2
1. DC12V Input Terminal
This terminal is for connecting the 12V DC regulated power supply cord.
2. Video Output Connector (VIDEO OUT)
This is connector is for connecting with the VIDEO IN connector of the video
monitor.
Features
1. 380 TV lines of horizontal resolution and high quality picture.
2. Built in Auto Electronic Shutter.
3. Minimum illumination of 0.5 Lux / F2.0
4. Signal-to-noise ratio of 46dB.
5. High reliability under long time operation.
Connections
1. Connect a video terminal of the camera (VIDEO) and the video input terminal of
the video monitor with a 75Ωcoaxial cable.
2. Connect the power terminal of the camera to a 12V DC regulated power supply.
Standard Accessories
1. Main Body * 1
2. Power and Video cable
3. Instruction Manual * 1
1. Please use correct power adaptor, DC12V (regulated), to
operate this unit. The power tolerance of this unit is DC 12V ±
10% (DC10.8V~13.2V), over maximum DC13.2V power input
will damage this unit.
2. Video output (BNC connector) of this unit can be only connected
to monitor. Please check the wiring of video output before powe
on. If the power is connected to the video output, the unit will
be damaged.
CAUTION