In the box
1
Stacking kit,
2
strap,
3
strap tensioner,
4
anti-slip components (8x),
5
plastic protective cover.
Your own tools
Spirit level.
15 minutes 2 people 2 cups
of coffee
1
2
3
5
4
AT TACHMENT.
No issues.
1. PLACING THE STACKING KIT 2. ATTACHING THE STRAP (1) 3. ATTACHING THE STRAP (2)
Apply 4 of the anti-slip components
4
onto the corners of the stacking kit. Next,
place your dryer in the middle of the
stacking kit.
Roll out the strap
2
and make sure the
lever of the strap tensioner
3
is pointing
outwards.
Pull the strap down through the slot on the
right side of the stacking kit
1
.
Tighten the strap
2
around the top or side
of your dryer as follows:
Open the strap tensioner
3
and pull the
strap through the middle slot. Next, pull
the strap all the way through the strap
tensioner.
Pull the strap
2
and tighten it around your
washing machine and dryer until it’s fixed
in place. Do this by pulling the lever of the
strap tensioner
3
up and down.
Finally, place the plastic protective
cover
5
on top of the strap tensioner.
Pull the strap
2
underneath the washing
machine, keeping it straight in the middle.
Next, pull the strap up through the slot on
the left side of the stacking kit
1
.
Leave the strap hanging for now.
Worktop load capacity.
e worktop is only suitable
for a maximum weight of 10
kilograms.
Placing it level.
Make sure the washing
machine is level before
placing the stacking kit.
BBTS20
4. PLACING THE DRYER 5. TENSIONING THE STRAP (1) 6. TENSIONING THE STRAP (2)
Follow all instructions as described here
and only use the included tools. Only use the
worktop for your laundry basket or to fold your
laundry. If you fail to do so, the warranty will be
voided and Coolblue won’t be liable. at would
be a waste of your purchase.
Stick four of the the anti-slip components
4
on the bottom of the stacking kit.
Samsung washing machine? Push them
against the outer edge. Turn the stacking
kit over and place it on the middle of the
washing machine.
CHECKLIST.
You’re 50% there.
/