Netrix Navigator
V0.1
Netrix Navigator
Netrix Navigator 2
Copyright
This document may not be copied in whole or in part or otherwise reproduced without
prior written consent from IndigoCare Europe or IndigoCare USA, except where specifically
permitted under international copyright law.
Disclaimer
The information in this document is subject to change without notice. IndigoCare Europe
or IndigoCare USA assumes no responsibility for inaccuracies or omissions and specifically
disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a consequence,
directly or indirectly, of the use or application of any of the contents of this document. For
the latest documentation, contact IndigoCare Europe or Indigocare USA.
This publication may contain examples of screen captures and reports or database used in
daily operations. Examples may include fictitious names of individuals and companies. Any
similarity to names and addresses of actual businesses or persons is entirely coincidental.
All examples of patient information in this document are fictitious. Any resemblance to a
real patient or facility is purely coincidental. The owners and users of this product are
solely responsible for complying with all applicable patient information laws. The users, by
their use of this product, agree to indemnify the manufacturer and/or seller of this
product against all claims, litigation, and suits filed for patient information violations.
Intended use
Use this product only for the purpose it was designed for; refer to the data sheet and user
documentation for details. For the latest product information, contact Indigocare Europe
or IndigoCare USA.
This hardware installation guide is a working and supporting tool for certified engineers for
installing and maintaining iCall installations.
Netrix Navigator 3
Contact information
IndigoCare USA IndigoCare Europe
1001 South Dairy Ashford, Suite 100 Schoebroekstraat 48
Houston, TX 77077 3583 Paal
USA Belgium
T: +1 713.595.6698 T: +32 11 247090
F: +1 713.595.6699 F: +32 11 247099
Email: usa@indigocare.com Email: Europe@indigocare.com
www.indigocare.com www.indigocare.com
Netrix Navigator 4
1. Netrix Navigator
The netrix navigator consists of 2 parts. The settings in the netrix and the part in
the website.
1.1. Netrix
To enter the settings for the navigator in the netrix go to set-up -> WEB.
1.1.1. WIZARD
Conversion tables and groups are automatically generated by following 9 steps.
STEP1: Add periods
Here you can add 8 periods, this is the same as in the website of an IP unit.
Netrix Navigator 5
STEP2: Select the needed groups
Here you can select which groups for the types of calls you want to be made.
STEP3: Create groups
Here you can choose if you want the groups to be created automatically and for
which participant (ESPA,Alcatel,…)
Netrix Navigator 6
STEP4: Give wards
Here you can add the wards/departments for your system. You can also do this
when you choose wards in the web menu. For further info see part 1.1.5 Wards.
STEP5: Give rooms per ward
Add the rooms for each ward. This option is also available in the web menu. Further
info see part 1.1.2 Rooms.
Netrix Navigator 7
STEP6: Give devices per ward
Add devices for each ward, this is also available in the web menu. Further info
check 1.1.3 Devices.
STEP7: Enter users
Here you add or choose the users who need access to the wards and rooms you
chose in the steps before. Like the other steps the user step is also found in the
web menu, so for further explanation see step 1.1.4 Users.
Netrix Navigator 8
STEP8:
Automatic generation of the conversion tables and groups.
STEP9: make a route for each period
Netrix Navigator 9
In step 9 you can see examples how to program the routes in the IP units. So you
just copy what you see here in the IP unit and the communication between the
netrix groups that are automatically made, is in order. The examples will show for
each period how to fill in the routes in the IP unit.
Netrix Navigator 10
1.1.2. Rooms
Here you can add the rooms and to which ward/department they belong. The list
you make here can be used in the wizard.
Netrix Navigator 11
1.1.3. Devices
Here you can add the devicenumbers (for alcatel,ESPA,…) to the ward/department
they belong.
Netrix Navigator 12
1.1.4. Users
Here you can add the users that have access to the website of the navigator.
Just fill in the name, first name, username and password. Also fill in to which ward
they are connected.
Netrix Navigator 13
1.1.5. Wards
In the wards menu you can add the different wards/departments.
Netrix Navigator 14
1.2. Website
The website is the user part of the navigator, here you can program which
devicenumber is connected to the different rooms and choose the netrix group where
everything has to be send to.
You can access the website on the netrix via http://127.0.0.1/netrix or from another
pc in the network by browsing http://(IP address netrix )/netrix .
In the main window of the website you can login with the username and password.
Netrix Navigator 15
When you login choose iCall in the menu.
Then choose the ward and the period you want.
Netrix Navigator 16
In this window just drag and drop the devices in the right into the field
corresponding with the roomnumber and which route or group the messages need to
be send. After everything is done don’t forget to press the save button.
/