Goldstar WG8000R Owner's manual

Brand: Goldstar

Model: WG8000R

Category: Split-system air conditioners

Type: Owner's manual

This manual is also suitable for

WG1000R

OWNER'S MANUAL

MANUAL DEL PROPIETARIO

ModelsiModelo WG8000R, WGi000R

para el futuro,

FOR YOUR RECORDS

Write the model andl serial numbers here:

Mode| #

_rial #

You can find them on a ia_l on the side of t_ pr_Juct,

D_ler's Nlame

Date Pu=mhas_

lib Staple you_-receipt to thiis page in the e_nt y_ nec_i it

to prove @'_ted purchase or for warran#/iSSLJ_.

READ THIS MANUAL

Inside you will find many _lpfu[ hind on how to use and

maintain your air condit[o_r pro_r]y. Just: a little pr@_entive

care on your _rt can _ve y_J a g_eat deal d time and

money over '[he life of your air cond_ioner,

You111find many answers to, common problems in the chart

of tr_bl_hoo_ing tips. ff you r_iew our chart of

Treubleshootingi Tips first, you may not _ to call for

serv'_e at all,

i' _,nta_ an Authorlz_ Service Center for repair or

maintenance of this unit. Call 1_00-2_-0000 to

locate the nearest ASC,

•This air conditioner is not internd_ for use by youn9

chil,dt_ ot invalids without supervision.

•Young _ildren shou|d be supervisedi tlo ensure that

th_ do not play with the air conditioner.

• If the power cord recluires replacement, have an

Authorized _rvicer install ;an exact rep|acement pa_.

• |ns_l|atton work mu_ he _rform_ in a_o_ance

with the National _lecttlc C_e iby qualified and

a_thorlzed per_,onnel onlyo

2 Room Air Conditioner

Sa_ Precautions

To prevent iniury to the user or other peop, le and property damage, the following instructions

must be foil,owed.

[] incorrect operation due to ignoring instructions wilil _us.e harm or diamage. The seriousness

is classified by the folio,wing indications.

[] Because of the weight of the product, it is r_ommended that you have a heiper to assist in

the installation.

[] Meanings of symbols us_ in this manua_ are as, shown below.

Biesure not to do 'i, _

B,esure to folio

[] Installation

• improper assembly or instaflation may cause

incorrect o_ratJon, including injury, fire, and

electric shock ha_rds,

_'_ ',4

• it may cau_ explosion or fire.

• It may cause fire and electric sh_k.

° it may cause failure and e]_ric sho_.

Own,er_ Manual 3

[] Operation

• _hetwise, it will cause

electric sh_k or fire

• i'twill _use electdc shock or

fire.

• _twilli cause et_tric shock or

fire_

• _herwise it may ,cau_ fire

and electdc shock a_iident.

• it will cause e_tdc sho_ or

fire.

, ,AYe'''¸ ........

• _tmay cause fire and ,ei_tri,c

shock,.

• litwill cause eliectric sh_k or

fire

o,No grounding may cause

el_"tric sh_k.

• It will cau_ electric sh_k.

4 Room Air Conditioner

. The air conditioner must be operated in a

enclosed area to,be most effective_

• Utmay cause .exp,losion, fire, and burn.

, Ut:wi!l cause electric shock or fai!lure of

machine.

, Water may enter me unit and degrade the

insulation. It may cause an elec#ic shock.

[] Installation

.They are sharp and may

cause injury,

• _ may _use failure o,f

appliance or performance

• If the o_er case is damaged,

it must be repair_ or

repi_aced immediately.

Leaving it damaged could

result in the air _nditioner

falling out o,fthe window,

creating a _fety hazard.

Owner_ Manual 5

° it may _use injury: • It may cau_ electric shock

and damage.

,. it will waste power

consumption in vain and it

may cause accident,

• Since the fan rotates at high

spe_ during o_ration, it may

cause injury.

• Operation without filters will

cause failure.

,,This oouUdiniure the pet or

plant,

• it is an air conditioner, not:a

precision refrigera_on system.,

•'Theap_arance of the air

conditioner may deteriorate,

change color_or develop

suffa_ flaws.

.,It is not sanitary and coulld

cause illness .o.r_r_nal

injury hazard,

....

6 Rc_m Air Conditioner

Befot'e Operation

1i' Plug in the, power cord properly.

2. Use a dedicated circuit. Overloading the line could create a fire hazard.

3. Iao not use an extension cord. See page 10 for more detaii]s.

4. Do not staWstop operation by plugging/unplugging the power cord.

5. IIfthe power cord is damaged and requires, replacement, have an Authorized

Servicer install an exact replacement part.

1i_ Being exposed to direct airflow for .an extended period o,ftime could b,e

hazardous to your health, Do, not expose occupants, pets, or plants to direct

airflow for extended periods of time.

2i_Due to the possibility of oxygen deficiency, ventilate the room when used

together with stoves or other heating devices,

3 Do not use this air conditioner for non-specified special purposes (e.g.

preserving precision devices, food, peR, p,lan_, and art objects). Such usage

could damage the, items.

43The air conditioner is a consumer comfort appliance, not a precision climate

control system.

1. Do not touch the metal parts of the unit when removing the filter. Injuries ,can

occur when handling sharp metal edges.

2. Do not use water to clean inside the air conditioner. Exposure t,owater can

destroy the insulation, leading to possible electric shock.

3. When cleaning the unit, first make sure that the power and breaker are turned

off. The, fan rotates at a very high speed during operation. There is a

possibility of injury if the unit's power is accidentally triggered on while

cleaning inner parts of the unit.

For repair and maintenance, contact an Authorized Service Center. See the,

warranty page for details or call ,(800),243-000& Have your model number and

serial number available. They should be written on page, 2 of this manual.

Owner_ Manual 7

Int_uction

This symbol aleds you to the risk of electric shock.

This symbol aleds you to haza_s that could cause harm to the

air conditioner.

CABINET

FRONT

GRILLE

A!R FILTER

This symbol indicates s_cial notes.

WARNING: This appliance should be ins_lled in accordance with

national Electric Code.

\LERTICALAIR DEFLECTOR

(HORIZONT_ LOUVER)

HOR_'ONTALAIR DEFLECTOR

NERTWCALLOUVER)

D_SCHARGE

AIR _NTAKE

(INLETGRILLE)

BRACE

EVAPOrCATOR_

CONTROL BOARD

REMOTE

CONTROLLER

CONDENSER

_BASEPAN

POWER CORD

VERTICAL AIR DEFLECTOR

4ORIZONT_ AIR DEFLECTOR

FRONT

AIR F_LTER

DISCHARGE

AiR iNTAKE

(INLET GiRiLLEi

C,ONTROLBOARD

B_E PAN

POWER CORD

8 Rc_m Air Conditioner

ElectricalSafety

WARNING: This appliance must be pro_rly grounded.

The power cord of this appliance is.equipped with a three-prong grounding plug.

To minimize the rusk of electric shock, use the plug with a standard three-slot

grounding wall power outlet.. IIfthe power outlet does not include a grounding slot,

have a qualified electrician replace the outlet before you use the room air

conditioner,.

Changing the outlet without making the appropriate wiring

changes will create an uncle condition that could result in fire or

electrical shock. Refer all such work to a licens_ and qualified

Pt_err_ method_

E_ _rsu_eFope_ground

exists before us4

WARNING: DO not cut or remove the grounding prong from tlhe _wer

WARNING: Attaching the adapter ground terminal to the wall

receptacle cover screw does not ground the appliance gnlesis the

cover screw is metal and not insulated, and the wall r_eptacle is

grounded through the house wiring.

W'ARNING: If you have any doubt whether the air conditioner is

properly ground_, have the wal! receptacle and cimuit ch_k_ by a

qualified electrician.

Owner_ Manual 9

We strongly discourage the use of an adapter due to potentia! safety h_ards.

For temporary connections, use only a UL-lis.ted adapter, available from most

local hardware stores. Ensure that the large slot in the adapter is aligned with

the large slot in the receptacle for a proper polarity connection.

To,disconnect the power cord from the adapter, use one hand on each to avoid

damaging the ground terminal. Avoiid frequently unplugging the power cord as

this can lead to eventual ground terminal damage,

"_Met_ Screw

WARNING: Never u_ the appliance with a broken adapter,

We strongly discourage the use of an extension ,cord due to potential safety

hazards.. For temporary situations, use only CSA certified and UL listed 3-wire

grounded extension cords, rated 15 A, 125 \,L

10 Room Air Conditionier

in,staflation

T/pe A:i6EA TypeB:3EA

_=::==:==::,,:2,,::_ . _

TypeD:2EA TypeE:2EA TypeF:2EA TypeG:2EA

(FRAMECURTAIN},

,j [-

1I'

Ty_ i,,,i:1_ TypeI:1EA TypeJ:t EA TypeK:2EA

(UPPERGUIDE}

TypeL:I EA Type M:!EA Type N:IEA Type O:1EA

(DRAINJOINT PIPE)

Have the, following tools available, for installation:

* Screwdriver (Slotted and Phillips) * Ruler

* Knife * Hammer

* Pencil * Level

Owners Manual 11

Installation

This room air conditioner is

designed for installation in standard

doubiehung windows with actual

opening widths from 22" to 36".

The upper andi lower window sash

must open sufficiently to al!ow a

clear ve_ical opening of i5" from the

bottom of the. upper sash to the

window stool.

WARNING:This product is a WINDOW AIR C,ONDITIONER. As such,

a standard single-hung ,or double-hung window is required for proper

installation. Non-window insta!lations, including using s!eeves, holes

in walls, and other installations are not recommended.

Select the best location

1. To prevent vibration and noise, make sure

the, unit: is !!installed securely and fiirmly

2. Install the unit where the sunlight does not

shine directly on the unit•

C_led air

3. The outside of the cabinet must extend _-.__.

outward for at least i i' and there should

be no obstacles, such as a fence or wall,./

within 20" from the back of the cabinet

because it will prevent Iheat radiation of the

Restriction d outside air will greatly r_uce

the c@!ing efficiency d the air conditioner.

Awning

Heat

radiation

1/2"

Over 20"

Fen_

•All side louver! o,fthe cabinet must remain expos_ to the outside of the

structure.

4. install the unit a little slanted so the back is slightly lower than the front(about V2")..

This will force condensed water to flow to the outside.

5. Install the unit with the bottom about 30"~60" above the fl_r level.

12 Room Air ,Cond#i_er

Ins_llation

1, Remove, the _rews which fasten the cabinet

a,tboth sides and at the back:,

Use a long screwdriver and installing the

screws will be easier.

2. Slide the unit from the cabinet: by gdpping the

base pan handle and pulling forward while

bracing the cabineL

3:. Cut the window sash sea[ to the proper

length

Peel off the backing and attach the Foam-Pe

to, the underside of the window sash.

Remove the backing from the top, Upper Guide

Fo,am-PE and attach it to the bottom of the

Upper Guioe

Attach the Upper Guide onto the top of the

cabinet with 3 Type A screws.

6. insert the Frame Guides into the bottom of

the cabinet,

Inse_ the Frame Cu_ain into the Upper Guide

and Frame Guides.

Fasten the cu_ains to the unit with 4 Type

A screws.

Foam Pe

(Type A) up#er G_ide

Screw

_ew

(Type A)

Frame Guides

(Type A)

Foarr_Pe

Frame

Owtt,e,¢_Manual 13

Installation

Caution: During the following step, hold unit firmly until window sash

is lowered to top channel behind side _nel frames. Per_nal injury or

property damage may result if unff falls from window.

Open the window, MaA a line on

_nter of'the window stool(or desired

air conditioner location),

Carefuffy place the cabinet on the

window stool and align the _nter

mark on the bottom fro,nt wi#_ the

center line marked in the window

stool,

Pull the bottom window sash down

behind the upper guide until it meets.

:Do not pul] the window _sh

down so tightly that the movement of

Frame Curtain is restricted

3. Loose,ly assemble Me sill support

using the parts in Figure 3.

4. Se]_;t the, _s,iti,on that wil!l place the

sift support near the outer most po,int

on sill (_e Figure 4)

° Be careful when you [nstaff

the _binet (:Frame Guid_ willl

broken easily),.

Attach the sift support to the cabinet

track holle in relatiion to the sel_ted

position using 2 Ty_ A screws in

each support(See Figure 4),

6 The cabinet should be [ns_lli_ wi#'l,a

ve_ slight tiff(about _!_"),downward

toward _e outside (S_ Figui_e,5)_

Adjust the _lt and the nut of sil!

support fo,r balancing t_hecabinet,,

7, Attach the cabinetto the window stool

by driving the screws ,(Type B:[,o,ength

sixteen millimeters and below.) through

the front angle into window stool

8, Puff ea_ Frame curtain fully to each

window sash track, and repeat step, 2.

Upper Guide

Window

Frame CuRa!n

Foam-Pc

Figure i

Figure 2

OUTDOOR

SillSuppom

Screw(Type A)

INDOOR

Screw(Type B}

Cabinet:

OUTDOOR Figure 4

Si_ Support

Scr_(Type IB)

S!HSuppeR:

Track

Figure 5

14 Room Air Conditioner

installation

9. A_ach each Frame Curtain the window sash

using screws, (Type C).(See Figure 6)

: DO NOT DRILL A HOLE IN THE

BO_'OM PAN, The unit is designed t,o operate

with approximately 1/2" of water in bottom pan,

Ty_ C

10. Sllide the unit into the cabinet.(See Figure 7)

•For security purpose, reinstall

_rews(Type A) at cabinet's sides,

Screw(Type A)

. Power Cord

1i1,0Cut the Foam-Strip to the proper length

and inse_ betw_n the upper window sash

and the Ilower window sash.

(See Figure 8}

Foam Strp

12. Attach the Window Locking Bracket with

a Ty_ C screw. (S_ Figure 9)

Window Locki_ng Bracket

13,.,Attach the front grille to the cabinet by

inserting the tabs on the ,grille into the tabs

on the front of the cabinet. Push the grille

in until it snaps into place. (See Figure 10)

14,.,Lift the inliet griiie and s_ure, it with a Type,

A screw through the front grille,

(See Figure 11)

15,. Wirtdow lrts'_llaitloty of room air conditto_r

is _w completed. _ ELECTRICAL DATA

for attaching _wer cord to e_trical outlet.

Figure il

Own'e,y_ Manual 15

Operating instructions

If you turn off the air cond_ioner or switch from cooling to

the fan, wait at least 3 minutes I_fore _tting to c_ling again..

Operation,

Off °Turns air _nditioner off.

Med Fan ° M_ speed fan o_ration without ®oling.

Low Fan - Low speed [an o[_rat_n without _oling,

High Cool - Cooling with high sp_d fan operation.

Med Cool - Cooling with mad sp_d tan o_ratJon,

Low Cooi - Co0,iingwith 10wspeed tan 0,peralion.

The_ostat

" This a_utomaticaBycontrols the tem_rat_._red the ind_[ air.

Turn t_ knob,soithat arrow points to _e Iiargermarks,for greater cooling,

Point the ,arrow[ot_ s,mal_r marks fa more rr_dera_e_aing.

(i.e. the higher [he humor, t_e greater the _oling}

FOR NORMAL. COOLING

1, Turn the operation switch to the High Cool or the Low Cool setting

2. Set the thermostat control to the desired temperature mark (the mid-_int is a

g_d starting _sition). If the room temperature is not satisfactory after a

reasonable time, adjust the con_"oi to a _oler or warmer setting, as

FOR MAXIMUM COOLING

i, Turn the operation switch to the High Cool setting.

2. Set the thermostat control to the Ilargiest temperature mark.

• = [ '

FOR QUIETER OPERATION

1, Turn the operation switch to the Low Cool se_ing.

2, Set the thermostat _ntrol as ne_.

16 Room Air Conditioner

Operatinginstructions

The centre,is ]!ooklike this"

e.]Oturn the air co_itio_r O,N,pushthe butt®. [o turn the,air conditionerOFF,pushthe huron again.

oThis _Jttontake. pdo,dtyovera_ other bu_ons.

eWhen the unitisfirst poweredup,itdefaultstosdtings of High _oli at7_

TEMPERATURE SETTING

• This b_on canautomatically/controlthe tem_rature ofthe r_. Thetem_ture can be set within a range

oif60°F to 86°F_ t°E(16°C to 30°Cby 1°C)

SelecttheI_er numberforI_er tem_r_u_e of Lher_m,

,mEv_rytime you #Jsh [his _[to,n, itwil t_31e _[we_i ,COOL,FAN, ar_ DRY.

ENERGY SAVER

• The fan stops when the _mpressor stops c_ing.

• Approximatelyev_y 3.minutest_ fain_will'_urn® and che_kthe_®rn airto _t,ermine i_c®ling _ ne_ed.

ON/OFF TIMER

- Stopping Operation

o E_h pros of the button cycl_ through the opt:ionsin this.o_der:

1Hour_2Hou_ --3Hours _4Hours _,5Hours-,-6Hours-,,

7Houis-,.8Hours._9Hours-,.lOHou_s.. 11H(_s ._12'Hours.,,CANCLE

e.'Theset t_r.ature will _ raised by 2_ after 30,minut_ and again after another 30 minutes.

- Starting Operation

• E_h press of the button cycl_ through the opt:bns in _is order:

1Hour-_2Hou_ -_3Hours-,.4Hours_5Hours -*6Hours

7Hourso 8Hours.*9Hours_ l_ou_ _ 11Hours_-12_{ours-- CANCEL

FAN SPEED

o, Pr_sing _e Fans_d buttontoggl_ _tween Low and High s_

REMOCON SIGNAL RECEIVER

Own,e,r_ Manual 17

OperatL_g tnstructions

_ AUTIO, N: The Remote Controller will not function properly if strong

light strikes the sen_r window of the air cond_ioner or' if there are,

obstacles between the Remote Controller and the air conditioner.

• To turn the Set ON, push the button. To,turn the, Set OFF, push the button again.

• Th_ bu_on takes p,riodtyover any other b_tons.

• When you first turn it on,,'the,set is on the High cool mo_ and the temp., at 72°F

T,emp,eratu_ S,e_ing

• Th_ Ibuttoncontrol the room temperature setting in a range

be_een 60°F to 86"_Fin I:'F increment,

Power

Fan Spe_

• Pressing the Fan Speed button togglesbetween Lowand High

spe_s..

OrdOff Timer

oStopping Operation

• Each press of the button cycl_ through the options in this

or_r:

IHour_ 2Hours_ 3Hours=_4Heurs-*5Hours_ 6Hours

7Hours-_SHours--PHours-*10Hours--11Hours-,.12Hour.s-_CANCLE,

• The set temperature will be rai,_dl by 2°F .after30 minutes and

again after ano_er 30 minutes.

- Starting O_ration

• Each press of the button oycl!esthrough the options in this

or_r:

1Hour-,.2Hours--3Hours_*4Hours--5Hours- 6Hours-*

7Hours_ 8Hours-*PHours-* 10Hours_ 11Hours_ 12Hours_ CANCLE.

Energy Saver

The fan stops when the compressor StOi_ COO_i_

• Approximately every 3 minutes the fan wil! turn on and

check the room air to determine if c_ling is n_d_.

• Ever#me you p,u_ this button, Hwil! t_g_e between COOL, FAN_and DRY,

How to Inert

1. Remove the _ver from the ba_ o_the remote

co,ntroHer

2. Inert two batteries,

, Be sure of tlhe _lar_y when installing the

batteries.

o Be sure that both batteries are new.

& Re-attach the cover.

• Do not u_ rechargeable

batteries. Suc:h batteries

differ from s_ndard dry _]]s

in shape, dimensions, and

performance..

• Remove the batteries, from

the remote oontroHer if the air

conditioner is.not going to be

used for an extended length

of time.

18 Room Air Co_,ditioner

Operating Instructions

Air Direction

The direction of air can be _ntrotlied wherever you

,want to,c_,U by adjusting the horizontal louver and

the vertical louver.

• HOiR/ZONTALAIR-DIR'ECTI_# C01'4TROL

The horizontal air direction is adjust_ by

rotating the verticall louver right or [eft.

• _RTICAL AIR_D'IRECTION CONTROL

The vertical! air direction is adjusted by

rotating the horizontal louver forward or

Drain Pi_

In humid weather, excess water may

,cause the Base Pan to overflow, To

drain the water, remove the Drain Cap

and s_ure the Drain Pipe to the rear

hole of the Base Pan

Press the drain pipe into, the hole by

pushing d_n and away from the fins

to avoid injury:

This air _nditio, ner is equipped with a

slinger fan. (.See drawing, below.)

The fan has an outer ring that runs in

tihewater that coJ!_ts in the base pan

if it gets deep. That _ndensate is then

pick_ up by the fan and expe[l_

through the condenser, making the air

_nditioner more efficient.

Ring

Be careful when inserting the drain pipe. IPush away from

the sharp fin area to avoid slipping injuring yourseff.

Owner's Manual 19

Maintenance and Service

Air Filter

Check the air filter at least twice a month to see if cleaning is neces_ry. Trapped

particles in the filter can build up and blink the airflow, r_ucing _oling capacity

and causing an accumulation of frost on the evaporaton To clean the air filter:

(a) (b) (c)

Lift the inlet grille,

Remove the air filter from the front grille by pulling the air filter up slightly:

Wash the fiJter using Iiukewarm water below 40 °C (104 °F),

Gently shake the excess water from the filter and replace.

:DO NOT operate the air conditioner without a hTter because dirt and lint will

clog # and reduce performance.

Cleaning the Air Conditioner

The front grille and Inlet grille may be

wip_ with a cloth dampened in a mild

detergent solution,

The cabinet may' be washed with mild

soap or detergent and lukewarm

water, then _lished with Liquid Wax

for Appliances.

To ensure continued peak efficiency,

the condenser coils (o.utside of unit).

should be checked periodically and

cleaned if clogg_ with s_t or dirt

from the atmosphere.

20 Room Air Co_,ditioner

Page is loading ...

Goldstar WG8000R Owner's manual

Brand: Goldstar

Model: WG8000R

Category: Split-system air conditioners

Type: Owner's manual

This manual is also suitable for

WG1000R

Download PDF

report

Goldstar WG8000R Owner's manual

This manual is also suitable for

Goldstar WG8000R Owner's manual

Related papers

Other documents