Bethel Farms SPBM32 User manual

PREPARE HOLES

Mow existing lawn close to the ground and water thoroughly.

Dig holes 18” on center, 3” deep.

FERTILIZE

Apply 1 tsp. of quality slow release fertilizer in each hole. This

fertilizer acts like a booster to prime and repair the trouble spot

in advance of plugging.

PLANT PLUGS

Press ﬁrmly into the fertilizer primed hole with NO air space

around edges. Turf runners should be ﬂush to the ground.

WATER PLUGS

After area has been plugged and fertilized, water thoroughly

to remove air pockets for optimal performance.

POST PLUG CARE

Thoroughly watering EVERY DAY is the key to plugging

success! Keep soil moist at least 6” to 8” deep. Once plugs

are rooted (10-20 days), new runners should appear. Decrease

watering to twice per week.