Sharp FSB4214B User manual

Category
Mounting kits
Type
User manual

This manual is also suitable for

01/30/04
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]
INSTALLATION INSTRUCTIONS
FSB-4214
FLAT PANEL DISPLAY ADAPTER PLATE
For Sharp LC-10A3U
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
(1) Adapter Bracket (4) M4 X 6mm Phillips Pan Head Screws
(4) Nylon Spacer (4) M4 X 16mm Flat Head Machine Screws
(1) 1/8” Hex Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
FLAT PANEL DISPLAYS ARE EXTREMELY FRAGILE.
1. Remove table stand from back of display.
2. Place Nylon spacers over four mounting holes.
3. Align four countersink holes with mounting holes on back of display and secure using (4) M4 flat head screws.
Optional VESA mounting:
4. Using 1/8” hex key, remove four mounting buttons from bracket.
5.
Using four tapped holes of interface bracket and M4 X 6mm Phillips screws (provided), secure adapter bracket
to any mounting device using a 75mm x 75mm VESA pattern.
CAUTION!
Figure 1
Figure 2
  • Page 1 1

Sharp FSB4214B User manual

Category
Mounting kits
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI