Standard Components
Don’t connect the devices to the power pack
while charging from the AC Wall charger.
Discharge and recharge this power pack
periodically if you don’t plan to use it for
an extended period of time.
Do not expose the product directly under
the sun and any places with high
temperature or humidity.
The Battery Pack is recyclable.
Please help the Planet Earth by recycling it.
AC to DC Wall Charger 5V 2A (Pic. 2)
,
2.How to charge your mobile
devices from power pack:
Please observe the safety precautions listed in this page carefully.
Do not expose the product to fire and
other places with high temperature
Do not expose the product to water
Do not use incompatible AC charger to
recharge FTB12000DUO
Do not short circuit the positive “+” and
negative “–”
45 C
0 C
-10 C
The best using temperature is
between
-10℃~45℃
Check the power pack capacity of FTB12000U prior to use:
Battery Capacity Indicator and Working Status of Power:
Safety Precautions
Product Features
Operation Guidance
Product Maintenance Trouble Shooting
DC Input Connector
USB Out 2
Connector
USB Out 1
Connector
Power On/Off/Check Push button
LED Indicator
1.How to charge via
Wall
AC-to-DC power charger
:
USB OUT
FTB12000DUO Power Pack (Pic. 1)
Empty. Time to recharge
Low capacity (<20%)
Middle capacity (>50%)
High capacity (>75%)
Remarks: LED light - on
LED light – off
Suitable for all products
Stop using if any of the following
conditions occurred: electrolytic liquid
leakage, overheating, color change, or
any other unusual conditions.
1. FTB12000DUO power-pack (Pic. 1)
2. AC to DC Wall Charger 5V 2A (Pic. 2)
3. USB cable (Pic. 3)
Problems Possible Causes Corrective Actions
1. The charging time is not enough.
2. The power-pack or the adapters fail.
The power-pack cannot be
fully charged even after being
recharged for a long time.
1. Charge the power-pack
for about 7 hours.
2. Contact your retailer.
The power-pack stops working
suddenly, and/or the capacity
indicator turn off even though
there are some capacities.
The power-pack may be overloaded,
but it is not likely to be damaged.
Press power on to activate
the power-pack.
The power-pack fails
to supply power to devices.
1. The capacity is very low.
2. Poor connection between components.
3. Improper connector.
4. The power-pack doesn’t charge
certain devices.
1. Recharge the power-pack.
2. Reconnect, or replace the
cable and/or connector.
3. Select proper connector.
4. Contact your retailer.
The power remained in the
power-pack cannot be read.
1. Capacity is used up.
2. The capacity indicator is broken.
3. The power-pack is broken.
1. Recharge the power-pack.
2. Contact your retailer.
Contact Information
Thank you for purchasing mobile power pack FTB12000DUO, a super high capacity rechargeable
battery which can provide power to iPhone all generation, iPod touch all generation, iPod Nano all
generation, iPad all generation, mobile phones(including HTC/Samsung/Moto/Blackberry/Nokia and
others), MP3 player, MP4 player, PDA, Bluetooth, Digital Camera, Game player and more.
It can also provide power to Digital Camcorder, E-book reader, Portable DVD, Portable TV and more.
Before using this product first time, please read below carefully and follow all instructions and
warnings. It is also strongly recommended that you keep the manual for future reference.
ICONBIT LIMITED
Suite 1604-5, Wilson House, 19-27 Wyndham Street, Central, Hong Kong.
Tel: (852) 2523 2167
Fax: (852) 2810 1957
Service and Support: If you have problems installing or using the product,
Power Pack FTB12000DUO Manual
4. PCS connectors (Pic. 4 - Pic. 8)
5. User manual
6. Pouch
2. Main Parameter
Battery type: Li-ion polymer battery
Life cycle: ~500 cycles
Nominal Input: DC 5V, 2A
USB Out1: DC 5V, 1A
USB Out2: DC 5V, 2.1A
Capacity: 12000 mAh@3.7V (44.4Wh)
Size: 99 x 93 x 29mm
Weight: 285g
Using Temperature: -10 °C~45 °C
Charging Time: about 7 hours
Samsung Galaxy ( Pic.8 )
Mini USB ( Pic.5 )
Nokia ( Pic.7 )
Micro USB ( Pic.4 )USB cable (Pic. 3),
iPad ( Pic.6 )