TALLY REPRESENTATIVES
GERMANY U.S.A. UNITED KINGDOM
TallyGmbH Tally Corp. Tally Ltd.
Postfach 29 69 P.O.Box 97018 Molly Millars Lane
D-89019 Ulm 8301 South, 180th Street Wokingham, Berkshire
Deutschland Kent, WA 98032 RG41 2QT
Tel: +49 7308 80 0 U.S.A. England
Fax: +49 7308 5903 Phone: +1 425 25155 00 Phone: +44 118 978 8711
Mailbox: +49 7348 23574 Fax: +1 425 25155 20 Fax: +44 118 979 1491
http://www.tally.de http://www.tally.com http://www.tally.uk
ITALY CANADA AUSTRIA
Tally S.R.L. Tally Corp. Tally Ges.m.b.H.
Via Borsini 6 125 Traders Boulevard, 9 Eduard Kittenberger Gasse 95 B
I-20094 Corsico (MI) Missisauga, Ontario L4Z 2E5 A-1232 Wien
Italia Canada Austria
Tel: +39 02 48608 1 Phone: +1 905 8904646 Tel: +43 1 86340 0
Fax: +39 02 48601 141 Fax: +1 905 8904567 Fax: +43 1 86340 240
Mailbox: +39 02 48608 323 http://www.tally.com http://www.tally.at
http://www.tally.it
FRANCE C.I.S.
Tally S.A. Tally Representative
Les Champs Phillippe Park Place Moscow
6-8, Avenue de Verdun Office D-206
F-92257 La Garenne-Colombes Cedex Leninsky Prospekt 113/1
France 117198 Moscow
Tèl.: +33 1 413011 00 Russia
Fax: +33 1 413011 10 Phone: +7 502 256 56 40
http://www.tally.fr Inside C.I.S.: 095 956 56 40
Fax: +7 502 256 56 41
SPAIN Inside C.I.S.: 095 956 56 41
Tally SRL http://www.tally.com
Aleixandre 8, 2°A
28033 Madrid
España
Phone: +34 91 7219 181
Fax: +34 91 7219 936
http://www.Tally.it
November 1998 Tally GmbH 379 513 b
Installation of
Interface RS 232
Interface RS 422
The interface box must include:
1 I/O Module
1 I/O Cover
2 Screws
1 Installation Guide
T2240/9
T2240/24
T2340/9
T2340/24
Installing the
Serial Interface Module
- Switch printer power off („O“) .
- Lift up the paper tray of the printer .
- Remove the original interface cover,
pull it out.
- Insert the Serial Interface Module as
shown above.
- Fix the Serial Interface Module with 2 screws.
- Plug the connector of the Serial Interface
Module into the connector of the logic board
correctly, it is keyed.
- Insert the interface cover delivered with
the module.
- Switch printer power on („I“).
- Select the serial I/O via the menu of the printer.
See reference manual.
/
