Page is loading ...
GENESIS HV55
WIRELESS GAMING HEADPHONE
User Manual
Please read before using this headphone
FEATURES
Compatible to PS3/XBox360/PC/Wii (No MIC function on Wii)
Game Music Volume Control / Chat Volume Control
4 Types of EQ ( Normal / Bass / Treble / Bass & Treble)
Auto Sleep Function on Headphone for Power Saving
Mute button for Microphone
Operation Distance up to 10 Meters*
Transmitter that charges additional Batteries
No driver need when PC used. (XP/WIN7/MAC OS)
* Distance of Line-of-Sight *
COMPONENT PART LIST
1. Headphone Receiver
2. Wireless Transmitter with Built-In AAA Size Battery Charger
3. Flexible Microphone
4. Microphone Cable (for Xbox 360 Connection Only)
5. USB Cable (for PS3/Wii/PC Connection)
6. RCA Cable
7. AC/DC Adaptor
8. 2 in 1 RCA Adapter (2 pieces)
9. Rechargeable NiMH AAA Size Batteries for Headphone (2 pieces)
COMPONENT INDENTIFICATIONS (TRANSMITTER)
1. Transmitter Main Housing
2. Battery Compartment for Spare Battery Charging
3. LED Indicator of CHARGE
4. LED Indicator of SIGNAL
5. LED Indicator of POWER
6. RCA Port
7. Mini USB Port
8. DC Power Input
9. Power ON/OFF Switch
COMPONENT INDENTIFICATIONS (HEADPHONE RECEIVER)
1. Headband
2. Headband Extension
3. Ear Cushion
4. LED Indicator of SIGNAL
5. Game Music Volume and Effect Control – no function when using the device on PC
6. Microphone Mute Button
7. Volume Control of Microphone (User/Buddies) – music volume control when using the device on PC
8. 2.5mm Port for Microphone Cable (for Xbox 360 Connection Only)
9. 3.5mm Port for Flexible Microphone (for PS/Xbox 360/PC Connection)
10. Lock of Battery Door
11. LED Indicator of POWER
12. Power On/Off
13. Battery Door
INSTALLATION (HEADPHNE RECEIVER)
5. Unlock the Battery Door.
6. Insert Two NiMH AAA Size Batteries.
7. For PS3/Xbox 360/PC user, insert the Flexible Microphone into the Port,
rotate it counterclockwise to lock in position. Once the Mute Button
is pressed, LED Indicator on the Microphone will glow.
8. For Xbox360 user, insert the Microphone Cable
into the Port, rotate it counterclockwise to
lock in position.
PAIRING OF HEADPHONE RECEIVER
5. Switch on the Headphone Receiver.
6. Press and Hold the “ Effect Button “ for approximately 3 seconds, LED Indicator of Signal will blink
in Color Green.
7. Switch on the Transmitter.
8. Bring the Headphone Receiver close to the Transmitter (<50CM) until the LED Indicator of Signal
glows constantly in Color Green. Pairing is now succeed.
INSTALLATION (TRANSMITTER)
Connection to PS3 via Composite Cable & USB Cable
Connection to Xbox360 via Composite Cable
Connection to Wii via Composite Cable
Connection to PC via USB Cable
Button no. 7 is used for volume control when using the device on PC platform.
DEFINING AUDIO OUTPUT (PS3)
Settings > Sound Settings > Audio Output Settings > Audio Input Connector / Scart / AV Multi
DEFINING AUDIO INPUT (PS3)
Settings > Accessory Settings > Audio Device Settings > Input / Output Device : DGH100
SPARE BATTERY CHARGING
1. Slide and remove the Battery Door.
2. Insert Two NiMH AAA Size Batteries.
3. LED Indicator of CHARGE will indicate the charging status.
IMPORTANT
1. Switching Off
a) For protection of the transmitter and power saving, the transmitter will be switched off
automatically if there is no audio source signal for approximately 3 minutes. If the audio
source signal returns, the transmitter will be automatically switched on. Then, power on
the headphone again.
b) The headphone will be switched off automatically if there is no signal from the transmitter
for 3 minutes.
3. Use the rechargeable AAA batteries with correct Polarity
4. To ensure a long service life, fully charge the batteries before using the headphone for the first
time. According to the capacity of the rechargeable battery included, the battery charging
process will take approximately 5 to 7 hours.
This device must be used with the AC/DC adaptor supplied in the package.
INSERTING THE BATTERIES
• Remove the battery compartment cover on the headset
• Fit in a pair of AAA batteries in the battery cabinet
• Close the battery compartment cover properly
WARNING
• Never attempt to recharge any conventional dry cells.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
• When the headphones are not in use, switch it OFF to avoid damaging the batteries.
• Excessive sound pressure from headphones and prolonged hearing can cause hearing loss.
TECHNICAL SPECIFICATION
Transmission Mode : UHF Stereo
Carrier Frequency : 2.4GHz Digital
Operation Voltage : Transmitter, DC 5V 500mA
Headphone, 2 x AAA size Rechargeable NiMH batteries (included)
Frequency Response : 35Hz~ 22KHz
Distortion : <1.0%
S/N Ratio : >70dB
Operation Distance : Up to 10 meters
GENERAL
- Non-authorized repairs or taking the device to pieces make the warranty void and may cause the
product damage.
- Do not use the product in low and high temperatures and in the dusty atmosphere.
- The safe product, conforming to the EU requirements.
- The product is made in accordance with RoHS European standard. The standard was issued in
order to decrease the amount of the electronic and electrical waste emitted into the atmosphere.
- The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home
waste. You protect the environment when you recycle hazardous waste appropriately. In order to get
detailed information about recycling this product please contact your retailer or a local authority.
- All electric and electronic devices have to be disposed of independly from communal waste by
designated institutons. Correct disposal of used electronic devices helps to prevent natural enviroment
pollution.
/
