Samsung MM-J430D User manual

Samsung
Brand
Samsung
Model
MM-J430D
Category
Home cinema systems
Type
User manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
DVD MICRO
COMPONENT
SYSTEM
user manual
MM-J430D
MM-J430D-SG-ENG-0708.indd 1 2016/2/4 15:19:49
|
2 English
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock
or personal injury.
CAUTION: TO PREVENT
ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
This symbol indicates important
instructions accompanying the
product.
WARNING
• To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device
and shall stay readily operable at any time.
• This apparatus shall always be connected
to an AC outlet with a protective grounding
connection.
• To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily
operable.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
WARNING
• TO PREVENT THE SPREAD
OF FIRE, KEEP CANDLES AND
OTHER ITEMS WITH OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.
MM-J430D-SG-ENG-0708.indd 2 2016/2/4 15:19:50
English 3
|
Precautions
• Ensure that the AC power in your house
matches the requirements listed on the
identification sticker located on the back of your
product.
• Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (3 - 4 inches/7.5 - 10 cm).
• Do not place the product on amplifiers or other
equipment which may become hot. Make sure
the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc tray
is empty.
• To turn off the product completely, disconnect
the AC plug from the wall outlet. Disconnect the
AC plug from the wall outlet if you will be leaving
the device unused for a long period of time.
• During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due to
lightning could damage the product.
• Do not expose the product to direct sunlight
or other heat sources. This could cause the
product to overheat and malfunction.
• Protect the product from moisture, and excess
heat or equipment creating strong magnetic or
electric fields (i.e. speakers.).
• Disconnect the power cable from the AC supply
if the product malfunctions.
• Your product is not intended for industrial use. It
is for personal use only.
• Condensation may occur if your product or a
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
• The batteries used with this product contain
chemicals that are harmful to the environment.
Do not dispose of batteries in the general
household trash.
• Place the loudspeakers at a reasonable distance
on either side of the system to ensure good
stereo sound.
• Direct the loudspeakers towards the listening
area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with
liquids, such as vases, on the apparatus.
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Use only a properly grounded plug and
receptacle.
• An improper ground may cause electric shock
or equipment damage. (Class l Equipment only.)
Disc Storage & Management
• Holding Discs
- Fingerprints or scratches on a disc may
reduce sound and picture quality or cause
skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a disc, clean
it with a mild detergent diluted in
water and wipe with a soft cloth.
- When cleaning, wipe gently from the inside to
the outside of the disc.
• Disc Storage
- Do not keep in direct sunlight.
- Keep in a cool, ventilated area.
- Keep in a clean, protective jacket and store
vertically.
• Condensation may form if warm
air comes into contact with cold
parts inside the product. When
condensation forms inside the
product, it may not operate correctly. If this
occurs, remove any discs in the product, and
then let the product stand for 1 or 2 hours with
the power on.
MM-J430D-SG-ENG-0708.indd 3 2016/2/4 15:19:50
|
4 English
Safety Information
License
This DivX Certified® device has passed rigorous
testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your
device at vod.divx.com. Find your registration
code in the DivX VOD section of your device setup
menu.
DivX Certified® to play DivX® video,including
premium content.
DivX®, DivX Certified® and associated logos
are trademarks of DivX, LLC and are used under
License.
Covered by one or more of the following U.S.
patents: 7,295,673; 7,460,668; 7,515,710;
8,649,669;8,656,183; 8,731,369; RE45,052.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
•
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC
in the United States and other countries.
•
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Copyright
© 2015 Samsung Electronics Co., Ltd. All rights
reserved.
Copy Protection
•
Many DVD discs are encoded with copy
protection. Because of this, you should only
connect your product directly to your TV, not
to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected DVD
discs.
•
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
MM-J430D-SG-ENG-0708.indd 4 2016/2/4 15:19:51
English 5
|
SAFETY INFORMATION
2 Safety Warnings
3 Precautions
3 Disc Storage & Management
4 License
4 Copyright
4
Copy Protection
GETTING STARTED
6 Disc and Format Compatibility
7 Notes on the USB connection
8 Front/Top Panel
9 Rear Panel
9 Accessories
10 Remote control
CONNECTIONS
11 Connecting the Speakers
12 Connecting the Video Out to your TV
SETTINGS
14 The Initial Settings Procedure
14 Accessing the Settings Screen
14 Display
14 TV Aspect
14 BD Wise
15 Resolution
15 Video Out Signal
15 HDMI Format
15 Audio
15 DRC (Dynamic Range Compression)
15 AUDIO SYNC
15 Speaker Selection
16 Audio Return Ch.
16 System
16 Initial Settings
16 Language
16 Security
16 Parental Rating
16 Change Password
16 Support
16 Product Information
BASIC FUNCTIONS
17 Disc Playback
17 Audio CD(CD-DA)/MP3/WMA Playback
17 JPEG File Playback
17 Using the Playback Function
19 Special Sound Effects
20 TV SoundConnect
21 Listening to the Radio
21 Display Function
22 Setting the Clock
22 Timer Function
23 Selecting MY KARAOKE Mode
23 USB Function
24 Recording Function
25 Bluetooth
27 Software update
Contents
OTHER INFORMATION
28 Troubleshooting
29 Specifications
` Figures and illustrations in this User Manual are
provided for reference only and may differ from
actual product appearance.
` An administration fee may be charged if either
a. an engineer is called out at your request and
there is no defect in the product (i.e. where you
have failed to read this user manual)
b. you bring the unit to a repair centre and there
is no defect in the product (i.e. where you
have failed to read this user manual).
` The amount of such administration charge will
be advised to you before any work or home
visit is carried out.
MM-J430D-SG-ENG-0708.indd 5 2016/2/4 15:19:51
|
6 English
Getting Started
Disc and Format Compatibility
Disc types and contents your product
can play
Media Term Disc Type
VIDEO
DVD
DVD-Video or
DVD±R/±RW discs
CD
Data CD (CD DA, CD-R/-
RW)
DivX DVD±R/±RW, CD-R/-RW
MUSIC MP3 CD-R/-RW
PHOTO JPEG CD-R/-RW
Disc types your product cannot play
• LD, CD-G/-I/-ROM, DVD-ROM/-RAM
| NOTES |
\
DVD discs purchased abroad may not play on
this product.
\
This product may not respond to all operating
commands because some DVD, and CD discs
allow specific or limited operation and provide
only certain features during playback. Please
note that this is not a defect in the product.
\
Samsung cannot guarantee that this product
will play every disc bearing the DVD or CD logo
because disc formats evolve, and problems
and errors may occur during the creation of
DVD, and CD software and/or the manufacture
of discs.
\
Please contact the SAMSUNG Customer Care
Centre, if you have questions or encounter
difficulty when playing DVD, or CD discs in
this product. Also, refer to rest of this user
manual for additional information on playback
restrictions.
\
Some commercial discs and DVD discs
purchased outside your region may not play on
this product.
Supported Formats
Video File Support
Format Supported Versions
AVI
DivX3.11,4,5,6
WMV
V1/V2/V3/V7
Music File Support
File
Extension
Audio
Codec
Sampling
Rate
Bit Rate
*.mp3
MPEG 1 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
*.wma
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
AC3
/
44.1/48khz 128~384kbps
• Aspect Ratio : This product supports up to
720x576 pixels. TV screen resolutions higher
than 800 will not be supported.
• When you play a disc whose sampling
frequency is higher than 48khz or 320kbps, you
may experience shaking on the screen during
playback.
• Sections with a high frame rate might not be
played while playing a DivX file.
• Since this product only provides encoding
formats authorized by DivX Networks, Inc., a
DivX file created by the user might not play.
Logos of Discs the product can play
DVD-VIDEO AUDIO-CD DivX
MM-J430D-SG-ENG-0708.indd 6 2016/2/4 15:19:52
English 7
|
Region Code
Both products and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc will
not play. The Region Number for this product is
displayed on the rear panel of the product.
Disc Type
Region
Code
Area
DVD-
VIDEO
1
The U.S., U.S. territories
and Canada
2
Europe, Japan, the
Middle East, Egypt, Africa,
Greenland
3
Taiwan, Korea, the
Philippines, Indonesia,
Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific
Islands, Caribbean
5
Russia, Eastern Europe,
India, North Korea,
Mongolia
6
China
| NOTE |
\
If the Region number of a DVDs does not
correspond to the Region number of this
product, the product cannot play the disc.
Notes on the USB connection
• Supported devices: USB storage media, MP3
player, digital camera
• If a folder or file name is longer than 10
characters, it may not properly display or
operate.
• A subtitle file bigger than 300KB may not be
properly displayed.
• Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones
may not be supported.
• FAT16 and FAT32 file systems are supported.
• Connect directly to the product's USB port.
Connecting through another cable may raise
problems with USB compatibility.
• Inserting more than one memory device to a
multi-card reader may not operate properly.
• PTP protocol for digital camera is not supported.
• Do not disconnect USB device during a "READ"
process.
• Bigger the image resolution, the longer the delay
to displaying.DRM applied MP3/WMA or video
files downloaded from a commercial site are not
played back.
• USB HDD's should be connected to a separate
power source. Otherwise, the HDD's will not
work.
• The maximum current supported by the USB
port for an external device is 500 mA (at 5V DC).
• Supported file formats
Format
Still
Picture
Music Movie
File name
JPG MP3 WMA WMV DivX
File
extension
JPG .JPEG .MP3 .WMA .WMV .AVI
Bit rate
–
80~320
kbps
56~128
kbps
4Mbps 4Mbps
Version
– – V8
V1,V2,
V3,V7
DivX3.11,4,5,6
Pixel
640x480 – – 720x576
Sampling
Frequency
– 44.1kHz 44.1kHz 44.1KHz~ 48KHz
| NOTES |
\
Playing back a JPEG file whose image
resolution is higher than that of DVD may result
in degraded image quality when displayed.
\
A maximum of 999 tracks can be played per
CD.
\
A maximum of 250 folders can be played per
CD.
MM-J430D-SG-ENG-0708.indd 7 2016/2/4 15:19:53
|
8 English
Getting Started
Front/Top Panel
1
POWER button
Press this button to switch your product
on or off.
2
SOURCE button
3
STOP button
4
PLAY/PAUSE button
5
OPEN/CLOSE button
6
VOLUME CONTROL - button
7
VOLUME CONTROL + button
8
AUX IN JACK
1. Use the Audio Cable (not supplied) to connect
AUX IN on the player to Audio Out on the
external analog component.
2. Press to switch the input mode to AUX.
~
If no button actions for more than 8 hours in
AUX mode, the power will automatically turn
off.
9
USB jack
0
DISC tray
!
Display Panel
5V 500mA
AUX IN
5
6
7
1
432
8
9
0
!
USING THE TOUCH BUTTON
¡
Tap on touch screen with your fingertip.
¡
To avoid damage to the touch screen, do not use any object other than your fingers to operate it.
¡
Do not tap on the touch screen if your fingers are not clean.
¡
Do not tap on the touch screen with gloves on.
¡
The touch screen may not function if you use your fingernail or other instrument such as a ballpoint pen.
MM-J430D-SG-ENG-0708.indd 8 2016/2/4 15:19:54
English 9
|
Rear Panel
1. DC 24V (Power Supply In)
• Connect the DC power adaptor to the power
supply jack, and then connect the AC power
adaptor plug to a wall outlet.
2. 2.0 CH Speaker Connector Terminals
The speaker connector terminals are located on
the rear of the system.To achieve the correct
sound quality,
insert the speaker connector
cables identified below into the correct speaker
terminals on the back of the system.
• Left speaker (marked L).
• Right speaker (marked R).
3. ONLY FOR SERVICE
• This jack is for service only. Please do not
use.
4. FM Antenna Connector Terminal
1. Connect the FM antenna (supplied) to the
FM Antenna jack.
2. Slowly move the antenna wire until you find
a location where reception is good, then
fasten it to a wall or other rigid surface.
3. If reception is poor, you may need to install
an outdoor antenna. To do so, connect an
outdoor FM antenna to FM antenna jack on
the rear of the system using a 75Ω coaxial
cable (not supplied).
5. HDMI OUT Jack
Outputs digital video and audio signals
simultaneously using an HDMI cable.
6. VIDEO OUT Jack
Connect your TV's Video Input jack (VIDEO IN) to
the VIDEO OUT jack.
7. COMPONENT VIDEO OUTPUT Jacks
Connect a TV with Component video inputs to
these jacks.
Accessories
Check for the supplied accessories below.
Video Cable FM Antenna
User's Manual
Remote Control/
Batteries
DC Adapter Power Cord
2
3
4
1
5
7
6
MM-J430D-SG-ENG-0708.indd 9 2016/2/4 15:19:55
|
10 English
Getting Started
Remote control
Tour of the Remote Control
Installing batteries in the Remote Control
| NOTES |
\
Place batteries in the remote control so that the polarities (+,- )
match the diagram in the battery compartment.
\
Do not dispose of batteries in a fire.
\
Do not short circuit, disassemble, or overheat the batteries.
\
You could cause an explosion if you replace the battery with the
wrong type of battery. Replace the battery only with the same or
equivalent type.
\
The remote control can be used up to approximately 23 feet
(7 meters) in a straight line from the unit.
* Battery size: AAA
SOUND
DISC MENU
VOLUME -
POWER
TIMER ON/OFF
EQ
TIMER CLOCK
CD REC SPEED
MY KARAOKE
DISPLAY, A
MO/ST, B
RETURN
TUNING ,Skip
STOP
TOOLS
PLAY
REPEAT
Number(0~9)
TITLE MENU
DVD
SOURCE
C
USB REC
PAUSE
Search
VOLUME +
HOME
INFO
D
EXIT
CURSOR, ENTER
1
2
3
4
5 6
7
8
0
9
VOL VOL
TOOLS
RETURN
EXIT
INFO
MO/STDISPLAY
SLEEP
MY KARAOKE
A B C D
TUNING
HOME
USB REC
REPEAT
TIMER
CD REC
SOURCE
SOUND
DISC MENU TITLE MENU
SPEED ON/OFF CLOCK
DVDEQ
MUTE (Turn off the sound temporarily. Press
again to turn the sound back on.)
SLEEP (Press and hold sleep button,set a sleep
time to shut off the product.)
MM-J430D-SG-ENG-0708.indd 10 2016/2/4 15:19:56
English 11
|
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Speaker (R)
Speaker (L)
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away
from the TV.
Example : For 32" TV's 2~2.4m
For 55" TV's 3.5~4m
Speakers
ei
Place these speakers in front of your listening position, facing inwards (about
45°) toward you. Place the speakers so that their tweeters will be at the same
height as your ear.
| CAUTION |
\
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
\
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
| NOTE |
\
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic
field generated by the speaker. If this occurs, place the speaker away from your TV set.
Connections
MM-J430D-SG-ENG-0708.indd 11 2016/2/4 15:19:56
|
12 English
Connections
Connecting the Video Out to your TV
Choose one method for connecting to a TV.
METHOD 1 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable (not
supplied) from the COMPONENT OUT (Pr, Pb and Y) Jacks on the back of the product to the Component
Video Input Jacks on your TV.
METHOD 2 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN
jack on your TV.
METHOD 3 : HDMI
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
| NOTES |
\
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 15 for the resolution setting.
\
This product operates in Interlace scan mode 480i(576i) for component/composite output.
\
After making the video connection, set the Video input source on your TV to match the corresponding Video output
mode on your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for more
information on how to select the TV's Video Input source.
COMPONENT IN
TV
VIDEO INPUT
METHOD 2
(supplied)
METHOD 1
( not supplied)
METHOD 3
(not supplied)
MM-J430D-SG-ENG-0708.indd 12 2016/2/4 15:19:57
English 13
|
! CAUTION
` Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
If your TV is Samsung TV and it supports CEC function.The product's video output will automatically change to HDMI
mode when connecting an HDMI cable while power is on.
•HDMI (High Definition Multimedia Interface)
•HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
•HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
-
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
•What is the HDCP?
•HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is
only available with SAMSUNG TV's that support Anynet+(HDMI-CEC).
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 12)
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
| NOTES |
\
The Anynet+ function supports some buttons of the remote control.
\
This function is not available if an HDMI cable does not support CEC.
\
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
\
Please check the Anynet+(HDMI-CEC) logo (If your TV has an Anynet+(HDMI-CEC) logo, then it supports Anynet+
function.)
Using ARC(Audio Return Channel)
ARC is feature that transfer audio from the TV back to the product and listen to your TV's audio through the
product instead of the TV's speakers without having to connect a second cable between the TV and other
audio system.
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 12)
2. Press the
SOURCE
button to select ARC input.
•
You c
an select ARC by pressing the SOURCE button on the remote control and the product.
•
When you select the TV speaker on TV and then the main set will display"S MUTE".
•
On S MUTE MODE,EQ/SOUND/VOL/MUTE button doesn't work.
MM-J430D-SG-ENG-0708.indd 13 2016/2/4 15:19:57
|
14 English
Settings
The Initial Settings Procedure
Press the POWER button when it is plugged in
TV for the first time. Initial Settings screen will be
displayed.
▲▼ (select the desired language)
v
▲▼ (select the desired TV Aspect)
v
.
>
Move
"
Select
Initial settings > On-Screen Language
Select a language for the on-screen displays
English
한국어
Nederlands
Français
Deutsch
Italiano
| NOTES |
\
The initial screen may appear different, depending on
the content of the disc.
\
If you move to the previous screen, press and hold the
RED(A) button.
\
Once you select a menu language, you can change it
by pressing the
5
button on the top panel for more
than 5 seconds with no disc.
\
If you want to display the Initial Setting screen again
and make changes, select the Reset option.
Accessing the Settings Screen
1. Press the POWER button.
2. Press the ◄► buttons to select Settings,
then press the v button. The Settings screen
appears.
3. To access the menus, sub-menus, and options
on the Settings screen, please refer to the
remote control illustration below.
Buttons on the Remote Control Used
for the Settings Menu
1
HOME Button : Press to move to the Home
screen.
2
RETURN Button : Return to the previous menu.
3
v
(Enter) / DIRECTION Button :
• Press ▲▼◄► to move the cursor or select
an item.
• Press the
v
button to activate the currently
selected item or confirm a setting.
4
EXIT Button : Press to exit the current menu.
Display
TV Aspect
• 4:3 Pan-Scan: Select when you want to see the 16:9
video supplied by the DVD without the black bars on
top and bottom, even though you have a TV with a 4:3
ratio screen.
• 4:3 Letterbox: Select when you want to see the total
16:9 ratio screen DVD supplies, even though you have
a TV with a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
• 16:9 Wide: You can view the full 16:9 picture on your
widescreen TV.
| NOTES |
\
If a DVD is in the 4:3 ratio, you cannot view it in the
wide screen.
\
Since DVD discs are recorded in various image formats,
they will look different depending on the software, the
type of TV, and the TV aspect ratio setting.
\
When using HDMI, the screen is automatically
converted to the 16:9 Wide mode and TV Aspect is
deactivated.
BD Wise
(Samsung products only)
BD Wise is Samsung's latest inter-connectivity
feature. When you connect Samsung products
with BD-Wise to each other via HDMI, the optimum
resolution will be set automatically.
Settings
1
2
3
4
5 6
7
8
0
9
VOL VOL
TOOLS
RETURN
EXIT
INFO
MO/STDISPLAY
SLE E P
MY KARAOKE
A B C D
TUNING
HOM E
USB R E C
REP E A T
TIM E R
CD REC
SOURCE
SOUND
DISC MENU TITLE MENU
SPEED ON/OFF CLOCK
DVDEQ
1
2
4
3
Source DVD/CD
Settings
MM-J430D-SG-ENG-0708.indd 14 2016/2/4 15:19:58
English 15
|
• On : The original resolution of the DVD disc will be
output to the TV direct.
• Off : The output resolution will be fixed according to
the Resolution previously set, regardless of the
resolution of the disc.
| NOTES |
\
This will optimize the picture quality according to the
content (In the DVD disc, etc) that you want to play and
the product or your BD Wise-compliant Samsung TV.
\
If you want to change the resolution in BD Wise mode,
you must set BD mode to Off in advance.
\
BD Wise will be disabled if the product is connected to
a device that does not support BD Wise.
Resolution
Sets the output resolution of the HDMI video signal.
The number in 480p(576p), 720p, 1080i and 1080p
indicates the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
• 480p(576p)
: Outputs 480 lines of progressive
video.
•
720p :
Outputs 720 lines of progressive video.
•
1080i :
Outputs 1080 lines of interlaced video.
•
1080p:
Outputs 1080 lines of progressive video.
•
BD Wise :
Automatically sets the optimal resolution
when connected via HDMI to a TV with the BD
Wise feature. (The BD Wise menu item appears
only if BD Wise is set to On.)
| NOTES |
\
If Component or Composite is connected, the resolution
supports only 480i(576i).
\
1080P may not appear depending on TV.
Video Out Signal
Different countries apply different TV standard.You
can select from NTSC or PAL.
•NTSC : You can set to the NTSC video format
•PAL : You can set to the PAL video format
| NOTE |
\
Depending on the type(NTSC or PAL) of main unit you
have, the TV screen displayed may be different.
HDMI Format
You can optimize the color setting from the HDMI
output. Select a connected device Type.
• Monitor : Select if connected to a Monitor via
HDMI.
• TV : Select if connected to a TV via HDMI.
Audio
DRC (Dynamic Range Compression)
This feature balances the range between the
loudest and quietest sounds. You can use this
function to enjoy Dolby Digital sound when
watching movies at low volume at night.
• You can select either Full, 6/8, 4/8, 2/8, Off.
AUDIO-SYNC
Video and audio sync may not match with digital
TV. If this occurs, adjust the audio delay time to
match the video.
• You can set the audio delay time between 0 mS and
300 mS. Set it to the optimal status.
Speaker Selection
The audio signals transmitted over the HDMI Cable
can be changed Audio System/TV Speaker.
• Audio System : Video is transmitted over the HDMI
connection cable only, and audio is
output through the product speakers
only.
• TV Speaker : Both video and audio signals are
transmitted over the HDMI connection
cable, and audio is output through your TV
speakers only.
| NOTES |
\
The default setting of this function is Audio System .
\
HDMI Audio is automatically down-mixed to 2ch for TV
speakers.
\
When TV Selection is set to TV Speaker, EQ/POWER
BASS/Recording/MY KARAOKE/VOL/MUTE doesn't
work.
\
With Speaker Selection set to 'TV Speaker', the volume
can be adjusted only using the TV remote control.
MM-J430D-SG-ENG-0708.indd 15 2016/2/4 15:19:59
|
16 English
Settings
Audio Return Ch.
You can enjoy TV sound from the speakers by
using just one HDMI cable.
•Off : Turn the Audio Return Channel function off.
•Auto: Listen to TV sound from the speakers if
your TV is compatible with the Audio Return
Channel function.
| NOTES |
\
When Anynet+ (HDMI-CEC) is Off, the Audio Return
Channel function is not available.
\
Using an ARC (Audio Return Channel)-uncertified
HDMI cable may cause a problem in compatibility.
\
ARC function is only available if an ARC-compliant TV
is connected.
\
If no ARC signal for more than 25 minutes, the power
will automatically turn off.
System
Initial Settings
By using the Initial Settings, you can set the
language and TV aspect .
| NOTE |
\
If an HDMI cable is connected to the product, the TV
aspect does not appear and it is set to 16:9 Wide
automatically.
DivX(R) VOD
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
| NOTE|
\
Even after you reset the system, the settings of DivX
Registration will not be reset.
Language
You can select the language you prefer for on-
screen menu, disc menu, etc.
To select a language that does not appear in the
menu, select OTHERS in the Disc Menu, Audio and
Subtitle, and enter the language code of your country.
For more information, refer to www.samsung.com or
call to Samsung customer service center.
| NOTES |
\
You cannot select OTHERS in the OSD Language
menu.
\
The selected language will only appear if it is
supported on the disc.
Security
The Parental Lock function works in conjunction
with DVDs that have been assigned a rating,
which helps you control the types of DVDs that
your family watches. There are up to 8 rating levels
on a disc.
Parental Rating
Select the rating level you want to set. Enter the
password and then press the
v
button.
• The password is set to "0000" by default.
Change Password
Select Change and enter the 4-digit password to
set the parental lock using the number buttons on
the remote control.
If you forgot your password
In No Disc
mode, Press and hold the
5
button on the
remote control for 5 seconds or more. All settings will
revert to the factory settings.
Support
Product Information
Provide the product information such as Model
code, Software Version, etc.
MM-J430D-SG-ENG-0708.indd 16 2016/2/4 15:19:59
English 17
|
Basic Functions
Disc Playback
OPEN/CLOSE
Place a disc gently into the tray
with the disc's label facing up
OPEN/CLOSE
.
| NOTES |
\
When you stop disc play, the product remembers
where you stopped, so when you press
6
button
again, it will pick up where you left off. (Resume
function works only with DVDs.)
Press the
5
button twice during playback to disable
the Resume function.
\
If no buttons are pressed on the product or remote control
for more than 3 minutes when the product is in Pause mode,
it will be changed to stop mode.
\
Pirated discs will not play in this product because they violate
the CSS (a copy protection system) recommendations.
\
will appear when an invalid button is pressed.
\
If no button input is made for more than 5 minutes in Stop or
Play (music) mode, the screen saver will get activated.
\
If the product is left in the screen saver mode for more
than 20 minutes, the power will automatically turn off.
(Except during play a music)
\
DTS Audio is not supported.
Audio CD(CD-DA)/MP3/WMA
Playback
1. Insert an Audio CD(CD-DA) or an MP3 Disc.
• For an Audio CD, the first track will be played
automatically.
- Press the
[]
buttons to move to the
previous/next track. You can also use the
Number(0~9) button to select the desired track.
• For the MP3/WMA disc, press the
_+
buttons to
select Music, then press the
v
button.
- Press the
$%_+
buttons to select a desired
file and press the
v
button.
- Press the
()
buttons to move to the
previous/next pages.
2. Press the 5 button to stop playback.
| NOTES |
\
Some MP3/WMA-CDs may not play, depending on
the recording mode.
\
Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
\
WMA-DRM files cannot be played.
\
If no buttons are pressed on the product or remote control for
more than 25 minutes when the product is in Stop mode or
no Disc mode, the power will automatically turn off.
JPEG File Playback
Insert a JPEG disc
_+
(select Photos)
v
$%
(select the desired folder)
v
$%
(select the
desired photo)
v
• The selected file will play and slide show will start.
To stop slide show, press the
7
button.
• You can view the previous/next file by pressing the
_
,
+
,
[
,
]
buttons during the slideshow mode.
Rotate Function
Press the GREEN(B) or YELLOW(C) button
during the PAUSE mode.
• GREEN(B) Button: Rotate 90° Counterclock wise.
• YELLOW(C) Button: Rotate 90° Clockwise.
| NOTE |
\
The maximum resolutions supported by this product
are 5120 x 3480 (or 19.0 MPixel) for standard JPEG
files and 2048 x 1536 (or 3.0 MPixel) for progressive
image files.
Using the Playback Function
Forward/Reverse Search
Press the
()
buttons for Search Function.
| NOTE |
\
No sound is heard during the fast playback (except
CD-DA x 1 and CD-DA x 2).
Skipping Scenes/Songs
Press the
[]
buttons.
• Each time the button is pressed during playback, the
previous or next chapter, track or directory (file) will be
played.
• You cannot skip chapters consecutively.
Skipping Folder
When the Music/Video/Photo files on play and
stop mode, press and hold the
[]
buttons on
the remote control.
• It will skip to the previous/next folder, and "File
Searching..." is displayed.
| NOTES |
\
In Forward/Reverse/Pause/Step/Slow mode, this
function does not work.
\
Depending on the content of the file or the folder, the
skipping time may be different.
MM-J430D-SG-ENG-0708.indd 17 2016/2/4 15:20:00
|
18 English
Basic Functions
Slow Motion Play
Press the
7
button and then press the
)
button
for Slow Motion play.
| NOTES |
\
No sound is heard during slow playback.
\
Reverse slow playback does not work.
\
This function is available for the DivX/DVD.
Step Motion Play
Press the
7
button repeatedly.
• The picture moves forward one frame each time the
button is pressed during playback.
| NOTES |
\
No sound is heard during step motion playback.
\
This function is available for the DivX/DVD.
5 Minute Skip Function
During playback, press the
_
,
+
button.
• Playback skips 5 minutes forward whenever you press
the
+
button.
• Playback skips 5 minutes backward whenever you
press the
_
button.
| NOTE |
\
This function is available only for the DivX that contains
time information.
Using the Disc/Title Menu
During playback, press and hold
DISC MENU or TITLE MENU
;
$%_+
;
v
• Disc Menu : You can view the menus for the audio
language, subtitle language, profile, etc.
• Title Menu : For DVDs containing multiple titles, you
can view the title of each movie.
| NOTE |
\
Depending on the disc, menu setup items may vary
and this menu may not be available.
Repeat Playback
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B
Repeat) of the DVD/DivX.
1. During DVD/DivX playback, press the REPEAT
button on the remote control.
2. Press the $% buttons to select a desired
repeat mode, then press the
v
button.
3. Press the ▲▼ buttons to select OFF to return
to normal play, then press the
v
button.
• DVD :
Off
➞
Title
➞
Chapter
➞
A-B
•
DivX:
Off
➞
Title
➞
Folder
➞
All
CD/MP3 Repeat
During the CD/ MP3 playback, press the REPEAT button
repeatedly to select the repeat mode you want.
• CD : (Off)
;
(Track)
;
(All)
;
(Random)
;
(Section A-B)
• MP3 : (Off)
;
(Track)
;
(Directory)
;
(All)
;
(Random)
A-B Repeat Playback
You can repeatedly play back a designated
section of a DVD or CD.
1. During the DVD disc or CD playback, press the
REPEAT button on the remote control.
2. For DVD, press the $% buttons to select A-. For CD,
press the REPEAT button repeatedly until
appears.
3. Press the
v
button at the point where you want
repeat play to start (A).
4. Press the
v
button at the point where you want
repeat play to stop (B).
5. To return to normal playback,
For DVD, press the REPEAT button to select to OFF.
For CD, press the REPEAT button to select to .
| NOTES |
\
The A-B Repeat function does not operate with DivX,
MP3 or JPEG discs.
\
For DVD, point B cannot be set until 5 seconds of
playback has elapsed from point A.
Displaying Disc Information
1. During playback, press the TOOLS button on the
remote control.
2. Press the $% buttons to select the desired item.
3. Press the _+ buttons to make the desired setup
change and then press the
v
button.
• You may use the number buttons of the remote
control to control some items.
4. To make Disc information disappear, press the
TOOLS button again.
| NOTE |
\
Some tools menus may differ depending on discs and
files.
MM-J430D-SG-ENG-0708.indd 18 2016/2/4 15:20:01
English 19
|
TOOLS menu
• Title( ) : To access the desired title when there is
more than one in the disc.
• Chapter( ) : Most DVD discs are recorded in
chapters so that you can quickly find a specific chapter.
• Playing time( ) : Allows playback of the film from
a desired time. You must enter the starting time as a
reference. The time search function does not operate
on some discs.
• Audio( ): Refers to the film's soundtrack language.
A DVD Disc can contain up to 8 audio languages.
• Subtitle( ): Refers to the subtitle languages
available in the disc. You will be able to choose the
subtitle languages or, if you prefer, turn them off from
the screen. A DVD Disc can contain up to 32 subtitle
languages.
• Angle( ): When a DVD contains multiple angles of a
particular scene, you can use the Angle function.
TOOLS
$%
(select AUDIO, SUBTITLE or ANGLE)
_+
(select the desired option)
| NOTES |
\
Depending on the disc, the Subtitle and Audio
Language functions may not be available.
\
The Angle function works only with discs on which
multiple angles have been recorded.
Caption Function
• You must have some experience with video extraction
and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi)
in the same file name as that of the DivX media file (*.avi)
within the same folder.
• Up to 60 alphanumeric characters or 30 East Asian
characters (2 byte characters such as Korean and
Chinese) for the file name.
• The subtitle of DivX files are *.smi, *.sub, *.srt over 148
kbyte is not supported.
Special Sound Effects
Your Micro Component System provides
predefined equalizer settings that are optimized for
particular music genre.
• Operational only in LPMC 2ch stream.
• These functions are not available during playback of a
AC-3 signal.
EQ
1. Press the EQ button.
• Each time you press this button, the sound mode
will switch as following:
FLAT
;
ARABIC MUSIC
;
PERSIAN MUSIC
;
GENGE
;
BONGO
;
RHUMBA
;
ESKISTA
;
AFROPOP1
;
AFROPOP2
;
INDIAN POP
;
PARTY
;
POP
;
HIP HOP
;
ROCK
;
JAZZ
;
CLASSICAL
;
ELECTRONIC
;
OFF
| NOTES |
\
The equalizer is set to "OFF" automatically and is not
available during a Recording.
\
If no buttons are pressed within 4 seconds, your
settings will automatically be cancelled and the
previous settings will be saved.
\
The equalizer mode may be different depending
on your region.
POWER BASS
Your Micro-component system has a bass
amplification function called Power Bass.This
function makes the sound more powerful and real.
1. Press the SOUND button on the remote
control.
Result: “
ON -POWER BASS
” is displayed.
2. To cancel this function, press this button
again, “OFF-POWER BASS” is displayed
for a few seconds.
| NOTES |
\
The Power Bass is set to "OFF" automatically and
becomes not available during a CD recording.
MM-J430D-SG-ENG-0708.indd 19 2016/2/4 15:20:01
|
20 English
Basic Functions
TV SoundConnect
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Micro Component by using the TV
SoundConnect function.
Connecting the Micro Component to a
SoundConnect Compatible Samsung TV
Before activating this function, be sure to activate
the Samsung TV's SoundConnect or SoundShare
mode.
1. Press the SOURCE button to display the TV
SOUND CONNECT message.
WAIT
;
SEARCH
;
REQUEST
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to the
TV's user manual for details.)
3. When the Micro Component is connected to
the TV, it will display [TV] Name
;
CONNECTED
;
TV on the front display.
4. The audio from the connected TV plays over the
Micro Component audio system.
• In TV SoundConnect mode, the Play/
Repeat/Stop/Next/Back functions are not
available.
• The SoundConnect feature is available on
some Samsung TVs released since 2012.
Check whether your TV supports the
SoundShare or SoundConnect function.
(For further details, refer to the TV's user's
manual.)
• If you unplug the Micro Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Micro
Component into an outlet, and then set the
TV SoundConnect connection again.
• Only one Micro Component at a time can be
connected to a TV via TV SoundConnect.
• To connect to another TV in TV
Soundconnect mode, press the
p
button
on the main set for more than 5 seconds,
and then connect to the other TV by
following the directions above.
To disconnect the TV from the Micro
Component
You can disconnect the TV from the Micro
Component.
For instructions, see the TV's user manual.
• When the Micro Component is disconnected
from the TV, the Micro Component will display TV
DISCONNECTED
;
REQUEST on its display.
To disconnect the Micro Component from the
TV
Press another mode button on the top panel of the
Micro Component to switch from TV SoundConnect
mode to another mode or turn off the Micro
Component. The currently connected device is
disconnected.
• The connected TV will wait a certain amount of
time for a response from the Micro Component
before terminating the connection.(Disconnection
time may differ, depending on the TV)
• The connection may be lost or sound may stutter
if the distance between the TV and the Micro
Component exceeds 6.5 feet (2 m).
• Instability in the network environment may cause
the connection to be lost or sound to stutter.
• In TV SoundConnect mode, the Micro
Component automatically turns off after 25
minutes if it is not connected to a TV.
MM-J430D-SG-ENG-0708.indd 20 2016/2/4 15:20:02
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Samsung MM-J430D User manual

Samsung
Brand
Samsung
Model
MM-J430D
Category
Home cinema systems
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents