" Towel Bar
STEP 4:
Use hex wrench(e) to loosen set screw(d)
in both posts.
4
1
STEP 3:
(1) Place the mounting bracket(c) (facing
outward) on the wall.
(2) Insert screws into bracket slots andan-
chors.
(3) Turn and rotate screws(b) through
bracket into anchors clockwise. Repeat for
remaining bracket and screws.
NOTE: Slots in bracket allow for adjust-
ment.
1
2
2
3
3
b
a
STEP 5:
(1) Place one post over the mounting bracket
with the set screw facing downward. The
post must hook over the mounting bracket.
(2) Use hex wrench to hand tighten set
screw.
STEP 2:
2
1
1
2
c
2
(1) Use Phillips head screw driver to fasten
anchor(a) into drywall.
NOTE: Some force may be needed to push
anchor tip into drywall.
(2) Turn/rotate anchor clockwise into wall
until the top of the anchor is flat against
wall.
NOTE:
Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact HomLux Customer Service.
For ease of installation, read through all instructions before you begin.
HARDWARE INCLUDED
INSTALLATION GUIDE
TOOL REQUIRED (NOT INCLUDED)
Lever Drill Masking Tape
Phillips ScrewdriverMarking PencilSafety Goggles
a: Fasten Anchor e: Hex Wrench
c: Mounting Bracket d: Set Screw
b: Mounting Screw
5
1
2
1
STEP 6:
(1) Assemble product(as shown).The post
must hook over the mounting bracket.
NOTE: It is not necessary to assemble a
spring loaded toilet paper holder before
mounting posts on wall. Place remaining
post over the mounting bracket with the
set screw facing downward.
(2) Use Allen wrench to hand tighten set
screw.
6
2
1
1
Bath Hardware Installation Manual
(1) Identify the four hole locations on
template for your item.
(2) Place tape on all four corners of the
template.
(3) Position template on wall in desired
location making sure that it is level, then
tape to the wall.
(4) Mark hole locations and check to
make sure marks are on wall. Remove
template from wall.
STEP 1:
3
4
1
PORTE-SE RVIETTE DE 68 CM (24 PO)
TOALLERO DE 24" (68 CM)
TEMPLATE
Towel Ring/Paper Holder/Robe Hook
3/4"
18.8mm
2
1
SPECIFICATIONS
A: 24" Towel Bar A: 24" Towel Bar A: 24" Towel Bar
B: 18" Towel Bar C: Paper Holder
D: Towel Ring
B: 18" Towel Bar
3.2"
80mm
70mm
2.8"
2.2"
609.6mm
24"
2.2"
55mm
55mm
16mm
0.6"
3.2"
80mm
70mm
2.8"
55mm
2.2"
55mm
2.2"
457.2mm
18"
D: Towel RingE: Robe Hook
C: Paper Holder
80mm
3.2"
55mm
2.2"
55mm
2.2"
E: Robe Hook
C: Paper Holder
E: Robe HookD: Towel Ring
B: 18" Towel Bar
975D004935
Item: 0764004646
63B7004936
EB18004938
Item: 0657004937
AD5A00464A
A1AE00493A
Item: 005C004939
521800493B
16mm
0.6"
55mm
2.2"
3.2"
80mm
70mm
2.8"
6.9"
0.4"
175mm
9.5mm
88mm 68mm
3.5" 2.7"
65mm
2.6"
2.7"
68.3mm
56.5mm
2.2"
65mm
2.6"
0.4"
9.5mm
6.9"
175mm
E: Robe Hook
5.2"
3.2"
80mm
70mm
133mm
2.8"
E: Robe Hook
2.2"
55mm
2.2"
55mm
70mm
2.8"
16mm
0.63"
56.5mm
68.3mm
2.2"
2.7"
609.6mm
24"
12mm
0.5"
65mm
2.6"
2.7"
2.2"
68.3mm
112.4mm
84.7mm 56.5mm
4.4"
151.4mm
3.3"
6"
65mm
2.6"
62.5mm
31mm
2.5"
1.2"
55mm
2.2"
68.3mm
130mm
175mm
2.9"
6.9"
5.1"
55mm
2.2"
16mm
0.6"
28mm
1.1"
74.5mm
65mm
2.6"
2.9"
609.6mm
24"
55mm
2.2"
74.5mm
65mm
2.6"
2.9"
609.6mm
24"
16mm
0.6"
74.5mm
65mm
2.6"
2.9"
457.2mm
18"
74.5mm
65mm
2.6"
2.9"
457.2mm
18"
12mm
0.5"
55mm
2.2"
27.5mm
1.1"
457.2mm
18"
56.5mm
68.3mm
2.2"
27"
457.2mm
18"
70mm
80mm
2.8"
3.2"
12mm
65mm
2.6"
0.5"
9.5mm
55mm
2.9"
74.5mm
65mm
2.6"
6.9"
175mm
2.2"
0.4"
  • Page 1 1
  • Page 2 2

The Home Depot MVSR33 User manual

Type
User manual

The Home Depot MVSR33 is a versatile tool that can be used for a variety of tasks around the home, including drilling, driving screws, and mixing paint or mortar. It features a powerful motor that delivers up to 350 in-lbs of torque, and a variable speed trigger that allows you to control the speed of the drill from 0 to 2,500 RPM. The MVSR33 also has a keyless chuck that makes it easy to change bits quickly and easily, and a built-in LED light that illuminates the work area.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI