Juniper JSA7500 Hardware Guide

Juniper Secure Analycs Hardware Guide

Published

2021-05-24

Juniper Networks, Inc.

1133 Innovaon Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc.

in the United States and other countries. All other trademarks, service marks, registered marks, or registered service

marks are the property of their respecve owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right

to change, modify, transfer, or otherwise revise this publicaon without noce.

Juniper Secure Analycs Hardware Guide

The informaon in this document is current as of the date on the tle page.

YEAR 2000 NOTICE

Juniper Networks hardware and soware products are Year 2000 compliant. Junos OS has no known me-related

limitaons through the year 2038. However, the NTP applicaon is known to have some diculty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentaon consists of (or is intended for use

with) Juniper Networks soware. Use of such soware is subject to the terms and condions of the End User License

Agreement ("EULA") posted at hps://support.juniper.net/support/eula/. By downloading, installing or using such

soware, you agree to the terms and condions of that EULA.

ii

Table of Contents

About This Guide | vii

1

Overview

Introducon | 2

JSA Appliance Models | 2

JSA Appliance Hardware Features | 3

2

Components

Hardware Components and Specicaons | 6

Hardware Specicaons | 6

JSA Transceiver Interface | 8

JSA7500 | 10

JSA7500 Front Panel | 10

JSA7500 Back Panel | 12

3

Planning

Site Preparaon | 15

Addional Hardware Requirements | 15

General Site Installaon Guidelines for the JSA Appliance | 16

JSA Appliance Rack Requirements | 17

4

Safety

General Safety and Regulatory Informaon | 20

General Safety Guidelines and Warnings | 20

Denions of Safety Warning Levels | 21

Fire Safety Requirements | 23

Qualied Personnel Warning | 24

Warning Statement for Norway and Sweden | 25

iii

Agency Approvals for JSA | 26

Radiaon and Laser Warnings | 28

Laser and LED Safety Guidelines and Warnings for JSA | 28

Radiaon from Open Port Apertures Warning | 31

Installaon and Maintenance Safety Informaon | 33

Installaon Instrucons Warning | 33

Chassis Liing Guidelines for JSA | 34

Ramp Warning | 35

Rack-Mounng Warnings | 35

Grounded Equipment Warning | 40

Maintenance and Operaonal Safety Guidelines and Warnings | 41

Power and Electrical Safety Informaon | 47

General Electrical Safety Guidelines and Warnings | 47

Prevenon of Electrostac Discharge Damage | 49

AC Power Electrical Safety Guidelines | 51

AC Power Disconnecon Warning | 52

DC Power Electrical Safety Guidelines | 53

DC Power Disconnecon Warning | 54

DC Power Grounding Requirements and Warning | 56

DC Power Wiring Sequence Warning | 57

DC Power Wiring Terminaons Warning | 59

Mulple Power Supplies Disconnecon Warning | 60

TN Power Warning | 61

Acon to Take Aer an Electrical Accident | 61

Compliance Statements | 63

Compliance Statements for EMC Requirements for JSA | 63

iv

Compliance Statements for Acousc Noise for JSA | 66

Compliance Statements for NEBS Standards for JSA7500 | 66

5

Installaon

Hardware Installaon Overview | 69

Rack-Mount Installaon Overview | 69

Required Tools and Parts for Installing the JSA Appliance | 69

Soware Installaon Overview | 71

JSA Components | 71

Browser Support | 73

Preparing the Network Hierarchy | 73

Connecng the JSA Appliance | 77

Grounding the JSA7500 Appliance | 77

Connecng JSA7500 to a DC Power Source | 80

Connecng to a Management Device | 82

Installing the JSA Appliance | 83

Installing the JSA Hardware | 83

Front-and-Rear-Mounng the JSA Appliance Flush to a Rack | 86

Front-and-Rear-Mounng the JSA Appliance Recessed in a Rack | 87

Front-and-Rear-Mounng the JSA7500 in a 4-Post Sliding Rail Rack | 88

Mid-Mounng the JSA Appliance in a Two-Post Rack | 92

Installing the CNA Module on the JSA7500 Appliance | 94

Conguring Basic Sengs | 96

Idenfying Network Sengs | 96

Idenfying Security Monitoring Devices and Flow Data Sources | 97

Idenfying Network Assets | 97

Conguring Secure Web Access | 99

Conguring the Basic Sengs | 99

v

Accessing the JSA Interface | 102

6

Maintenance

Maintaining the Hardware | 105

Field-Replaceable Units on the JSA Appliance | 105

Replacing the Fan on the JSA Appliance | 106

Replacing the Air Filter on the JSA7500 Appliance | 109

Replacing an AC Power Supply on the JSA Appliance | 110

Replacing AC Power Supply Cables on the JSA Appliance | 111

Replacing a DC Power Supply on the JSA Appliance | 112

Replacing DC Power Supply Cables on the JSA Appliance | 113

7

Troubleshoong

Monitoring Hardware Components | 115

RAID Array | 115

Power Supply | 116

Cooling Fans | 117

Maintaining the JSA7500 Air Filter | 117

Juniper Networks Technical Assistance Center | 119

Contacng Juniper Networks Technical Assistance Center | 119

Knowledge Base | 120

vi

About This Guide

Use this guide to install hardware and perform inial soware conguraon, roune maintenance, and

troubleshoong for JSA7500.

