2. AFX MOTORSPORTS
  3. CAN022
CAN022

AFX MOTORSPORTS CAN022 User manual

  • I have reviewed the Roof Rack Installation Manual for the CAN022 model. This manual provides instructions for installing a sport roof rack for RZR XP PRO which includes detailed guidance on assembling the components. I am ready to assist you with any questions you might have about the installation process or specifications outlined in the manual.
  • What screws are used to install the rear roof rack?
    What screws are used to install the frontal roof rack?
    How many screws and nuts are needed for the central bars?
THIS PRODUCT IS FOR OFF ROAD USE ONLY
Drilling suggestion
and restraint with tube
clamps
Settle the complete rack over the roof aligning the perforations.
clamps (as it shown in the image).
* For safety tighten all the screws.
Now you have completed the installation.
Central Bar
3/16 x 1/2” Screw
Front Roof Rack
Align 3 central bars with the perforations (as it is shown in the
image). Use twelve 3/16 x 1/2” screws with nut, inserting them
bottom-up and tighten all screws.
Central Bar Rear Roof Rack
Front Roof Rack
1/4 1/2” Screw
For the installation of this sport roof rack it is necessary to
perform additional perforations to your RZR XP PRO roof.
Place the rear roof rack with the laterals, the lips goes inside of the
laterals. (as it is shown in the image). Use four 1/4x 1/2” screws with
nut. (Do not tighten yet).
Nuts
Laterals
Rear Roof Rack
Nuts
Frontal Roof Rack
1/4 1/2” Screw
Place the frontal roof rack with the laterals (as it is shown in
the image). Use four 1/4 x 1/2” screws with nut (Do not
tighten yet).
(8X) 1/4” x 1/2” Bolts
(4x) 1/4” washers
(12x) 1/4” Nuts
(12X) 3/16” x 1/2“ Bolts
(12x) 3/16” Security Nuts
(4x) 1/4” x 1” Bolts
Hardware:
(8X) 1/4” x 1/2” Bolts
(4x) 1/4” washers
(12x) 1/4” Nuts
(12X) 3/16” x 1/2“ Bolts
(12x) 3/16” Security Nuts
(4x) 1/4” x 1” Bolts
Hardware:
/