Fire Magic Refrigerator and Kegerator Trim Kit User manual

REV 0 - 1510211320

L-C2-490

ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746

Fig. 1-1 Create cutout

This trim kit is for installation with a Fire Magic Refrigerator

or Kegerator. To install, follow the steps below:

WARNING: The trim kit is only for installation in islands

with open enclosures (for ventilation reasons).

DO NOT use this trim kit in closed/sealed

enclosures.

1. Follow all instructions in the appliance owner's manual

regarding the preparation and installation of the

appliance. Do not insert the appliance into the cutout

at this time.

2. Place the trim kit into the cutout, and fasten it into the

enclosure using the pilot holes and appropriate hardware

(see Fig. 1-2).

3. Install the appliance as instructed in the appliance

owner's manual.

INSTALLER: Leave these instructions with consumer.

CONSUMER: Retain for future reference.

Refrigerator / Kegerator

Trim Kit

Part # 3808

Fig. 1-2 Install trim kit

Refrigerator shown

This manual is also suitable for