Bertazzoni KIN30XT Operating instructions
- Type
- Operating instructions
KIN30XT
30 INSERT HOOD, 1 MOTOR 600 CFM
KIN30XT
26''
/
3 8
28''
/
3 8
1''
/
5 8
12''
/
9 16
12''
/
1 8
24''
12''
/
15 16
27''
/
9 16
5''
/
1 8
3''
13''
/
1 813''
/
3 4
5''
/
15 16
DIMENSIONS
Min
/
3 4''
Min
/
13 16''
13''
/
9 16
KIN30XT - Cabinet
27''
/
5 8
CABINET CUT-OUT
24'' min
30'' min
Recommended height above cooking surface
Min 24” for induction/electric worktop
Min 30” for gas worktop
HOOD CLEARANCE
Recommended height above cooking surface
Min 24” for induction/electric worktop
Min 30” for gas worktop
ELECTRICAL CONNECTION
The Power Supply Cord and plug must be connected
to a separate 120 Volt AC 60 Hz,15 Amp or more
branch circuit, single grounded receptacle.
The cord has a 3-pronged plug and must be installed
into an outlet that is properly grounded.
The electrical receptacle must be
within the minimum cord length of 59”.
KIN30XT + cavo elettrico
Disclaimer: while every effort has been made to ensure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change it at any time without notice.
For detailed installation instructions, consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa. bertazzoni.comversion: 3
-
1
Bertazzoni KIN30XT Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI