AEG X79283MG0 User manual

Category
Cooker hoods
Type
User manual
X79283MG0
EN COOKER HOOD
DE DUNSTABZUGSHAUBE
FR HOTTE DE CUISINE
NL AFZUIGKAP
ES CAMPANA
PT EXAUSTOR
IT CAPPA
SV SPISFLÄKT
NO KJØKKENVIFTE
FI LIESITUULETIN
DA EMHÆTTE
3
ENGLISH
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not nd on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll nd everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect,
from specialist cookware to cutlery baskets, from bottle holders to delicate laundry
bags…
Visit the webshop at:
www.aeg.com/shop
ENVIRONMENT CONCERNS
Recycle the materials with the symbol Put the packaging in applicable
containersto recycle it.
Help protect the environment and human health and to recycle waste of
electricaland electronic appliances. Do not dispose appliances marked with the
symbol with the household waste. Return the product to your local recycling
facility orcontact your municipal ofce.
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available
The information can be found on the rating plate.
Model ___________________________
PNC ____________________________
Serial Number ____________________
4
RECOMMENDATIONS AND
SUGGESTIONS
The Instructions for Use apply to several
versions of this appliance. Accordingly,
you may nd descriptions of individual
features that do not apply to your specic
appliance.
The manufacturer will not be held liable
for any damages resulting from incorrect
or improper installation.
The minimum safety distance between
the cooker top and the extractor hood is
650 mm (some models can be installed
at a lower height, please refer to the
paragraphs on working dimensions and
installation).
Check that the mains voltage corresponds
to that indicated on the rating plate xed to
the inside of the hood.
For Class I appliances, check that the
domestic power supply guarantees
adequate earthing.
Connect the extractor to the exhaust ue
through a pipe of minimum diameter 120
mm. The route of the ue must be as
short as possible.
Do not connect the extractor hood to
exhaust ducts carrying combustion fumes
(boilers, replaces, etc.).
If the extractor is used in conjunction
with non-electrical appliances (e.g. gas
burning appliances), a sufcient degree
of aeration must be guaranteed in the
room in order to prevent the backow of
exhaust gas. The kitchen must have an
opening communicating directly with the
open air in order to guarantee the entry of
clean air. When the cooker hood is used in
conjunction with appliances supplied with
energy other than electric, the negative
pressure in the room must not exceed
0,04 mbar to prevent fumes being drawn
back into the room by the cooker hood.
If the supply cord is damaged, it must
be replaced from the manufacturer or its
service agent.
USE
The extractor hood has been designed
exclusively for domestic use to eliminate
kitchen smells.
Never use the hood for purposes other
than for which it has been designed.
Never leave high naked ames under the
hood when it is in operation.
Adjust the ame intensity to direct it onto
the bottom of the pan only, making sure
that it does not engulf the sides.
Deep fat fryers must be continuously
monitored during use: overheated oil can
burst into ames.
Do not ambè under the range hood; risk
of re.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
CAUTION: Accessible parts may become
hot when used with cooking appliances”.
MAINTENANCE
1. Switch off or unplug the appliance from
the mains supply before carrying out any
maintenance work.
Clean and/or replace the Filters after the
specied time period (Fire hazard).
4 months: for the Activated Charcoal -
Filters.
2 months: for the Metal Grease Filters. -
Control lights, if present. -
Clean the hood using a damp cloth and a
neutral liquid detergent.
5
ENGLISH
CONTROLS
Button Function Led
L Turns the lights on/off at maximum strength. -
T1 Turns the motor on/off at speed one. Fixed.
T2 Turns the Motor on at speed two.
Press and hold the button for approximately 3 seconds, with all the
loads turned off (Motor and Lights), to turn the Activated Charcoal
Filter alarm on. The relevant LED ashes twice to conrm.
To turn the alarm off, press the button again and hold for at least
3 seconds. The relevant LED ashes once.
Fixed.
T3 Turns the Motor on at speed three.
Press and hold the button for approximately 3 seconds, with all the
loads turned off (Motor and Lights), to perform a reset. The LED
S1 ashes three times.
Fixed.
T4 Turns the Motor on at INTENSIVE Speed.
This speed is timed to run for 10 minutes. At the end of this time,
the system returns automatically to the speed that was set before.
If it is activated with the motor turned off, the hood will switch to
OFF at the end of the time.
Press and hold for 3 seconds to enable the remote control,
indicated by the LED ashing twice.
Press and hold for 3 seconds to disable the remote control,
indicated by the LED ashing just once.
Fixed.
S1 Signals the Metal Grease Filter saturation alarm, indicating that it
is necessary to wash the lters. The alarm is triggered after the
Hood has been in operation for 100 working hours.
Fixed.
When this is activated, it signals the Activated Charcoal Filter
saturation alarm, indicating that the lter must be changed; the
Metal Grease Filters must also be washed. The Activated Charcoal
Filter saturation alarm comes into operation after the Hood has
been working for 200 hours.
Flashing.
6
REMOTE CONTROL
The appliance can be controlled using a
remote control powered by a 1.5 V carbon-
zinc alkaline batteries of the standard LR03-
AAA type (not included).
Do not place the remote control near to
heat sources.
Used batteries must be disposed of in the
proper manner.
REMOTE CONTROL PANEL
LIGHTING
Motor Motor On / Off
-
Decreases the
working speed each
time it is pressed.
-
Increases the
working speed each
time it is pressed.
Intensive
Activates the
Intensive function
- -
Light Lights On / Off
436005483_01 - 110928
www.aeg.com/shop
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

AEG X79283MG0 User manual

Category
Cooker hoods
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI