Sharkoon Nightfall U3 Specification

Sharkoon
Brand
Sharkoon
Model
Nightfall U3
Category
Computer cases
Type
Specification
NIGHTFALL U3
1
Handbuch
Manual
Manuel d‘utilisation
Guia usario
Manuale d´istruzioni
Gebruiksaanwijzing
Guia usário
Instukcja obstugi
使用手冊
NIGHTFALL U3
2
Content
1. Features 3
2. Package content 3
3. The case at a glance 5
4. Installation of a mainboard 7
5. Installation of a PSU 9
6. Installation of a HDD 10
7. Installation of an optical device 11
8. Installation of a 3.5" device 13
9. Installation of an add-on card 14
10. The pre-installed fan 15
11. Installation of additional fans / optimized airflow 15
Dear customer!
Congratulations for purchasing this premium quality SHARKOON product.
For a long life time and to take full advantage of this product we recommend that you read
this manual completely.
Have a good time with our product!
SHARKOON Technologies
NIGHTFALL U3
3
1. Features
• MidiATXcase
• 5x5.25"drivebays(external)
• 5x3.5"baysforHDDs(internal)
• Top I/O with 1x USB3.0, 2x USB2.0, 1x headphone and 1x microphone connector,
powerandresetbutton
• 7slotsforadd-oncards
• Aluminumfrontpanelwithairinlet
• QuickfastenersforopticaldrivesandHDDs,mainboardmountingpanelwithinstallation
opening for coolers
• 2openingsforwatercooling
• Cablemanagementsystem
• Fanconguration:
Case front
1x120mmLEDfanaswellas3-pinand4-pinconnector
(pre-installed)
Side panel 2x120mmfan(optional)
Backside 1x80mmor1x120mmfan(optional)
Toppanel 1x120mmor1x140mmfan(optional)
• Dimensions:455x202x440mm(LxWxH)
• Weight:~6kg
2. Package content
• PCcase“Nightfall”
• Screwkit:
Screws for
mainboardmounting
Screws for
PSUmounting
Screws for drive
mounting(3.5"and5.25")
ScrewsforHDDxation
• Accessorykit:
Stand-offsformainboard Washers
Lockattachment(A)and
speaker(B)
A
B
NIGHTFALL U3
4
MountingrailsforHDDs QuickfastenersforODDs
Mountinganglesfor3.5"devices 5.25"bezelwith3.5"opening
Note:
If you are missing any of the items listed above, please contact our customer service
immediately:
suppor[email protected] (Germany and Europe)
suppor[email protected] (international).
NIGHTFALL U3
5
3. The case at a glance
Front view
A– LEDsforpowerandHDDactivity
B– 5.25"drivebays
C– Airinlet,covered:pre-installed120mmLEDfan(blue)
Viewfromabove
A– Fanbracket
B– TopI/Owith:
a–Powerand
b– Resetbutton,
c – 1x headphone and 1x microphone
connector
d– 2xUSB2.0and
e–1xUSB3.0connector
Sideview(closed/left)
A– Bracketsfortwo120mmfans
a
b
c
A
A
A
B
B
C
d
e
NIGHTFALL U3
6
Sideview(opened/left)
A– Drivebaysfor5.25"devices
B– Mainboardmountingpanelwith:
a–Installation opening for CPU
coolers and
b– Cablemanagementsystem
C– HDDcage(screwedin)
Backsideview
A– OpeningforI/Oshield
B– Fanbracket
C– Slotbezels
D – Openings for water cooling
E– PSUbracket
F– Thumbscrews
Bottomview
A – Case feet
B– AirintakeforPSU
Note:
For more information on how to install the intended devices, refer to their respective do-
cuments.
a
b
A
A
B
B
C
C
D
E
F
F
F
F
A A
AA
B
NIGHTFALL U3
7
4. Installation of a mainboard
1.Openthecasebylooseningthethumbscrewsonthecase’sbacksideandremovingtheleft
sidepanel.Laydownthecasesidewiseonanevensurface.
2.The mainboard’s mounting panel inside the case provides various drillings to x the
stand-offs(g.1).
 g.1
Themainboardcontainsspecialscrewopenings(g.2).
g.2
Place the mainboard to the mounting panel. A stand-off must be screwed into every
drillingofthemountingpanelvisiblethroughthemainboard’sscrewopenings.
NIGHTFALL U3
8
3.Remove the mainboard and screw the stand-offs into the respective drillings of the
mountingpanel(g.3).
(Stand-offs)
g.3
4.PresstheI/Oshield(deliveredwiththemainboard)intotheI/Oshieldopeninginthecase’s
backside.
5.Placethemainboardbackontothestand-offsandscrewthemainboardtothem(g.4).
(Screwsformainboardmounting)
g.4
NIGHTFALL U3
9
6.Plugtheconnectorsofthecase’sfrontbezeltotherespectiveconnectorsofthemainboard
(alsorefertoyourmainboard’smanualforfurtherinformation).
5. Installation of a PSU
1.SetupthecaseinfrontofyouandputthePSUfromtheinsideagainstthePSUbracketon
thecase’sbackside(g.5).
g.5
2.ScrewthePSUtothecasefromtheoutside(g.6).
(ScrewsforPSUmounting)
g.6
NIGHTFALL U3
10
6. Installation of a HDD
1.AttachthemountingrailstotheHDDfrombothsides(g.7).
(MountingrailsforHDDs)
g.7
2.Slide the HDD with attached mounting rails into the case’s HDD cage until they lock
(g.8).
g.8
3.ConnecttheHDDtothepowersupplyandthemainboard.
NIGHTFALL U3
11
Notes:
A maximum of five 3.5" HDDs may be installed into the HDD cage. Further HDDs may be
installed to the mounting bays for 5.25" drives at the case’s front using e.g. the SHARKOON
Vibe-Fixer mounting frames.
If you intend to transport the case we recommend to securing (additionally) the installed
HDDs (fig. 9):
(ScrewsforHDDxation)
g.9
7. Installation of an optical device
1.Takeawaytherightsidepanelfromthecase.
2.Removethecase’sfrontpanelbygentlydraggingittowardsyou(g.10).
g.10
NIGHTFALL U3
12
g.11g.12
(Carefullytakeoutanoptionallypresentmetalbezelcoveringthe3.5"drivebaybyusinga
gripper.)
4.Slidetheopticaldriveintothecase’sdrivebay(g.13).
g.13
5.Attachtheopticaldevicefrombothsidesusingthequickfasteners(g.14).
g.14 (Screwsfor5.25"drivemounting)
3.Dismantlethe5.25"frontbezelfromthemountingbayinwhichyouintendtoinstallthe
drivebylooseningitsscrewsandpushingthebezeltotheinside(g.11).Removethequick
fasteners(g.12).
Note:
If you intend to transport the case we recommend
securing (additionally) the installed drives:
6.Connecttheopticaldrivetothepowersupplyandthemainboard.(Putthefrontbezelback
ontothecase.)
NIGHTFALL U3
13
8. Installation of a 3.5" device
(1.Removethecase’sfrontpanelbygentlydraggingittowardsyou.)
2.Dismantlethe5.25"frontbezelfromthemountingbayinwhichyouintendtoinstallthe
drivebylooseningitsscrewsandpushingthebezeltotheinside(g.15).Removethequick
fasteners(g.16).
g.15g.16
(Carefully take out an optionally present metal bezel covering the drive bay by using a
gripper.)
3.Screwthemountinganglestothe3.5"devicefrombothsides(g.17).
g.17
4.Slidethe3.5"devicewithattachedmountingrailsintothecase’sdrivebay(g.18)and
screwittothedrivebayfrombothsides(g.19).
g.18g.19
NIGHTFALL U3
14
5.Connectthe3.5"devicetothepowersupplyandthemainboard.
6.Screwthe5.25"bezelwith3.5"openingintothefrontpanel(g.20)andplaceitbackonto
the case.
(5.25"bezelwith3.5"opening)
g.20
9. Installation of an add-on card
1.Removetheslotbezel’sxationscrewandtakeawaytheslotbezel(g.21).
g.21
NIGHTFALL U3
15
2.Insert the add-on card into the mainboard’s respective slot and x it to the case by
re-attachingthexationscrew(g.22).
g.22
10. The pre-installed fan
1.Thepre-installed120mmfrontfanprovidesa4-pinPSUconnectoranda3-pinmainboard
plug.
2.ConnectoneofbothplugstoeithertherespectivePSUor(tocontrolthefanspeedviathe
mainboard)thematchingmainboardconnector.
11. Installation of additional fans / optimized airflow
1.Placethefanagainsttherespectivebracketfromtheinside(e.g.inthetoppanel/g.23).
g.23
NIGHTFALL U3
16
Fig.24
Note:
The Nightfall case offers a lot of possibilities to install fans.
While installing fans make sure that (cool) air is taken in on the case’s front side/bottom
and blown out on its back side/top. The PC components with the highest heat development
should be placed directly within the airflow.
2.Screwthefantotheattachmentfromtheoutside(g.24).
NIGHTFALL U3
17
Legal disclaimer:
AsacontinuingpolicyofproductimprovementatSHARKOON,thedesignandspecications
aresubjecttochangewithoutpriornotice.Nationalproductspecicationsmayvary.
All rights reserved especially (also in extracts) for translation, reprinting, reproduction by
copyingorothertechnicalmeans.Infringementswillleadtocompensation.
All rights reserved especially in case of assignation of patent or utility patent. Means of
deliveryandtechnicalmodicationsreserved.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components,
whichcanberecycledandreused.
Whenthiscrossed-outwheeledbinsymbolisattachedtoaproduct,itmeanstheproductis
coveredbytheEuropeanDirective2002/96/EC.
Pleasebeinformedabout thelocal separatecollection systemfor electricaland electronic
products.
Pleaseactaccordingtoyourlocalrulesanddonotdisposeofyouroldproductswithyour
normalhouseholdwaste.Thecorrectdisposalofyouroldproductwillhelppreventpotential
negative consequences to the environment and human health.
© SHARKOON Technologies 2012
www.sharkoon.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

Sharkoon Nightfall U3 Specification

Sharkoon
Brand
Sharkoon
Model
Nightfall U3
Category
Computer cases
Type
Specification
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents