Havit Lighting Bata Recessed Brick Light Installation guide

Type
Installation guide

Havit Lighting Bata Recessed Brick Light is a versatile and durable lighting solution for both indoor and outdoor applications. Crafted from high-quality stainless steel and aluminum, it boasts an IP54 rating, making it resistant to dust and water splashes. With a built-in 10W LED, this light emits a bright and energy-efficient illumination, offering three color temperature options: 3000K, 4000K, and 5500K. Installation is a breeze, thanks to the parallel wiring system and detailed instructions provided.

Havit Lighting Bata Recessed Brick Light is a versatile and durable lighting solution for both indoor and outdoor applications. Crafted from high-quality stainless steel and aluminum, it boasts an IP54 rating, making it resistant to dust and water splashes. With a built-in 10W LED, this light emits a bright and energy-efficient illumination, offering three color temperature options: 3000K, 4000K, and 5500K. Installation is a breeze, thanks to the parallel wiring system and detailed instructions provided.

Product Specications
Model No. HV3003T-BLK-12V HV3004T-BLK-12V HV3003T-SS316-12V HV3004T-SS316-12V
Name Bata
Material 316 Stainless Steel + Aluminium
Colour Black Stainless Steel
IP Rating IP54
Input Voltage 12v DC
Lamp Base Built in LED
Lamp Wattage 1x 10w
Colour Temp TRI Colour - 3000k, 4000k, 5500k
Lumens 800lm, 850lm, 900lm
CRI > 80
Wiring Parallel
Dimmable No
Warranty 2 Years Replacement*
Dimensions
Contact Details: Warranty Terms & Conditions*
Bata Recessed Brick Light Installation Instructions
143 Beauchamp Road
Matraville NSW 2036
Australia
Tel: 02 9381 8300
Fax: 02 9666 8881
Web: www.havit.com.au
Important Safety Issues:
This product must be installed by a qualied electrician accord-
ing to AS/NZS 3000.
Ensure all electrical mains are disconnected before any installa-
tion.
Do not exceed maximum wattage restrictions for globes: 240V
GU10 = 35w / 12V MR16 = 20w
Modication of this product will void any warranty.
Havit Lighting does not take responsibility for wrong installation,
incorrect use, or use of installation material that does not belong
to the system.
When installing low voltage ttings, Voltage to tting must be
within +or- 5% of voltage required and cannot be installed more
than 25m from LED Driver, if not within this allowance warranty
will be voided.
Aluminium and 304SS ttings must not be installed within 2km
of any salt water environments.
When installing copper ttings, gloves must be worn to avoid
any oils transferring to tting.
All 316 stainless steel ttings must have regular cleaning
maintenance to avoid any tea staining from forming on tting.
(Warranty does not cover Tea Staining)
All o-rings and seals must be in place correctly to maintain
warranty.
These instructions may be updated at any time due to product
improvements, Please visit website for most current installation
instructions.
Steps for Installation:
1. Make sure that the electrical circuit is free of voltage (master switch o)
2. Make a hole where tting is to be placed using dimensions provided on line drawings
3. Insert canister, and ensure that the top is level with wall. Failure to do so will void warranty.
4. Using an appropriate 12v DC LED Driver - DO NOT CONNECT LIGHT FITTING DIRECTLY TO 240V
5. Connect the cable - If more than one tting installed, wiring must be done in parallel.
6. Strip back the cable on both tting and cable run and twist the positive cables together. Then connect neutral cables together
7. Solder all joins using solder and either a heat gun or butane gas torch.
8. Cover connections using an adhesive lined heat shrink or gel cap to make connection watertight. Failure to do this will void warranty.
9. Heat the heat shrink or crimp the gel cap making sure all connections are covered.
10. Remove screws from face, remove face and glass and set aside.
11. Remove PCB from tting
12. Attach body of tting to canister making sure body sits just behind canister edge.
13. Reattach PCB to tting.
14. Colour temperature is preset to 3000k, to change slide switch located on front of PCB to desired colour temperature.
15. Reinsert glass and then reattached face making sure screws are tight to avoid any water penetration.
16. Apply silicon around edge of tting to prevent any water from getting inside to electrical connections.
17. All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Must be installed by a licensed electrician
Additional Information
HV3004T-BLK-12VHV3003T-SS316-12VHV3003T-BLK-12V HV3004T-SS316-12V
HV3004T
HV3003T
Product Specications
Model No. HV3003T-BLK-240V HV3004T-BLK-240V HV3003T-SS316-240V HV3004T-SS316-240V
Name Bata
Material 316 Stainless Steel + Aluminium
Colour Black Stainless Steel
IP Rating IP54
Input Voltage 240v AC
Lamp Base Built in LED
Lamp Wattage 1x 10w
Colour Temp TRI Colour - 3000k, 4000k, 5500k
Lumens 800lm, 850lm, 900lm
CRI > 80
Wiring Parallel
Dimmable No
Warranty 2 Years Replacement*
Dimensions
Contact Details: Warranty Terms & Conditions*
Bata Recessed Brick Light Installation Instructions
143 Beauchamp Road
Matraville NSW 2036
Australia
Tel: 02 9381 8300
Fax: 02 9666 8881
Web: www.havit.com.au
Important Safety Issues:
This product must be installed by a qualied electrician according to AS/
NZS 3000.
Ensure all electrical mains are disconnected before any installation.
Modication of this product will void any warranty.
Havit Lighting does not take responsibility for wrong installation, incorrect
use, or use of installation material that does not belong to the system.
When installing low voltage ttings, Voltage to tting must be within
+or- 5% of voltage required, if not within this allowance warranty will be
voided.
Aluminium and 304SS ttings must not be installed within 2km of any salt
water environments.
When installing copper ttings, gloves must be worn to avoid any oils
transferring to tting.
All 316 & 304 stainless steel ttings must have regular cleaning mainte-
nance to avoid any tea staining from forming on tting.
(Warranty does not cover Tea Staining)
All o-rings and seals must be in place correctly to maintain warranty
When installing surface mounted bollards, base plate must be installed
on concrete or concrete pad, Fitting should not be installed under ground
level, all holes including cable entry must be silliconed to prevent any
water pentration into tting, silicon must also be appiled around tting at
ground level. Failure to do this will void warranty
This form may be updated at any time due to product improvements,
please check online installation form for most current version.
Steps for Installation:
1. Make sure that the electrical circuit is free of voltage (master switch o)
2. Make a hole where tting is to be placed using dimensions provided on line drawings
3. Insert canister, and ensure that the top is level with wall. Failure to do so will void warranty.
4. Connect the cable - If more than one tting installed, wiring must be done in parallel.
5. Strip back the cable on both tting and cable run and twist together Earth cables rst, then positive cables together. Then connect neutral cables together.
6. Solder all joins using solder and either a heat gun or butane gas torch.
7. Cover connections using an adhesive lined heat shrink or gel cap to make connection watertight. Failure to do this will void warranty.
8. Heat the heat shrink or crimp the gel cap making sure all connections are covered.
9. Remove screws from face, remove face and glass and set aside.
10. Remove PCB from tting
11. Attach body of tting to canister making sure body sits just behind canister edge.
12. Reattach PCB to tting.
13. Colour temperature is preset to 3000k, to change slide switch located on front of PCB to desired colour temperature.
14. Reinsert glass and then reattached face making sure screws are tight to avoid any water penetration.
15. Apply silicon around edge of tting to prevent any water from getting inside to electrical connections.
16. All connections must be carried out carefully, inspect all contacts before switching back on the electric circuit.
Must be installed by a licensed electrician
Additional Information
HV3004T-BLK-240VHV3003T-SS316-240VHV3003T-BLK-240V HV3004T-SS316-240V
HV3004T
HV3003T
  • Page 1 1
  • Page 2 2

Havit Lighting Bata Recessed Brick Light Installation guide

Type
Installation guide

Havit Lighting Bata Recessed Brick Light is a versatile and durable lighting solution for both indoor and outdoor applications. Crafted from high-quality stainless steel and aluminum, it boasts an IP54 rating, making it resistant to dust and water splashes. With a built-in 10W LED, this light emits a bright and energy-efficient illumination, offering three color temperature options: 3000K, 4000K, and 5500K. Installation is a breeze, thanks to the parallel wiring system and detailed instructions provided.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI