Philips 220S2 User manual

EN User manual 1

Customer care and warranty 32

Troubleshooting & FAQs 44

220S2

plus

www.philips.com/welcome

Table of Contents

1 Important

1.1 Safety precautions and maintenance ............... 1

1.2 Notational Descriptions ......................................... 2

1.3 Disposal of product and packing material.... 3

2 Setting up the monitor

2.1 Installation ....................................................................... 4

2.2 Operating the monitor ........................................... 5

2.3 Remove Base Stand and Base ............................. 7

3 Product information

3.1 SmartImage .................................................................... 9

3.2 SmartContrast .............................................................10

3.3 SmartSaturate ..............................................................11

3.4 SmartSharpness ..........................................................11

3.5 Philips SmartControl Premium .......................... 12

3.6 Philips Pixel Defect Policy ......................................20

4 Technical Specifications ................................. 22

4.1 Resolution & Preset Modes..................................25

4.2 Automatic PowerSaving ..........................................25

5 Regulatory Information ................................. 26

6 Customer care and warranty ...................... 32

7 Troubleshooting & FAQs

7.1 Troubleshooting ..........................................................44

7.2 SmartControl Premium FAQs ............................ 46

7.3 General FAQs .............................................................. 48

1

This electronic user’s guide is intended for anyone

who uses the Philips monitor. Take time to read

this user manual before you use your monitor.

It contains important information and notes

regarding operating your monitor.

The Philips guarantee applies provided the

product is handled properly for its intended use,

in accordance with its operating instructions and

upon presentation of the original invoice or cash

receipt, indicating the date of purchase, dealer’s

name and model and production number of the

product.

1.1 Safety precautions and maintenance

Warnings

Use of controls, adjustments or procedures other

than those specified in this documentation may

result in exposure to shock, electrical hazards

and/or mechanical hazards.

Read and follow these instructions when

connecting and using your computer monitor.

Operation

• Keepthemonitoroutofdirectsunlightand

away from stoves or any other heat source.

• Removeanyobjectthatcouldfallinto

ventilation holes or prevent proper cooling

of the monitor’s electronics.

• Donotblocktheventilationholesonthe

cabinet.

• Whenpositioningthemonitor,make

sure the power plug and outlet are easily

accessible.

• Ifturningoffthemonitorbydetachingthe

power cable or DC power cord, wait for 6

seconds before attaching the power cable or

DC power cord for normal operation.

• Pleaseuseapprovedpowercordprovided

by Philips all the time. If your power cord

is missing, please contact with your local

service center. (Please refer to Customer

Care Consumer Information Center)

1. Important

• Donotsubjectthemonitortosevere

vibration or high impact conditions during

operation.

• Donotknockordropthemonitorduring

operation or transportation.

Maintenance

• Toprotectyourmonitorfrompossible

damage, do not put excessive pressure on

 theLCDpanel.Whenmovingyourmonitor,

grasp the frame to lift; do not lift the

monitor by placing your hand or fingers on

the LCD panel.

• Unplugthemonitorifyouarenotgoingto

use it for an extensive period of time.

• Unplugthemonitorifyouneedtocleanit

with a slightly damp cloth. The screen may

be wiped with a dry cloth when the power is

off. However, never use organic solvent, such

as, alcohol, or ammonia-based liquids to

clean your monitor.

• Toavoidtheriskofshockorpermanent

damage to the set, do not expose the

monitor to dust, rain, water, or excessive

moisture environment.

• Ifyourmonitorgetswet,wipeitwithdry

cloth as soon as possible.

• Ifforeignsubstanceorwatergetsinyour

monitor, please turn the power off

immediately and disconnect the power cord.

Then, remove the foreign substance or

water, and send it to the maintenance center.

• Donotstoreorusethemonitorin

locations exposed to heat, direct sunlight or

extreme cold.

• Inordertomaintainthebestperformance

of your monitor and use it for a longer

lifetime, please use the monitor in a location

that falls within the following temperature

and humidity ranges.

o

Temperature: 0-40°C 32-95°F

o

Humidity: 20-80% RH

2

• IMPORTANT:Alwaysactivateamoving

screen saver program when you leave your

monitor unattended. Always activate a

periodic screen refresh application if your

monitor will display unchanging static

content. Uninterrupted display of still or

static images over an extended period may

cause “burn in”, also known as “after-imaging”

or “ghost imaging”, on your screen.

"Burn-in", "after-imaging", or "ghost imaging" is a

well-known phenomenon in LCD panel

technology. In most cases, the “burned

in” or “after-imaging” or “ghost imaging” will

disappear gradually over a period of time

after the power has been switched off.

Warning

Severe” burn-in” or “after-image” or “ghost image”

symptoms will not disappear and cannot be

repaired. The damage mentioned above is not

covered under your warranty.

Service

• Thecasingcovershouldbeopenedonlyby

qualified service personnel.

• Ifthereisanyneedforanydocumentfor

repair or integration, please contact with

your local service center. (please refer to the

chapter of "Consumer Information Center")

• Fortransportationinformation,pleaserefer

to "Technical Specifications".

• Donotleaveyourmonitorinacar/trunk

under direct sun light.

Note

Consult a service technician if the monitor does

not operate normally, or you are not sure what

procedure to take when the operating instructions

given in this manual have been followed.

1.2 Notational Descriptions

The following subsections describe notational

conventions used in this document.

Notes,CautionsandWarnings

Throughout this guide, blocks of text may be

accompanied by an icon and printed in bold or

italic type. These blocks contain notes, cautions or

warnings. They are used as follows:

Note

This icon indicates important information and tips

that help you make better use of your computer

system.

Caution

This icon indicates information that tells you how

to avoid either potential damage to hardware or

loss of data.

Warning

This icon indicates the potential for bodily harm

and tells you how to avoid the problem.

Some warnings may appear in alternate formats

and may not be accompanied by an icon. In such

cases, the specific presentation of the warning is

mandated by the relevant regulatory authority.

3

1.3 Disposal of product and packing

material

Waste Electrical and Electronic Equipment-

WEEE

This marking on the product or on its packaging

illustrates that, under European Directive 2002/96/

EC governing used electrical and electronic

appliances, this product may not be disposed

of with normal household waste. You are

responsible for disposal of this equipment through

a designated waste electrical and electronic

equipment collection. To determine the locations

for dropping off such waste electrical and

electronic, contact your local government office,

the waste disposal organization that serves your

household or the store at which you purchased

the product.

Your new monitor contains materials that can be

recycled and reused. Specialized companies can

recycle your product to increase the amount of

reusable materials and to minimize the amount to

be disposed of.

All redundant packing material has been omitted.

Wehavedoneourutmosttomakethepackaging

easily separable into mono materials.

Please find out about the local regulations on how

to dispose of your old monitor and packing from

your sales representative.

Recycling Information for Customers

There is currently a system of recycling up and

running in the European countries, such as The

Netherlands, Belgium, Norway, Sweden and

Denmark.

In Asia Pacific, Taiwan, the products can be taken

back by Environment Protection Administration

(EPA) to follow the IT product recycling

management process, detail can be found in web

site www.epa.gov.tw

The monitor contains parts that could cause

damage to the nature environment. Therefore, it is

vital that the monitor is recycled at the end of its

life cycle.

For help and service, please contact Consumers

Information Center or F1rst Choice Contact

Information Center in each country.

4

2.1 Installation

Package contents

220S2/220S2

plus

2. Setting up the monitor

Install base stand

220S2

1. Place the monitor face down a smooth

surface taking care to avoid scratching or

damaging the screen.

2. Hold the monitor base stand with both

hands and firmly insert the base stand into

the base column.

220S2

plus

1. Place the monitor face down a smooth

surface taking care to avoid scratching or

damaging the screen.

2. Hold the monitor base stand with both

hands and firmly insert the base stand into

the base column.

3. Attach the monitor base stand to the base

column then fasten base stand.

Caution

Do not release the height adjustment pin lock

from the base column before the base stand is

firmly fixed.

Monitor

Quick start guide

Base stand

EDFU CD

Power cord VGA signal cable (optional) DVI cable (optional)

Register your product and get support at

www.philips.com/welcome

220S2

Monitor LCD / Monitor LCD / LCD-Monitor / Monitor

LCD / LCD监视器 / РК-монитор / LCD-монитором

Quick start guide

Installation / Installation / Instalación / Installation / Installazione / 安装 / Інсталяція

/ Установка

Connect / Connectivité / Conectividad / Verbindungsfähigkeit / Connettività /

连接性 / Підключитися / Подключиться

Adjust ergonomic / Réglages ergonomiques / Ajustes ergonómicos / Ergonomische /

Einstellmöglichkeiten / Regolazioni ergonomiche / 人体工程学调整 /

Регулювати ергономічне / Настройка эргономики

Guide de démarrage rapide / Guía rápida / Kurzanleitung / Guida rapida /

快速入门指南 / Швидке керівництво для початку експлуатації /

Краткое руководство по запуску

LCD Monitor

Philips and the Philips’ Shield Emblem are registered trademarks of

Koninklijke Philips Electronics N.V. and are used under license from

Koninklijke Philips Electronics N.V.

©

2

0

1

0

K

o

n

i

n

k

l

i

j

k

e

P

h

i

l

i

p

s

E

l

e

c

t

r

o

n

i

c

s

,

N

.

V

.

A

l

r

i

g

h

t

s

r

e

s

e

r

v

e

d

.

U

n

a

u

t

h

o

r

i

z

e

d

u

p

l

i

c

a

t

i

o

n

i

s

a

v

i

o

l

a

t

i

o

n

o

f

a

p

l

i

c

a

b

l

e

l

a

w

s

.

M

a

d

e

a

n

d

p

r

i

n

t

e

d

i

n

C

h

i

n

a

.

V

e

r

s

i

o

n

M

2

0

S

5

B

.

0

V

6

0

1

.

0

1

CLICK!

DON’T

CLICK!

5

Connecting to your PC

Kensingtonanti-thieflock

AC power input

DVI-D input (available for selecting

model)

VGA input

Connect to PC

1. Connect the power cord to the back of

the monitor firmly.

2. Turn off your computer and unplug its

power cable.

3. Connect the monitor signal cable to the

video connector on the back of your

computer.

4. Plug the power cord of your computer

and your monitor into a nearby outlet.

5. Turn on your computer and monitor.

If the monitor displays an image,

installation is complete.

2.2 Operating the monitor

Front view product description

: To access the OSD menu

: Return to previous OSD level

: dim down to 60% of brightness level

by one touch

: To switch monitor’s power ON and OFF

: To adjust brightness of this monitor

: To adjust the OSD menu

: There are six modes to be selected.

Office, Photo, Movie ,Game,

Economy, and Off

Description of the On Screen Display

What is On-Screen Display (OSD)?

On-Screen Display (OSD) is a feature in all Philips

LCD monitors. It allows an end user to adjust screen

performance or select functions of the monitors

directly through an on-screen instruction window. A

user friendly on screen display interface is shown as

below:

Basic and simple instruction on the control keys

In the OSD shown above users can press

buttons

at the front bezel of the monitor to move the cursor,

OK to confirm the choice or change.

43

2

4

3

2

1

67

5

4

2

13

67

5

4

2

13

6

Physical Function

Tilt

Swivel

Height adjustment

Note

Remove the height adjustment pin lock before

adjusting the height.

Insert the height adjustment pin lock before lifting

the monitor.

The OSD Menu

Below is an overall view of the structure of the

On-Screen Display. You can use this as a reference

when you want to work your way around the

different adjustments later on.

Main menu

Input

Sub menu

VGA

DVI (available for selective models)

Picture

Picture Format - 4:3, Wide screen

Brightness

Contrast

Color

Color Temp. - 5000K, 6500K, 7500K, 8200K, 9300K, 11500K

sRGB

Language

English, Español, Fran

ç

ais, Deutsch, Italiano

Português, Pycck

ИЙ

,

簡體中文

User Define Red

Green

Blue

SmartContrast - On, Off

OSD Settings

Horizontal

Vertical

Transparency - Off, 1, 2, 3, 4

OSD Time out - 5, 10, 20, 30, 60

Gamma - 1.8, 2.0, 2.2, 2.4, 2.6

Setup

Power LED - 0, 1, 2, 3, 4

H. Position - 0 ~ 100

Resolution Notification - On, Off

Reset - Yes, No

V. Position - 0 ~ 100

Information

Phase - 0 ~ 100

Clock - 0 ~ 100

Auto

Resolution notification

This monitor is designed for optimal performance

at its native resolution, 1680x1050@60Hz.

Whenthemonitorispoweredonatadifferent

resolution, an alert is displayed on screen: Use

1680x1050@60Hz for best results.

Display of the native resolution alert can be

switched off from Setup in the OSD (On Screen

Display) menu.

-65

65

70mm

-65

65

70mm

(220S2/220S2

plus

)

(220S2

plus

)

(220S2

plus

)

7

2.3 Remove Base Stand and Base

Remove the Base Stand

220S2

Place the monitor face on a safe surface, release

the stand lock and pull the base stand away from

the base column.

220S2

plus

Before you start disassembling the monitor base,

please follow the instructions below to avoid

damage or injury.

1. Extend the monitor base to its maximum

height.

-65

65

70mm

2. Place the monitor face down on a smooth

surface, taking care to avoid scratching or

damaging the screen. Then lift the monitor

stand.

3. Release the lock of base stand then pull the

base stand away from the base column.

DON’T

8

Note

This monitor accepts a 100mm x 100mm

VESA-Compliant mounting interface.

Remove the Base

Condition:

•

For VESA standard mounting applications

220S2/220S2

plus

1. Remove the 8 screw covers.

2. Remove the 4 screws and then remove the

base from the monitor.

220S2

100mm

9

3.1 SmartImage

What is it?

SmartImage provides presets that optimize

display for different types of content, dynamically

adjusting brightness, contrast, color and sharpness

inrealtime.Whetheryou'reworkingwithtext

applications, displaying images or watching a

video, Philips SmartImage delivers great optimized

monitor performance.

Why do I need it?

You want a monitor that delivers optimized display

all your favorite types of content, SmartImage

software dynamically adjust brightness, contrast,

color and sharpness in real time to enhance your

monitor viewing experience.

How does it work?

SmartImage is an exclusive, leading edge Philips

technology that analyzes the content displayed

on your screen. Based on a scenario you select,

SmartImage dynamically enhances the contrast,

color saturation and sharpness of images to

enhance the contents being displayed - all in real

time with the press of a single button.

3. Product information

How to enable SmartImage?

1. Press to

launch the SmartImage on

screen display;

2. Keeppressing

to toggle between Office,

Photo, Movie, Game, Economy and Off;

3. The SmartImage on screen display will

remain on screen for 5 seconds or you can

 alsopress”OK”tomakeconfirmation.

4. WhenSmartImageisenabled,thesRGB

scheme is disabled automatically. To use

sRGB you need to disable SmartImage

with the

button at the front bezel of

your monitor.

Except using

key to scroll down, you can also

press

buttons to choose and press “OK” to

confirm selection and close the SmartImage OSD.

10

There are six modes to be selected: Office, Photo,

Movie, Game, Economy and Off.

• Office: Enhances text and dampens

brightness to increase readability and reduce

eye strain. This mode significantly enhances

 readabilityandproductivitywhenyou're

working with spreadsheets, PDF files,

scanned articles or other general office

applications.

• Photo: This profile combines color

saturation, dynamic contrast and sharpness

enhancement to display photos and other

images with outstanding clarity in vibrant

colors - all without artifacts and faded

colors.

• Movie: Ramped up luminance, deepened

color saturation, dynamic contrast and razor

sharpness displays every details in darker

areas of your videos without color washout

in brighter areas maintaining a dynamic

natural values for the ultimate video display

• Game: Turn on over drive circuit for best

response time, reduce jaggy edges for fast

moving objects on screen, enhance contrast

ratio for bright and dark scheme, this profile

delivers the best gaming experience for

gamers.

• Economy: Under this profile, brightness,

contrast are adjusted and backlighting fine-

tuned for just right display of everyday office

applications and lower power consumption.

• Off: No optimization by SmartImage.

3.2 SmartContrast

What is it?

Unique technology that dynamically analyzes

displayed content and automatically optimizes

aLCDmonitor'scontrastratioformaximum

visual clarity and viewing enjoyment, stepping up

backlighting for clearer, crisper and brighter images

or dimming backlighting for clear display of images

on dark backgrounds.

Why do I need it?

You want the very best visual clarity and viewing

comfort for every type of content. SmartContrast

dynamically controls contrast and adjusts

backlighting for clear, crisp, bright gaming and

video images or displays clear, readable text for

officework.Byreducingyourmonitor'spower

consumption, you save on energy costs and

extend the lifetime of your monitor.

How does it work?

WhenyouactivateSmartContrast,itwillanalyse

the content you are displaying in real time to

adjust colors and control backlight intensity. This

function will dynamically enhance contrast for a

great entertainment experience when viewing

videos or playing games.

11

3.3 SmartSaturate

What is it?

Smart technology that controls color saturation,

the degree to which one on screen color is

blended in neighboring colors, to deliver rich and

vibrant images for more entertainment fun when

you are viewing videos.

Why do I need it?

You want rich, vibrant images for more

entertainment fun when viewing photos or

videos.

How does it work?

SmartSaturate dynamically controls color

saturation, the degree to which on-screen color

is blended in neighboring colors, to deliver rich,

vibrant display for more entertainment fun when

youareviewingimagesorvideosinyourdisplay's

Movie or Game mode. It is turned off for top

quality display of office application and in the

Economy mode to reduce power consumption.

3.4 SmartSharpness

What is it?

Smart technology that enhances sharpness when

you need it for ultimate display performance and

more entertainment fun when you are viewing

videos or photos.

Why do I need it?

You want the ultimate in sharpness for more

entertainment fun when viewing photos or videos.

How does it work?

Smart technology enhances sharpness when you

need it for ultimate display performance and more

entertainment fun when you are viewing videos or

photos in the Movie or Game mode. It is turned

off for top quality display of office applications

and in the Economy mode to reduce power

consumptions.

12

First launch -Wizard

• Thefirsttimeafterinstallationof

SmartControl Premium, it will automatically

 gotoWizardforfirsttimelaunch.

• Thewizardwillguideyouthrough

adjustment your monitor performance step

by step.

• YoucangotoPlug-inmenutolaunchwizard

later on as well.

• Youcanadjustmoreoptionswithoutwizard

by Standard pane.

3.5 Philips SmartControl Premium

The new SmartControl Premium software

by Phillips allows you to control your monitor

via an easy to use on-screen graphic interface.

Complicated adjustments are a thing of the past

as this user friendly software guides you through

fine-tuning resolution, Color calibration,

Clock/Phaseadjustments,RGBWhitepoint

adjustment, etc.

Equipped with latest technology in core algorithm

forfastprocessingandresponse,thisWindows

7 compliant eye catching animated Icon based

software is ready to enhance your experience

with Philips monitors!

Installation

• Followtheinstructionandcompletethe

installation.

• Youcanlaunchafterinstallationiscompleted.

• Ifyouwanttolaunchlater,youcaneither

click the shortcut on desktop or toolbar.

13

Start with Standard pane:

Adjust menu:

• AdjustMenuallowyoutoadjustBrightness,

Contrast, Focus, Position and Resolution.

• Youcanfollowtheinstructionanddothe

adjustment.

• Cancelpromptsuserifyouwanttocancel

installation.

14

Color menu:

• ColorMenuallowyoutoadjustRGB,

 BlackLevel,WhitePoint,ColorCalibration,

and SmartImage (Please refer to SmartImage

section).

• Youcanfollowtheinstructionanddothe

adjustment.

• Refertobelowtableforsub-menuitembase

on your input.

• ExampleforColorCalibration

1. "Show Me" starts color calibration tutorial.

2. Start - starts the 6-step color calibration

sequence.

3. Quick View loads the before/after images.

4. To return to Color home pane, click the

Cancel button.

5. Enable color calibration - by default is

on. If unchecked, does not allow for color

calibration to happen, dimes out start and

quick view buttons.

6. Must have patent info in calibration screen.

15

ECO

Theft Deterrence Pane will only be active when

selecting Theft Deterrence Mode from the drop-

down Plug Ins menu.

First color Calibration Screen:

• Previous button is disabled until the second

color screen.

• Next goes to the succeeding target

(6-targets).

• Final next goes File>Presets pane.

• Cancel closes the UI and returns to the plug

in page.

SmartImage

Allows user to change setting for better display

setting based on content.

WhenEntertainmentisset,SmartContrastand

SmartResponse are enabled.

16

To enable Theft Deterrence, clicking Enable Theft

Deterrence Mode button brings up the following

screen:

• User can enter PIN between 4 and 9 digits

numbers only.

• After entering PIN, Accept button takes user

to the pop-up dialog box on the following

page.

• Minimum minutes set to 5. Slider set to 5 by

default.

• Does not require the display be attached to

a different host to go into Theft Deterrence

mode.

After creating PIN, the Theft Deterrence pane will

indicate Theft Deterrence Enabled and provide

PIN Options button:

• Theft Deterrence Enabled is displayed.

• Disable Theft Deterrence Mode opens pane

screen on next page.

• PIN Options button only available after user

creates PIN, button opens secure PIN web

site.

Options>Preferences-Willonlybeactive

when selecting Preferences from the drop-down

Options menu. On a non-supported display

capable of DDC/CI, only the Help and Options

tabs are available.

• Displays current preference settings.

• A checked box enables the feature. The

check box is a toggle.

• Enable Context Menu on desktop is checked

(On) by default. Enable Context menu

displays SmartControl Premium selections

for Select Preset and Tune Display in the

desktop right-click context menu. Disabled

removes SmartControl Premium from the

right click context menu.

• Enable Task Tray icon is checked (On) by

default. Enable context menu shows the task

tray menu for SmartControl Premium. A right

click on the task tray icon displays the menu

options for Help, Technical Support. Check

 forUpgrade,About,andExit.WhenEnable

task tray menu is disabled, the task tray icon

will only display EXIT.

• Run at Startup is checked (On) by default.

 Whendisabled,SmartControlPremium will

not launch at start or be in the task tray. The

only way to launch SmartControl Premium is

either from the desktop short cut or from the

program file. Any preset set to run at startup

will not load when this box is unchecked

(Disabled).

• Enabletransparencymode(Windows7,

Vista, XP). Default is 0% Opaque.

17

Options>Input-Willonlybeactivewhenselecting

Input from the drop-down Options menu. On a

non-supported display capable of DDC/CI, only

the Help and Options tabs are available. All other

SmartControl Premium tabs are not available.

• Display the Source instruction pane and

current input source setting.

• On single input displays, this pane will not be

visible.

Options>Audio-Willonlybeactivewhen

selecting Volume from the drop-down Options

menu.

On a non-supported display capable of DDC/CI,

only the Help and Options tabs are available.

Option>Auto Pivot

18

Help>User Manual-Willonlybeactivewhen

selecting User Manual from the drop-down Help

menu. On a non-supported display capable of

DDC/CI, only the Help and Options tabs are

available.

Help>Version-Willonlybeactivewhenselecting

Version from the drop- down Help menu. On a

non-supported display capable of DDC/CI, only

the Help and Options tabs are available.

Context Sensitive menu

The Context Sensitive menu is Enabled by default.

If Enable Context Menu has been checked in the

Options>Preferences pane, then the menu will be

visible.

The Context Menu has four entries:

• SmartControl Premium-Whenselectedthe

About Screen is displayed.

• Select Preset - Provides a hierarchical menu

of saved presets for immediate use. A check

mark shows the currently selected preset.

Facoty Preset can also be called from the

drop down menu.

• Tune Display - Opens the SmartControl

Premium control panel.

• SmartImage - Check current settings, Office,

Photo, Movie, Game, Economy, Off.

Page is loading ...

Philips 220S2 User manual

Philips 220S2 User manual

Related papers

Other documents