Algoma 4750BR Operating instructions

Brand: Algoma

Model: 4750BR

Type: Operating instructions

Algoma 4750BR is a C-Frame stand, designed for hanging chairs. It's made of durable materials and can hold up to 275 lbs. Assembly is easy with the included tools, and the stand features a clip hook for attaching the chair. For safety, always inspect the stand before use and never exceed the weight capacity. Enjoy relaxing in your hanging chair with the Algoma 4750BR!

C Frame Stand Assembly Instructions

Model Number 4750BR

*** Parts **

(A) Leg Pieces (2)

(B) Lower upright (1)

(D) Upper upright (1)

(E) Lock nuts (2)

(F) Long bolts (2)

(G) Short bolts (4)

(H) Washers (6)

(I) Clip hook (1)

(J) Wrench (1)

(K) Allen wrench (1)

(A)

(B)

(D)

(C)

(E) (F) (G)

(H)

(I)

(J) (K)

1. Locate the two leg pieces (A) and fit together as shown in Figure 1.

2. Insert a long bolt (F) through the bottom hole of the two leg pieces, and place a washer (H), and lock nut (E) on

end of bolt, and tighten so nut is just on the bolt. Figure 2.

3. Place lower upright (B) onto leg assembly, and insert second long bolt (F) through upper hole in leg assembly

and through aligned hole in lower upright piece. Attach washer (H) and lock nut (E). Now tighten both the

lower and upper bolts securely using the wrench (J) and Allen wrench (K), as in Figure 3.

4. Place middle upright (C) onto lower upright, aligning holes as in Figure 4. Insert short bolts (G) with washers

(H) into the two lower holes, and tighten using the Allen wrench (K) as in Figure 5.

5. Place the upper upright (D) onto the middle upright aligning holes as in Figure 6, Then insert short bolts (G)

with washers (H) into the two upper holes and tighten securely using the Allen wrench (K) as in Figure 7.

6. Attach clip hook (I) to loop towards the top of upper upright as in Figure 8.

7. Attach your hanging chair to the stand by clipping the O-ring of the chair into the clip hook.

CAUTION! Do Not Jump Or Bounce In The C-Frame Stand; Doing So May Cause Serious Injury

The C-frame has a maximum weight capacity of 275 lbs. Do not exceed maximum weight capacity. Always inspect hooks, hardware, and

make sure bolts are tightened securely before each use. If hardware has become compromised in any way, do not use the product as it may

be unsafe and using the stand could cause injury. Always inspect the overall condition of this product before each use. Never allow children

to use the C-frame stand without adult supervision.

Care Instructions:

For maximum life of this product, Algoma recommends putting the item indoors when not in use.

Clean the frame using a mild soap and water, scrubbing when necessary. Dry with cloth.

** DO NOT RETURN

TO RETAILER! **

Please call

customer service

for missing parts.

1-800-295-6758

2/12 Sun

djs

Figure 1 Figure 2 Figure 3

Figure 4

Figure 5 Figure 6

Figure 7 Figure 8

Algoma 4750BR Operating instructions

Brand: Algoma

Model: 4750BR

Type: Operating instructions

Download PDF

report

Algoma 4750BR Operating instructions

Algoma 4750BR Operating instructions

Related papers

Other documents