Generac 1974-0 Owner's manual

Brand: Generac

Model: 1974-0

Category: High-pressure cleaners

Type: Owner's manual

GEN RAC°I

Portable Products

2 IOOPSI

Owner's Manual/Manual del Propietario

Generac Portable Products isa licensed trademark of Briggs& Stratton Power Products.

Generac Portable Products es una marca registrada llcenciada de Briggs& Stratton Power Products.

Questions? Help is just a moment away!

Preguntas? La ayuda es justa un momento lejos!

Call: Generac Pressure Washer Helpline

Llame:Linea Directa del Lavador a Presi6n de Generac - 1-800-270-1408 M-F 8-5 CT

Web: www.generac-por tables.corn

Model No. 1974-0 (2100 PSIPressureWasher)Manual No. 193729GS Revision0 (09/17/2003)I!!!!!!l!l!!l!

O 8

Generac Portable Products 2100 PSI PressureWasher

TABLE OF CONTENTS

SafetyRules.................................... 2-4

KnowYour PressureWasher ........................ 5

Assembly ...................................... 6-7

Opera, on .................................... 8-10

Product Specific_Jons ............................ I I

Maintenance ................................. I I-13

Storage ........................................ 14

Troubleshooting ................................. 15

Replacement Par_s ............................ 16-17

Warranty ................................. last P_e

EQUIPMENT

DESCRIPTION

_Read this manual carefully and become familiar

with your pressure vrasher. Know its

applicadons, its limitations and any hazards

involved.

Every effort has been made to ensure _at fnforma_-Jon in

this manual Ts accurate and current, However, we reserve

the right to change, al_r or otherwise improve the product

and thisdocument at any time wfthout priorno_ce.

!n _he S_e 0f c_iifum!a_spa#(_r_ster is_qU!_d bylaw

(SeC_i°n _42 0f_e C_lTf°mi_ Pub!!€ ReS0U_es Cede)i I

Ot_er S_tes m_ have Sfmflar I_S i Fede_l laws apply On

fed,_l I_nds I_yO_ e_ip _he m_me_ _idl _ _p,r k arres_r,

!tmUSt:be m_in_!_ed fn effect!ve w_c_r_rig

SAFETY RULES

j_IL Thls is the safeL_ alert symbol. It is used to

alert you to potential personal injury hazards.

Obey all safeL_ messages that follow this

symbol to avoid possible injury or death.

The safety alert symbol (_I,) is used with a signalword

(DANGER, CAUTION,WARNING), a pictorial and/or a

safety message to alert you to h_=z_rds,DANGER indicates

a hazard which, ff not avoided, w_ffresult fn death or serious

injury, WARNING fndfcates a h_z_rd which, if not avoided,

couldresult in deathor serious fniury. CAUTION

indicates a hazard which, ff not avoided, might result fn

minor or moderate injury. CAUTION, when used

without the aler_csymbol, indicates a situation that could

result in equipment damage. Follow safety messzses to

avoid or reduce the risk of fniury or de_th.

WARNING

The engine exhaust from this product €ontalns

chemicals known to the State of California to cause

cancer, birth defects, or other reproductive harm,

Hazard Symbols and Meanings

Toxic Fumes ElecCric&l Shock

SlipperySurface F_II Fluid In[ecCion

Fire Explos(on HoC Surface

rVlovingParts FlyingObjects Kickback

Generac Portable Produc_ 2100 PSIPressureW_sher

DANGER

, _ep Spraynozzle b_een 8 co 24 inchesawayfrom Cleaning

, Operate thi_,unit on _ stablesuriname

, The gleaning areashOUldhaveadequateslopes _ncldrainage tO

_dOCOtheP_sib!l!__ af_ll

,Be _mely eareful ify0u mUStUSethepmsSU_ _her from

aladder,scaffoldingor any ocher relatively unstablelocation

, _f_!Yg_Psp_ gun_f_hb_hh_ _h_n_Sin_

WARN ING

WHEN ADDING FUEL

,Turn presSU_ _her OFF_ndIctic _! at !east2 minutes

bdo__m0v!n__ _p

' F(IIfuel_nk OUtdoOrsL

,DO NO! overfilltank_AI!0w sP_-Cefor

'_eP fuel aY_ayfrom spa_€ open/lames, pi!_ I!ghts¢h_ r. and

,DO NOT dp engine 0r eClUiprnen__.tangleWhich eaUsesfuel

, DO NOT Sprayflammabl_ liquids

WHEN TRANSPORTING OR REPAIRI NG EQU!PMEN'I"

' Transpordrepalrwithfueltank E'VlPTYOr with fuel shutoff

WHEN STORING FUEL OR EQUIPMENT W!TH FUEL

IN TANK

' StOreawayfrom fureaces,stoves_w_cerh_terS_ dothes

dryers 0r otherappl!ancesthat havepilot !(ght_or 0the_

ignition SOUrc_bet_.Us_thc_ycanignite fuel VapOrs

WARN ING

Generac Portable Products 2100 PSI PressureWasher

CAUTION

, DO NO'r s_Um Sp_ gun !n open p_!cion.

,0o NOTlea,_S_raygU"U"_"d_d Wh!lem_h!,e

,NEVER USea sP_ gun which does not have a cr(_er lock or

, A!W_ys be certain spray gun, no_!es and _C_eSsories

CAUTION

, !i_yoU havequascions ab0uc intended u_ei ask d_!er or

c0n_ Biffs & Str_tton powe_ produc_.

,NEVER operate units _Ch broken Or missing p_rt_; or

_^dch_c prot_ve h0using0r covers.

, DO NOT by_ass _.nyS&fe_ deviceon this machine_

, Before _r_ing pressur_ w_-sher in co!d We_Jher. check a!l

par_ of _e equipment to be surc (co has not formed _h_re

, NEVER- move machine by pul!ing on high pressu_ hOSe.

handl_ prev(d_d on unit.

, Chccl¢fuelsystem for le_ksor SignsOf deteriorationL Such as

Chafed or sp0n_)" hos_i !o_e or missing clamps, 0r d_.m_ed

tank or cap. C0r reccal! d_eccs b_ore Operating PmSSU_

,'-his equipment (_ designed to be USedWith Bri_S & Strat:on

Power Productt. author!zeal p_rts ONLY, If equ!pmenl: it. used

_Ch P"r_s th_ DO N_ c0mP_ _i_h minimum spcc!fieati0ns

m_m

Generec Por_ble Produc_s2100 PSIPressureW_sher

KNOWYOUR PRESSURE WASH ER

Read (;his owner's manual and safeL-_frules before operating your pressure washer.

Compare the Tllus_retTonswith your pressure wr_sher to famTITr_rTzeyourself wTth the IocatTons of vr_rious controls r_nd

r_djustme_ts.Sr_vethTsmr_nualfor future reference.

High Pressure Hose

Air Cle_r_er .............

PrTmer Bulb

........... High _ressure O_tlet .......

& W_er Inlet

Pump eq_!pped with

A_om_ti¢ Cool DOWn

FuelTa_k

A!r C!eaner _ Dry ?/pe fTIter elemen: limits the am0unt H!gh P_ssure Oudet _ C_nnec:!0n _r high pressure

Of dirt _r_d d_JStthat gets in hos_i

Automatic C00! Down System _ Cycles Data Tag {no€ shown, near rear _f base P!aCe)

_hrough pump When _er reaches 125%1_5_E Warm Pro¥ides model _nd serial n_mber of pressure _sher.

W_ter wili rJischar from ump onto have _hese readily zv_il_ble iF Czl]i_g for assis_cei

system Prevents nternal Pump damage, Primer Bulb Prepares a _oId engine for s_rtingi

Chemlcal Iniectlon Siphon/Filter _ Use _o sipho_

p_SSu_ Rec0!! starter Used for S_ng the e_gine m_n_ally,

Spray Gun _ Cor_trols the applic_Jo_ of water onto

Fue Tank _ F

clea_|_g s_r_r_cewll:h tr_er devlce_ I_cl_des sr_tetylatch.

High PressUre Hose Connec_ 0r_e end :o w,'_ter

pump _cl the O_her e_d _ sprey gUn, water !n!e_ €OnneC:!_n fo_ g_rd_n hose,

Generac Portable Products 2100 PSI PressureWasher

ASSEMBLY

IMPORTANT: Read entire owner's manual before you

attempt to assemble or operate your new pressure washer.

Remove Pressure Washer From

Carton

I, Remove the parts bag,accessories, and inserts included

with pressure washer.

2, Slice t_vo corners at the end of c_rton from top to

botr;om so the panel can be folded down flat,

3, Remove pressure washer from carl;ore

Carton Contents

Items in the carton include:

Main Unit

Handle

High Pressure Hose

Spray Gun

Nozzle Extension

Safety Goggles

Oil Bottle

Parts Bag (which includes the following):

Owner's Manual

Engine Manual

Owner's Registration Card

Handle Attachment Hardware

PREPARING PRESSURE

WASHER FOR USE

If you have any problems with the assembly of your

pressure washer or if parts are missing or damaged, call the

pressure washer helplfne at 1-800-270-1408. If calling for

assistance, please have the model, revision, and serial

number from the data tag available.

To prepare your pressure washer for operation, you

will need to perform these tasks:

I. Fillout and send in registration card.

2. Attach handle to main unit.

3. Add oil to engine crankcase.

4. Add fuel to fuel tank.

5. Connect high pressure hose to spray gun and pump.

6, Connect water supply to pump,

7. Attach nozzle extension to spray gun.

Attach Handle

I. Place handle assembly onto handle supports connected

to main unit, Make sure holes in handle align with

holes on handle supports (Figure I).

Alig

Handle

Supports

NOTE: It may be necessary to move the handle supports

from side to side in order to align the handle so it will slide

over the handle supports.

2. Insert carriage bolts through holes from outside of

unit and aI;t'.acha plastic knob from inside of unit

(Figure 2).Tighten by hand.

Insert one "L" hooks through hole just under billboard

on lefl;side of handle (viewing from rear of unit). Hold

hook fn place with pliers and attach Iocknut with

7/16" wrench (Figure 3),

;prayGun

Hook

Insert other"L" hook through hole iust above

billboard on right side of handle (viewing from rear of

unit). Hold hook fn place with pliers and at_ch Iocknut

with 7/16" wrench (Figure 3),

Generac Portable Produc_s2100 PSIPressureWasher

Add Engine Oil and Fuel

• Place pressure washer on a level surface.

CAUTION

Before connecting garden hose to wa:er inlet, fnspect

inlet screen (Ffgure 6), Cle_n screen ff i: cont_fns

debrTsor have Tt replaced if damaged. Refer to the

sectTon "O-Ring MaTetenance" Tfinlet screen Ts

damagud, DO NOT RUN PRESSLJREWASHER IF

INLET SCREEN IS DAMAGED.

• Refer to engTneowner's manual and follow oil and fuel

recommendatTons and instructTons,

NOTE: Check oTIoften durTng engTnebre_k4n, Refer to

engine owner's manual for recommendations,

Connect Hose and Water Supply to

Pump

IMPORTANT: To avoid pump damage, you must _ssemble

_he nozzle extension to the spray gun and attach all hoses

before you s_r% the engine,

I, Uncoil high pressure hose and att._ch one end of hose

to base of spray gun (Figure 4),Tighten by hand,

NOTE: Remove and discard all pump shipping caps before

at_ching hoses,

2, Attach other end of high pressure hose to high

pressure outlet on pump (Figure 5),Tighten by hand,

_t, Run wa_er _hrough your garden hose for 30 seconds

to clean out any debris,

IMPORTANT: DO NOT siphon standing wa_er for the

wa_er supply, Use ONLY cold water (less than 100:F),

S, Connect _he garden hose (not to exceed S0 feet in

length) to the water inlet_Tighten by hand (Figure 6),

CAUTION

6, Turn ON the wa_er and squeeze the trigger on the

gun to purge the pump system of air and impurities,

GeneracPortableProducts2100PSIPressureWasher

CH ECKLIST BEFORE

STARTING ENGINE

Review t:he unft:'sassembly to ensure you have pert'ormed

all of t:he following.

I, Make sure handle is fn place and secure,

2, Check that oil has been added to proper level fn the

engine cran k_se,

3, Add proper gasoline to fuel tank,

4, Check for properly t:fghtened hose connect:ions,

5, Check to make sure :here are no kfn_, cuts, or

damzge to high pressure hose,

6. Provide a proper wa_er supply at an adequate flow.

7, Be sure to read "S_fe_ Rules" and "HowTo UseYour

PressureWasher" before using pressure washer.

HOWTO USE YOUR

PRESSURE WASH ER

If you have any problems operating your pressure washer,

please call t:he pressure washer helplfne at:

1-800-270-1408.

How to StartYour Pressure Washer

To s_rt your pressure washer forthe first: time, follow

these fnatruc_ions st:ep-by-s_ep.Thfsstar_fng information

also applies if you have let the pressure washer sit idle for

at least a day.

Place pressure washer near an outside wa_er source

c_pable of supplying water at:a flow rate great:er t:han

3.0 gullons per minute and no lesst:han 20 PSI at:

pressure washer end of garden hose.

Check that high pressure hose is tightly connect:ed t:o

spray gun and pump. See "Preparing Pressure Washer

for Use" for illustrations.

3. rvlakesure unit is in a level position.

4. Connect: garden hose to water inlet: on pressure

washer pump. Turn ON water.

CAUTION

5. At_ch adius_ble nozzle extension to sprm/gun

(Figure 7).Tighten by hand.

Position nozzle in low pressure mode (see "How t:o

Use t:heAdjustable Nozzle") and squeeze t:rf_er on

spraygun t:orelieveairpressurec_used by turningON

wa_enWat:er will flow out of spray gun in a thin

stream. Continue to hold trigger until :here is a steady

stream of wat:er and no air remains in system.This will

make it easier t:o pull s_r_ engine. Release t:ri_er.

7, E%=zgusafetylatchto spraygunt:rf_er (Figure8).

Szfe y tch

Start engine according to fnst:ruci;fons given in engine

owner's manual,

NOTE: If :he recoil star_er is hard to pull, squeeze the

spray gun t:rfgger to relieve int:ernalpump pressure,

NOTE: Always keep the throttle lever in the "Fast"

position when operating the pressure washer.

Generec Portable Products 2100 PSIPressureW_sher

How to StopYour Pressure Washer

I. Let engfne idle for _vo mfnutes.

2. "l'urn engine off accordfng to instructfons gfven in

engine owner's m;_nual,

3, Squeeze trigger on the spray gun to relieve

pressure in the hose.

NOTE: A small _mount of w_r will squirt out when you

release the pressure.

How to Use the Adjustable Nozzle

You should now know how to START _nd STOP your

pressure w_sher.The fnform_tJon in thfs sec_Jon will tell

you how to adiust the spray pa_rn and to _pply detergent

or ol:her cleaning chemicals.

CAUTION

I, Slide nozzle forward when you wish to _djust spray to

low pressure mode (Figure 9), Slide nozzle b_ckw_rd

:o _chieve high pressure,

Slide nozzle b_ckw_rd

for Hfgh Pressure

Mode

Slfde nozzle forward for low

pressure mode and

detergent applicatfon

2. Pointnozzle down towardsa fTrmsurface _nd press

triggerto _est p_t_ern (Figure I0),

3. Twfstfng nozzle_djus_ spray p_ern from a n_rrow

p_t_ernto _ fan pattern (FigureI I).

Rotate nozzle

counterclockwfse forfan

spray pattern

Rotatenozzle clodcwfse

for narrow spraypattern

For most effective cleaning, le_epspray nozzle from

8 to 24 fnches _w_y from cleaning suff_ce,

If you get spray nozzle _oo close, especfally usfnghfgh

pressure mode, you may d_mage surface befng cleaned,

DO NOT get closer than 6 inches when cleaning tfres,

GeneracPortableProducts2100PSIPressureWasher

Applying Detergent with the

Adiustable Nozzle

IMPORTANT: Use soaps designed specifically for

pressure washers. Household detergents could damage

the pump.

CAUTION

To apply detergent, follow these steps:

I, Revfewuseof adjus=ble nozzles,

Prepare detergent solution as required by iob.

Place filter end of chemical injection hose into

detergent confiner.

CAUTION

4. Slfde adiustable nozzle forward to low pressure mode.

Detergent cannot be applied with nozzle in hfgh

pressure posi_iom

5. Make sure g_rden hose is connected to water fnlet.

Check that high pressure hose fs connected to spray

gumand pump. Start engfne.

6. Apply detergent to a dry su_ace, starting at lower

portion of area to be washed and work upward, using

long, even, overlapping strokes.

7. Allow detergent to "soak fn" for 3-5 mfnutes before

washing and rinsfng. Re_pply as needed to prevent

surface from dryfng, DO NOT allow detergent to dry

on (prevents streaking),

IMPORTANT: You must flush the chemf_l fniec_ion

system after each use by placing the filter fnto a bucket of

clean water, then rum the pressure washer fn low pressure

for I-2 minutes.

Pressure Washer Rinsing

For Rinsing=

I. Slide the nozzle backward to high pressure, press the

trigger and wait for the detergent to clear,

NOTE:You c_n also stop detergent from flowfng by simply

removfng chemfcal injection hose from bottle.

2. Keep the spray gun a safe dis_nce from the area you

plan to spray.

3. Apply a high pressure spray to a small are_, then check

the surface for damzge. If no damzge is found, it is okay

to contfnue cleanfng.

,Keep Spraynozzle between8 to 2,4inches &wayfrom Cleaning

surf'aC_

, Be extremely _reful ({ FoumUSt Use_e pr_SSU_washer{rein

ladder.Scaffoid(ngOr a_ Other relatJveiyunscabieiocadeni

' Firmly grasp SP_ gun v_thboth handsw_en us!nghigh

4. Start at the top of the area to be rinsed, working

down wfth same overlappfng strokes as you used for

washfngand applyfng detergent.

Automatic Cool Down System

('l-hernnal Relief)

If you rum the engine on your pressure washer for

3-5 minu_es without pressing the trigger on the spray gun,

circulating wa_er in the pump c_n re_ch temperatures

above 125°EThe system engzges to cool the pump by

discharging the warm water onto the ground.

mm_m

Generec Portable Products 2100 PSIPressureW_sher

SPECIFICATIONS

Outlet Pressure ..... 2100 psT

Flow Rate .......... 2,0 g_llons per minute (gpm)

De_rgent .......... Use detergent approved for

pressure washers

Wa_r Supply ...... Not to Exceed 100°F

Temperature

Automatic Cool .... Will cycle when w_ter

Down System re_ches 125°=155°F

ShippingWelght .... 54 Ibs.

GENERAL MAINTENANCE

RECOMMENDATIONS

The pressure washer warrr_nL7 does not cover items that

have been subiec_ed to operator abuse or negligence.To

receive full wlue from the w_rrenty, the operator must

mr_in_in the pressure washer _ instructed in this manual.

• Some _dlustments will need _o be m_de periodically to

properly main_in your pressure w_sher.

• All maintenance in _his manu_l and _he engine owner's

m_nual should be made at least once e_ch season.

• Once a year you should clean or replace the sparl< plug,

clean or replace _he _ir filter and checl<the spray gun

_nd _djus_ble nozzle extension _ssembly for wear.A

new sparl< plug and clean air filter _ssure proper fuel-_ir

mixture and help your engine run be_er and I_st longer.

Please refer _o your engine owner's m_nu_l for more

devils.

• If equipped with inflatable tires, keep the air pressure _t

_he v_lue m_rl(_d on _he _ire or within 15 _nd 40 psi.

Before Each Use

I. Check engine oil level.

2. Check water inlet screen for damage.

3, Check in-line filter for d_mage.

"t. Check high pressure hose for leal<s.

5. Check chemical injection hose and fll_er for damage.

6. Check spray gun and _djus_ble nozzle extension

zssembly for le_ks.

7. Rinse out g_rden hose _o flush out debris.

PRESSURE WASH ER

MAINTENANCE

Check and Clean Inlet Screen

Exr_mine1:hescreen on the water inlet. Cler_n it if the

screen is clogged or replace it it"screen is dr_maged.

Check Hish Pressure Hose

The high pressure hose can develop le_ks from wear,

kinl<ing, or _buse. Inspect the hose each _ime before using

it. Check for cuts, leal<s,_br_sions or bulging of cover,

d_mage or movement of couplings. If any of _hese

conditions exist, replace _he hose immediately.

Check Chemical Iniection Hose

Exr_mine1:hef_l_er on the detergent tube r_ndcle_n if

clogged.The tube should fit tightly on the b_rbed fitting.

Exr_mine1:hetube for leal<sor refers. Replace the filter or

_ube if either is d_maged.

Check Gun and Adjustable Nozzle

Extension

Exr_mine1:hehose connection to the spray gun and mr_ke

sure it is secure.Test 1:hetrigger by pressing it r_ndmr_l<ing

sure it "springs b_ck" into pl_ce when you release it. Put

1:hesafety latch in the ON position and test the trigger.You

should not be _ble _o press the trigger.

Generac Portable Products 2100 PSI PressureWasher

Purge Pump of Air and

Contaminants

To remove air from the pump, follow these s_ps:

I, Set up pressure washer as descrfbed fn _Preparfng

Pressure Washer For Use", Connect wa:er supply and

_rn w_:er on,

2, Pull trfgger on spray gun and hold.

3, When w_ter supply is steady and constant, engage

safety la:ch.

To remove €on_rnlnants from the pump, follow

these steps:

I, Set up pressure washer as descrfbed fn _Preparfng

PressureWasher For Use". Connect water supply and

_rn w_:er on,

2, Remove nozzle ex_ensfen from spray gun.

3, Star_ engine according to fnstructfens in "Flow To Use

Your Pressure Washer".

4, Squeeze :rigger on spray gun and hold,

5, When w_ter supply is steady and constant, engage

safety latch and refasten nozzle extension,

Check In-Line Filter

Refer to Ffgure 12 and service the in-line filter if ft

becomes clogged, as follows:

Nozzle E_ension

O-rin

I. Detach spr_ gun and nozzle ex!;ension from high

pressure hose. De_ch nozzle extension from spray

gun and remove o-rfng and screen from nozzle

ex_ensfon, Flush screen, spray gun, and adjustable

nozzle extensfon wfth clean water to clear debris,

2. Place in-line filter screen fnto threaded end of nozzle

ex_ensfon, Directfon does not matter, Push screen fn

with eraser end of pencil until ft rests 11atat bottom of

openfng.Tale_=_re not to bend the screen,

Place o-rfng fnto recess, Push o-rfng snuglyagainst fn.

line filter screen.

Assemble nozzle extension to spray gun, as descrfbed

earlier in manual,

O-Ring Maintenance

Purchase an C_Rfng/Mafntenance Kit, part number

191922GS by contacting the nearest authorized servfce

center. It fs no: included with the pressure wzsher,Thfs kft

includes replacement o-rfngs, rubber washer and water

inlet filter. Refer to the fnstructfon sheet provfded in the kft

:o service your unit's o-rings,

Cleaning Chemical Injection Hose

If you used :he chemi_l fniectfon hose, you must flush ft

wi:h cle_n water before stopping :he engine.

I. Place chemi_l fniection hose fn a bucket full of clean

water,

2. Slide adjustable nozzle forward to low pressure

position, Flush for I-2 mfnutes,

3. Shut off engine.

IMPORTANT: Simply shutting OFF engine will not

release pressure fn :he system,When the engine has

shut down, squeeze the trigger on the spray gun to

relieve the pressure in the hose.

Generec Portable Produc:s 2100 PSIPressureW_sher

Pump Maintenance

Changing Pump Oil

Change oil every S0 hours or once yearly, whichever

occurs fTrst,

NOTE: Purchase _ preme_sured bo_le of pump oil, i_m

number 190586GS, by contacting the nearest authorized

service center.

Change pump oll as follows:

I, Drain engine oil and fuel from pressure washer,

2, Use • 8ram allen wrench to remove bbck pump oil

c_p be_en high pressure outlet and g_rden hose

inlet (Figure 13).

3. Tilt pressure wzsher _o drain oil into an _pproYed

container until it drips slowly from pump.

4. Tilt pressure wzsher in opposfte direction _nd empty

premeasured pump oil bo%le fnto s_me openfng (_

sm_ll funnel may be helpful).

S. Install bbck pump oil cap and tfghten firmly.

6. Set pressure wzsher in upright position.Add fuel _nd

engine oil.

ENGINE MAINTENANCE

See _he engine owner's m_nual for instructions on how to

properly maintain _he engine.

m] [_I_mljm_Eell

KEEP OUT OF REACH OF CHILDREN, DON'T

POLLUTE. CONSERVE RESOURCES. RETURN

USED OIL TO COLLECTION CENTERS,

Generac Portable Products 2100 PSI PressureWasher

PREPARING THE UNIT

FOR STORAGE

Water should not remafn in the unft for long perfods of

time, Sedfments or minerals can deposit on pump parts and

==freeze" pump action. If you do not plan to use the

pressure washer for more than 30 days,follow this

procedure:

I. Flush chemical fniectfon hose by placing filter fnto a pall

of clean water whfle running pressure washer fn low

pressure mode (adiustable nozzle fn forward positron),

Flush for one to two mfnutes,

2. Shut off engine and let ft cool, then remove high

pressure and garden hoses, Disconnect spark plug wire

from spark plug,

3. Empty/pump of all pumped liquids by pullfng recoil

handle about 6 times,Thfs should remove most liquid

in pump,

4, Use PumpS_ver to prevent corrosion bufld up and

freezfng of pump.

5. Store unft in a clean, dry area.

Protectin 8 the Pump

To pro_ect the pump from damage caused by mfneral

deposfts or freezing, use PumpSwer to treat pump, Thfs

prevents freeze damage and lubricates pfstons and seals.

NOTE: PumpSaver is available as an optfonal accessory, It

is not included with the pressure washer. Conts_ tile

nearest audlorfzed service center to purchase PumpSwer,

CAUTION

! A!w_ wear c_e protectionwhen usingPurnpS_cer.

To use PumpSayer, make sure the pressure washer is

turned off and disconnected from supply water. Read and

follow all instructfons and warnings given on the PumpSaver

container.

NOTE: PumpSaver will drip from pump after treatment

and wfll s_in wood and concrete,

NOTE: If PumpS_ver fs not avaflable, draw RV antffreeze

(non-alcohol) into the pump by pouring the solutfon fnto a

3-foot sectfon of garden hose connected to fnlet adapter

and pullfng recoil handle wcfce,

STORING THE ENGINE

Seethe engineowner's manualfor instructions on how to

properlyprepare the engine for storage,

Generac Por_ble Produc_s2100 PSIPressureW_sher

TROUBLESHOOTING

Problem Cause Correction

I ; NOZZ!e Tn!ow pt_ssut_ mode, I; _!l nozzle b_ckwar_ for high

2i W_er inle_ is block_di 2i Clear inlet,

3; I_adequ_te _ter supply, 3; Provide _de_u_e w_er fl0w,

faJ!ure t0 p_dUce pressure; _i C[e_ed !_let h0Se s_rziner, _i Gh_k znd €!e_n !_let _0Se

erratic pressure, chat_r!ns; !oss s=rainer,

°_Pre_ureil°w_'_ _°lum_i I _ w_ _!_ i__v_I_. I _i _vi_ _0_ _

7i HighpressU_h0Seisb!o¢_d0_

9i Nozzle iS ObS:ruc=edi

IO_ Purnp is _ulty,

I i De_er_t Siphoning _be is _ot lil_se_de=erge_tSiphoningtube

s_bmergedi i i_to cle_rg_ti

; 2 C_emic_lfflterisclo edor 2 Cleanorr_ I_Cefil_ertde_rve_t

Oei;ergen/: finis to m_x wH;h spray÷ _ P .o

Cr_Ckedi SiPh0ning t_bei

4i Nozzle is in high pressure m0dei 4i P_sh _0zzle forward for IO_

I P_SS_ m0dei

E_g!_e _p_ed i_ ;00 S!0w. H0ve th_l_ €on_l _ FAST

Engine runs good a_ no-!oad but ................................................................ pOSt 0n. !f e_g ne st !! b0gs down .......

..... h nl "i _" " ; " ;

cogs w e

Pressure Washer s_0ps dur!ng F!II fuel _nl_

I I

Generac Portable Produc_ 2100 PSI PressureWasher

EXPLODEDVIEWAND PARTS LIST- MAIN UNIT

900 _ 2

Item Part # Description Item Part # Description

I 192419GS BASE 10 21760GS ORIFICE

2 BI91874GS HANDLE I I 192309GS KIT,Hook

3 I9 Ig09GS BILLBOARD 12 192050GS KIT,E-Rfng

4 190249GS HOSE 13 188792HGS WAND, Adjustable Nozzle

5 192525GS KIT,Pump Mounting Hardware 14 19231IGS KIT,Wheel

6 192128GS KIT,Hook IS 23139GS KEY

7 190132GS GUN 16 191693GS ASSY,Pump (see pa_e 17)

8 B2203GS KIT,Handle Conne_or 900 NSP ENGINE

9 192310GS KIT,Vibration Mount

Items N0(; Illus(;rated:

Part# Descript:i0n

193729GS P1ANUALi

193911GS K!T, De_a!s

BB3061BGS OILi Engf_e

GeneracPortableProducts2100PSIPressureW_sher

EXPLODEDVIEWAND PARTS LIST- PUMP

If._m Part #

19 190571GS

28 190627GS

29 190575GS

30 190576GS

34 190577GS

45 190578GS

46 190629GS

47 190630GS

62 190581GS

68 190582GS

69 190584GS

76 21783GS

Description

CAP, Oil

MANIFOLD

O-RING

SCREW

CONNECTION, Chemical Inlet

VALVE, Se._ PI_, Plastic

VALVE, Se_t, Plastic

CAP

BALL, SS

O-RING

THERMO RELIEF

Item Part #

A NSP

B 190632GS

C 190634GS

E 190591GS

F 190592GS

G 190593GS

H 190628GS

J 189971GS

K 190636GS

Description

ASSY,CASE, PISTON

KIT,WATER INLET, ALUM

KIT, OUTLET,ALUM

KIT,CHECK VALVES

KIT, INLET CHECK

KIT, CHEMICAL INJECTION

KIT, UNLOADER STEM

KIT, CHEMICAL HOSE

KIT, SEAL SET

NOTE: Item letters B - K are service kits and include _11

p_rt_ shown within the box,

I-avador_de Presibn 2100 PSIde Generic Portable Produc_s

TABLA DE CONTENIDOS

Regl_sDe Segurid_d.............

Conozc_ Su Oenerador ...........

Ensamblaie .....................

Funcionamienco .................

Especificaciones DOI Producto ......

_ancenimiento ..................

Almacenamienco .................

Di_nosdcos De AverJ_ ...........

Piezas De Kecsmbio .............

................. 18-20

................... 21

................. 22-23

................. 24-26

................... 27

................. 27-29

................... 29

................... 30

................. 16-17

Gar_nti_ ............................................ 31

DESCRIPCI( N DEL EQUIPO

Lea este rn_,nual de nn_ner_ culd_dos_ y

_ fannili_Hcese con su I_v_dor_ _ presi6n, Conozc_

sususos, sus lirnitaclones y cu_lquler peligro

relaclonado con el misnno,

$e ha hecho c_daesfuerzo posible par_ asegurarseque la

inform_ci6n que apareceen este m_nual esex_c_ y se encuenCra

scCualizad_Sinembargo,noso_ros se reservs el derechos

csmbisr,alcer_ro de oCramanera meiorar, el producCoy esce

documenCo en cuslquiermemento, sin previo arise,

-n el estado de California es obligscorio, seg0n Is Icy,el use de

_pagschispas(Secci6n 4442 del C6digo de RecursosPOblicosde

California). OCros esCadospueden cener leyessimilares.I.asleyes

_ederalesse aplicanen derras federales.Si equips el silencisdor

con un spa_achispa_,escedeber_ ser msncenido en buenas

:ondiciones de crabajo.

REGLAS DE SEGURIDAD

A Este es el sinnbolo de alert_ de seguridad. Sirvep_ra advertir al usu_Ho de un posible riesgo par_

su int_grldad fisic_..Sig_.t_dos los mensajes de

segurldad que figuren despu_s de este simbolo

p_,ra evitar leslones o induso I_,rnuert_.

El sfmbolo de alerta de se_uddsd (_.) es ussdo con uns palsbra

(PELIGRO.ADVEKTENCIA_ PKECAUCI(_N), un mensaie per

escHto o uns iluscracibn, psra slerr_rlo acerca de cualquier

situscibn de peligro que pueda exisdr. PELIGRO indica un Hesgo

el cual, si no se evita, ceuserO Is muerce o una heHda grave.

ADVERTENCIA indies un riesgo el cusl, si no se evit_, puede

csusar la muerCe o uns herids grave. PRECAUCI6N indica un

riesgc_ el cual, s( no se evita, puede csussr heridas menores o

moderadss. PRECAUCI6N, cuando se usa sln el sfmbolo de

slerr._ indica una situscibn que podris r_sultar en el da_o del

equipo. Sigs los mensaies de sc_uddsd par_ evit_r o mducir los

riesgos de her(des e inclusive la muerCe.

ADVERTENCIA

El escape del rnotor de este producto contiene

elernentos qu_rnicos reconoddos en el Esi_do de

Calit_rni_. pot p_odudr c_.ncer,defectos de nacinnlento u

otros d_Bos de tlpo reproductlvo.

Simbolos de Peligro y Signiflcados

G_es T6xicos Descs_a El_cCrica

SuperficiesResbalosss Caer Inyecd6n Liquida

Fuego Explosi6n Superficie Caliente

Parcesen P1ovimienCo Ob(c_osVolsdoms Concragolpe

Lavadorade Presf6n2100 PSIde Generac Portable Products

PELIGRO

ADVERTE NCIA

H_n_eng_i_boqUilla _[er_ciad0 de8a 2A pu/_das de I_ superfide de

!imp!e_

+ OPe_ y ah_acel_ee_ta un!dadsobr_un_ suPe_de e_l_b!ei

_ El _-!'e_d_ l!mp!eT;_deber_ tear in¢!in_¢!0_s y dmnaJes=-decuad_s

para _Jsminuir b.p_$ibilid_ _e _id_Lsdebi_O&S_(pe_i_iesreSbaJosaSi

_e,3e_o,eraadamen_ecuidadO$O siUs&lam_quinalav&do_ ;_FmSi6n

desdeuna esc_Jera,andamIo e _u=-Iquiersuperficie_&Uvamen_e

_ _uje_e !apiS_O!ad_ !&h)d_!&v_dOi_firmera_nte €0n amb_ ni_ui0s

Cuand0U_ili_eel _dad0 a=Jm presi6niD_ es_ m_nei_

Iesi0nes produ¢idaspot el p_sible_olpe de lapis_olaha¢i_

ADVERTENCIA

C UAN DO Ai_IADA COM BU$'I'i B LE

_ AP_Ue el gene!_ad0r(posici_n OFF) Yd6jelo er_d_ a!menospot

_ I-lene el _tnque _1_il_ [i_rei

NO lien8 demasiad_ el _nque, Perm_ _1 men0s esp_i0 p_P_ I_

exp_mS!_nde! _0mbusub!e+

_ IH_n_engaI_@s01!na=_!ejad_dechisp_si !l_niasabie_, pil_s_ _ler y

CUANDO OPERE EL EQU!PO

NO incJineel motor oel equipo;decal i_e_ que la @selina se

_ NO _cie llquides inllamables.

CUANDOTRANSPORTE O REPARE EL E_UIPO

Transper_e 0 rep_re elequipo con el t_r_ue de combustible_adei O

c#n !a_'_!Wd&I_ra a_r e! Combustible_da (posi_i6n

CUANDO ALMACENE O GUARDE EL EQUlPO CON

COMBUSTIBLE EN EL TANQUE

A!m_cene_leJ_dod_ _alder_, es_ufasi_aler_de_s de _U a+_ec_do_

de _pa u _$ ap_ra_os_lecu_d0m6sOcos que p_sea!!pIIO_oSU

O_r_S Eient_sde igr,ici_n; _rque el!os pueden _iCender los"_a_r_S

iiiADVERTENiCIAiiiiiiiiiiiiiiiiiiiiiii

I-avador_de Presibn 2100 PSIde Generic Por_ble Products

ADVERTENCIA PRECAUCION

NO _asegUreI_pE_I_ de _¢i_do en la p0sK,i_n (open = abierto)i

_ NO _dobe la pi_tol_,d_ rociadO Outdo la i_,_quinaOS_

_ NUN CA uti!ice ur_ pistO!ade _¢iadO que no teng_ _m segu_

_ti!lo 0 pror.ecci6nparagatJl!o_n su !u_r _"en _uen_s_di¢i0nesi

_ Sien_preaseg_se dequ_ lapis_l_ de _iadOib_uil!as y _cCesorio$

PRECAUCION

ADVERTENCIA

PRECAUCION

_ Si Usted tiene _.Ig_Hiapr'egUii__cer_a de ]aSfin_!idBdesde U_del

_l_eP_ldor_ pregl_rlt_.Je• _U _on_e_iOl1:_rio o conir_tct.e ;_Brig, s

_r_Oil Power' Pr_ductsL

_ NUN_ debe_ SetO_S I_ un!d_descon pae_s r_s

_ NO elud_ ning6n disposiuv0 de S_rid:td de es._ m;_quin_.

An_s de porter en r_rcb_, la r_tqUiba I_'_0ra _.pr_Si6n en €lima

fr{0i _ise _S I_ pa_S de I equipo y asegor'esede que 1!0 se ha_

NUN_ rnueva la mgquina halando larnm_guei'_ de al_ presi6n.

Revise que el siscema de combustible i_opresente Iugas o signos de

det_ri_, como _ngue!_s des_d_ 0 PO!_SaSi_je_doreS flOJOS

ausen_esi tapao _nque dafiac]OS.CO _iia _os lOSde{ectosabt_s

de opera_ la m_quina lavador& _ presibn.

El equlpo de _J_ presi_13 es_ dise_do p_ra se_ udli:_ado

UN!CAHENTE _O_ Ins parses aucori_das Br]_ & Stra_on Power

Pr_U¢_i Si Utili_ eS_ equipo t;0n p_rteS qUe n0 bUrlipl_l_ _l_ I:i_

_pe¢_i¢_¢!0!les m!bimasi el Usu_r!0 _!me _0s !Os

Page is loading ...

Generac 1974-0 Owner's manual

Brand: Generac

Model: 1974-0

Category: High-pressure cleaners

Type: Owner's manual

Download PDF

report

in other languages

español: Generac 1974-0 El manual del propietario

Generac 1974-0 Owner's manual

Generac 1974-0 Owner's manual

in other languages

Related papers

Other documents