2. Ecler
  3. Wi Speak
Wi Speak

Ecler Wi Speak User guide

  • Hello! I have reviewed the provided Quick Guide for the Ecler GLOBE(PD) audio system and CORE transmitter. The document outlines the steps for setting up the wireless audio system, including plugging in the transmitter, hanging the speaker, powering on, and pairing using LED indicators and provides a brief guide to start playing music. I'm ready to answer any questions you have about this guide or the device.
  • How do I connect the audio source?
    How do I pair the devices?
    What app can be used to control the device?
GLOBE(PD) Quick Guide
WIRELESS PRO AUDIO
1. Plug in CORE transmitter
24V
DC IN
AUX
CTRL INPUT 1INPUT 2
RIGHT LEFT
OUT
REMOTE
VOLUME
MUTE
CTRL
VOL
REMOTE
LOCKED
LOCAL & APP
Connect the transmitter DC adapter to the
electrical outlet and use one of the 3 available
audio inputs to connect the music source
Input 3Input 2
2. Hangs GLOBE from the ceiling 3. Power ON GLOBE
Check whether the unit is
really powered or not by
watching the LED
indicators.
If blue and green LEDs
start blinking the unit is
ready to pair
AC CABLE
SUSPENSION HOLES
FOR SECURITY CABLE
N
L
1
2
3
4. Pair the devices
When the CORE and
GLOBE lights stop
blinking, the devices
are paired
Make a short press on the WiS PAIR key
(using a clip e.g.), the WiS and RX LEDs will
start to blink
5. Select the input and play the music!
Use WiSpeak grip
app for set up and
control functions
WiSpeak grip
/