Aer compleng the installaon and basic conguraon procedures covered in this guide, refer to the

JSA soware documentaon for informaon about further soware conguraon. See Juniper Secure

Analycs.

Juniper Secure Analycs (JSA) appliances are designed to respond to the right threats at the right me

through eecve analysis of networks, events, and audit log les. JSA has the ability to idenfy

environmental anomalies in the network, an aack path, and the source of a threat. JSA provides

network remediaon for threat responses across all security products.

RELATED DOCUMENTATION

Hardware Guide

Quick Start Guide

Release Notes

Introducing JSA5500

Introducing JSA7500

STRM Series to JSA Series Migraon Guide

Installing JSA Using a Bootable USB Flash-Drive Technical Note

vii

1

PART

Overview

Introducon | 2

CHAPTER 1

Introducon

IN THIS CHAPTER

JSA Appliance Models | 2

JSA Appliance Hardware Features | 3

JSA Appliance Models

Juniper Secure Analycs (JSA) appliances are designed to respond to the right threats at the right me

through eecve analysis of networks, events, and audit log les. JSA has the ability to idenfy

environmental anomalies in the network, an aack path, and the source of a threat. JSA provides

network remediaon for threat responses across all security products.

The JSA appliances use two drivers, Security Informaon Management (SIM) and Security Event

Management (SEM), for security analysis of external and internal threats. SIM provides reporng and

analysis of data from host systems, applicaons, and security devices to support security policy

compliance management, internal threat management, and regulatory compliance iniaves. SEM

improves security incident response capabilies by processing data from security devices and network

devices. It helps network administrators to provide eecve responses to external and internal threats.

Table 1 on page 2 lists the Juniper Secure Analycs (JSA) appliance models.

Table 1: JSA Appliance Models

Model Device Type Memory Storage Conguraon

JSA3800 Low memory 64 GB Six 900 GB HDDs, RAID10

For more informaon on

JSA3800, see JSA3800

Hardware Guide

2

Table 1: JSA Appliance Models

(Connued)

Model Device Type Memory Storage Conguraon

JSA5800 High memory 128 GB Eight 900 GB HDDs, RAID10

For more informaon on

JSA5800, see JSA5800

Hardware Guide

JSA7500 High memory 128 GB 28 drives of 900 GB HDDs,

RAID10

JSA7800 High memory 128 GB Sixteen 2 TB HDDs, RAID6

For more informaon on

JSA7800, see JSA7800

Hardware Guide.

RELATED DOCUMENTATION

JSA Appliance Hardware Features | 3

Addional Hardware Requirements | 15

JSA Appliance Hardware Features

The Juniper Secure Analycs (JSA) appliance provides the following features:

• Monitor ulity for power supply unit (PSU) and fans

• Add setup logs automacally

• Support high availability (HA)

• Hot-swappable hard disk supporng RAID

•Automac RAID rebuild on HDD swap

3

• Support hot-swappable dual-AC or dual-DC power supplies with a redundant conguraon in the

chassis

RELATED DOCUMENTATION

Browser Support | 73

General Safety Guidelines and Warnings | 20

Required Tools and Parts for Installing the JSA Appliance | 69

4

2

PART

Components

Hardware Components and Specicaons | 6

JSA7500 | 10

CHAPTER 2

Hardware Components and Specicaons

IN THIS CHAPTER

Hardware Specicaons | 6

JSA Transceiver Interface | 8

Hardware Specicaons

Table 2 on page 6 lists the hardware specicaons for the JSA7500 appliance.

Table 2: Hardware Specicaons

Specicaon JSA7500

Dimensions (D x W x H) 597.5 mm x 438.4 mm x 88 mm (23.52-in. x 17.26-in. x 3.5-in.)

