ZLINE RFM Operating instructions

Brand: ZLINE

Model: RFM

Type: Operating instructions

Product Dimensions

BEFORE INSTALLATION

STARTING UP THE APPLIANCE

• Before powering on initially, keep the refrigerator still for two hours before

connecting it to power supply.

• Before putting in any fresh or frozen food, the refrigerator should be run for 2-3

hours or for over 4 hours in summer when the ambient temperature is high.

• Leave enough space to open the doors.

PLACEMENT

• Before use, remove all packing materials, including bottom cushions, foam pads,

and tape inside of the refrigerator. Tear off the protective ﬁlm on the doors and

the refrigerator body.

• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist

or watery places to prevent rust or reduction of insulating effect.

• Do not spray or wash the refrigerator. Do not put the refrigerator in moist places

where it can be easily splashed with water, so as not to affect the electrical

insulation properties of the refrigerator.

• The refrigerator should be placed in a well-ventilated indoor place and the

ground shall be ﬂat and sturdy (rotate left or right to adjust the adjustable leg for

leveling, if unstable).

• The top space of the refrigerator shall be greater than 1 1/2" - 2" and the

refrigerator should be placed against a wall with a free distance of more than

2" on the back and 1/2" - 1" on the sides. This facilitates heat dissipation.

62 11/16”*

(1593 mm)

*Working space before sliding into cabinet cut out

35 5/8”

(905 mm)

13 9/16”

(344 mm)

13 9/16”

(344 mm)

43 3/16”

(1098 mm)

135

1776 mm

1067 mm

(42”)

(24.3/8”)

620 mm

1743 mm

(29”)

737 mm

(68 5/8”)

1776 mm

(69 7/8”)

1067 mm

(42”)

24 7/16”

(620 mm)

29”

(737 mm)

(3.2 mm)

8“

(3.2 mm)

8“

2”

(51 mm)

RFM - Series

RFM-W- Series

ZLINE RFM Operating instructions

ZLINE RFM Operating instructions

ZLINE RFM Operating instructions

Related papers

Other documents