Maxax MX19040-10-P User manual

MX19040-10-P
Maxax
Brand
Maxax
Model
MX19040-10-P
Type
User manual

Maxax MX19040-10-P is a stunning chandelier-style light fixture designed to elevate the ambiance of any room. With its intricate crystal design and adjustable height, it offers a versatile lighting solution for various ceiling heights. The fixture requires ten E12 bulbs (not included), allowing you to customize the brightness and warmth of the light to your preference. Installation involves connecting wires and assembling the fixture's components, but it's recommended to seek professional assistance for electrical work.

Maxax MX19040-10-P is a stunning chandelier-style light fixture designed to elevate the ambiance of any room. With its intricate crystal design and adjustable height, it offers a versatile lighting solution for various ceiling heights. The fixture requires ten E12 bulbs (not included), allowing you to customize the brightness and warmth of the light to your preference. Installation involves connecting wires and assembling the fixture's components, but it's recommended to seek professional assistance for electrical work.

MX19040-10-P
Light Bulb
(Not included)
E12
( Rated 110-130V/60Hz, bulb 60W maximum.)
N
L
PARTS INCLUDED
Part Description QTY
Code
Please read all instructions carefully. Before you
proceed to install, make sure that the power supply
is turned off and remains off until installation is
completed.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to
connect the electrical circuit.
CAUTION: Risk of fire
A
B
C
D
E
F
Canopy
Lamp Plate 1
1 PCS
1 PCS
1 PCS
1 PCS
G2 PCS
Round Ball
Lifting Ring
Sling Chain
Decorative Cover
Mounting Bracket
Warning: If any special control devices are used
with this fixture, follow the instructions carefully
to assure full compliance with N.E.C.requirements.
If there are any questions, contact a qualified
electric contractor.
Warning: California Residents Proposition 65
This product contains lead, a chemical known to
the state of California to cause cancer and birth
defects or other reproductive harm. Do not place
the product in your mouth. Wash your hands after
handling this product.
Caution: It is highly recommended to get an
electrician to install this light. Please make sure
to turn the electricity off at the main circuit
breaker before beginning installation. All glass
is fragile.Use care when handling glass
component(s)and/or lamp(s).
Assembly & Installation Instructions
Dear Customer:
Thank you for your business!
If you have any questions or problems, please send us
an email to [email protected] or call us at
469-312-6428. We will do everything possible to make
you completely satisfied with your purchase.
For video instruction, please search" MX19040-10-P" on
Youtube
Product reviews help future customers to make their
purchase decision. You are encouraged to share your
experience by leaving a short product review on the
platform where you bought this product.
Thank you!
Zgear Team
1 PCS
H10 PCS
Lamp Holder
I10 PCS
J10 PCS
Lamp Arm
1 PCS
Please read all instructions carefully. Before you
proceed to install, make sure that the power supply
is turned off and remains off until installation is
completed.
K2 PCS
L1 PCS
Lamp Plate 2
N1 PCS
Decorative Nuts
6,39
A
B
C
D
E
F
G
H
I
JK
L
N
Crystal Dish
Crystal Cover
1/3
Assembly and Installation Steps
Open the it.
Step 1
Open the it.
Step 2
Lock together
Step 4
Lock together
Step 3
Lock together
Step 5
Connect all white wires (-) from the arm together, and connect
all black wires (+) from the arm together. Do not mix the black
and white wires. There are two same main wires, they are
thicker than the black and white wires. Connect black wires of
the arms together with one of the main wire. Connect white
wires of the arms together with the other main wire. The wires
connection is finished.
Step 5
Lock together
Step 6
1. Lock the crossbar to the junction box of the ceiling by using 2 pcs
of 5/32 screws in the accessories bag.
2. Connect the wires. The hot/positive (+) wire is the one which has writing
on it. The negative (-) wire is the one which has no writing.
3. Cover the celing canopy and attach the screws to the canopy.
Step 8
Lock together
Step 7
Put it down
Step 9
Install 10 E12 bulbs
(Not included).
Step 10
Installation
of crystal
strings
Step 11
6#
5#
1#
2#
4#
3#
7#
8#
9#
10#
2/3
Please note: The parts in this table are completely unassembled,for
illustrative purpose. In the actual product that you receive, some parts
are assembled and attached together.
1211+11
3+3
10 PCS
1 PCS
10 PCS
20 PCS
40 PCS
10 PCS
10 PCS
10 PCS
10 PCS
6 PCS
7
5
123456 7 8910
3# =3+3 10 PCS 4# =4 40 PCS
5# =7+2
7# =5+2
10 PCS 6# =6 10 PCS
10 PCS 8# =8 10 PCS
1# =1+2 10 PCS 2# =(11+11)+2 10 PCS
9# =9 6 PCS 10# =10 1 PCS
1#
2#
3#
4#
5#
6#
7#
8#
9#
10#
1# 2#
3#
4#
5# 6#
7# 8#
9# 10#
11
2
4
26
8
910
2
3/3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Maxax MX19040-10-P User manual

MX19040-10-P
Maxax
Brand
Maxax
Model
MX19040-10-P
Type
User manual

Maxax MX19040-10-P is a stunning chandelier-style light fixture designed to elevate the ambiance of any room. With its intricate crystal design and adjustable height, it offers a versatile lighting solution for various ceiling heights. The fixture requires ten E12 bulbs (not included), allowing you to customize the brightness and warmth of the light to your preference. Installation involves connecting wires and assembling the fixture's components, but it's recommended to seek professional assistance for electrical work.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents