Holiday Living TGA6P3789D00 User manual

ITEM #0527803

10.5 FT PRE-LIT

CLEVELAND PINE

MODEL #TGA6P3789D00

Français p. 7

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-888-919-0070, 8 a.m. - 5 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

3. Remove protective cap from tree middle section 1 (2). Insert tree

middle section 1 (2) into tree bottom section (1). Connect the

connector as shown on page 2.

4. Remove protective cap from tree middle section 2 (3). Insert tree

middle section 2 (3) into tree middle section 1 (2). Connect the

connector as shown on page 2.

ASSEMBLY INSTRUCTIONS

2. Remove protective cap from tree bottom section (1). Insert tree

bottom section (1) into tree stand (5). Fasten the eye bolts

toward the tree trunk. Connect the controller (6) and power

adapter (7) as shown on page 2.

Eye Bolt

Click

Eye Bolt

1. Set up the tree stand (5) by pulling apart the legs of the stand so

that they are snapped into an x-shape, then place the tree stand

(5) on a level surface.

After inserting the bottom section of the tree into the assembled

stand (5), fasten the eyebolts into the stand and tighten until the

tree pole is firmly secured.

NOTE: To close the tree stand (5), unfasten the eyebolts, press

the metal button and fold the legs together.