2. ITC
  3. 84600
84600

ITC 84600 User manual

  • Hello! I've reviewed the installation instructions for the ITC Ski Tow model 84600 and understand the steps required for mounting. The document outlines the bracket mounting procedure, safety instructions, and lists the tools needed. I'm ready to answer your questions about this product.
  • What tools are needed for installation?
    What is the first step for bracket mounting?
    What should be noted when installing the posts?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
Bracket Mount:
1. Drill two 3/8” holes 2.12” on center
2. Remove hex nuts and mounting plate from posts
3. Insert posts into holes drilled in step 1 making sure ski tow tongue is facing up
4. Install back plate over posts
5. Attach and tighten hex nuts back on posts
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL IN-
STRUCTIONS.
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• It is recommended that fuse protection be added to the positive(+) input.
INSTALLATION INSTRUCTIONS
Transom Mount Ski
Tow
Part#: 84600
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev A • 07/20/16
Page 1 of 1
PARTS/TOOLS NEEDED:
Ski Tow Power Drill
/