Weight 60 lb

Warranty 1 year HW, 90 days SW

Fans 8 x 80 mm redundant hot swap

Panel Display • LEDs: Power, HW Alert

• HD Acvity and Fail LED on drive tray

Rack mountable Front-and-rear or mid-mount, ush or recessed mounng

6

Table 2: Hardware Specicaons

(Connued)

Specicaon JSA7500

Ports 1 console, 4x RJ-45 10/100/1000

Power

AC Power Supply

• 100 V to 240 V, 50 - 60 Hz, 750 W hot-swap module

•Eciency

• Typical 85% at 115 V, 12 V / 62.5 A 5 Vsb / 3.0 A

DC Power Supply

• 750 W hot-swap module

• -40 V to -60 V

• 20.0 A

(Unit ships with dual DC supplies)

Environmental specicaons

Temperature operang 5° C – 40° C

41° F – 104° F

Temperature storage -40° C – 70° C

-40° F – 158° F

Humidity operang 8% - 90% non-condensing

Humidity storage 5% - 95% non-condensing

Altude operang 10000  max.

7

Table 2: Hardware Specicaons

(Connued)

Specicaon JSA7500

Altude storage 40000  max.

RELATED DOCUMENTATION

JSA Appliance Models | 2

JSA Appliance Hardware Features | 3

Addional Hardware Requirements | 15

JSA Transceiver Interface

Table 3 on page 8 lists the dierent types of transceiver interfaces available on the various types of

Juniper Secure Analycs (JSA) appliances.

Table 3: JSA Appliance Transceiver Interface Types

Transceiver Type Card Model Model Descripon

SFP+ • UNIV-SFPP-DUAL-SR

• UNIV-SFPP-DUAL-LR

JSA7500 • UNIV-SFPP-DUAL-SR

Dual Rate 10GBASE-LR/

1000BASE-LX

• UNIV-SFPP-DUAL-LR

Dual Rate 10GBASE-SR/

1000BASE-SX

IOC UNIV-10GE-2SFPP-H JSA7500 Network adapter with support

for dual rate SFP+ opcs for

JSA7500

8

Table 3: JSA Appliance Transceiver Interface Types

(Connued)

Transceiver Type Card Model Model Descripon

UNIV-10GE-2SFPP JSA7500 Network adapter with support

for dual rate SFP+ opcs

RELATED DOCUMENTATION

JSA Appliance Models | 2

Installing the CNA Module on the JSA7500 Appliance | 94

Hardware Specicaons | 6

9

CHAPTER 3

JSA7500

IN THIS CHAPTER

JSA7500 Front Panel | 10

JSA7500 Back Panel | 12

JSA7500 Front Panel

The JSA7500 appliance has a 2-U, rack-mountable chassis redundant DC power supplies (oponal AC

power supplies), twenty-eight hot-swappable hard drives in a RAID10 array, 128 GB of memory, and

four Gigabit Ethernet interfaces.

Figure 1 on page 10 shows the front panel components of the JSA7500 appliance.

Figure 1: JSA7500 Front Panel

Table 4 on page 11 lists the front panel components of the JSA7500 appliance.

10

Table 4: JSA7500 Front Panel Components

Callout Component Descripon

1 ESD wrist strap grounding jack Connect the equipment end of your

ESD grounding strap to the ESD

point on the chassis to minimize the

potenal for electrostac discharge

(ESD) damage.

2 Hard drives 24 drives of 900 GB HDDs (Drive0 -

Drive23).

3 Chassis LEDs Power (green)—Indicates that the

appliance is powered on.

4 Hard disk acvity (yellow)—Indicates

the hard disk is in use (wring or

reading data).

5 Fault (red)—Indicates that a fan,

power supply, or temperature alarm

has occurred.

6 Front bezel with air lter Provides opmum cooling.

RELATED DOCUMENTATION

JSA Appliance Models | 2

JSA7500 Back Panel | 12

11

JSA7500 Back Panel

Figure 2 on page 12 shows the back panel components of the JSA7500 appliance.

Figure 2: JSA7500 Back Panel

Table 5 on page 12 lists the back panel components of the JSA7500 appliance.

Table 5: JSA7500 Back Panel Components

Callout Component Descripon

1 Hard drive 4 drives of 900 GB HDDs:

• Drive24 (top le) and Drive25

(boom le)

• Drive26 (top) and Drive27 (boom)

2 Network port 0 RJ-45 Ethernet 10/100/1000 ports

3 Network port 1 RJ-45 Ethernet 10/100/1000 ports

4 Network port 2 RJ-45 Ethernet 10/100/1000 ports

12

Table 5: JSA7500 Back Panel Components

(Connued)

Callout Component Descripon

5 IOC expansion slots Two slots for addional IOC expansion

with 2-port dual-rate 1GbE/10GbE

SFP+

6 Network port 3 RJ-45 Ethernet 10/100/1000 ports

7 USB ports Accepts a USB storage device

8 DB-9 Serial Console port one serial console port

9 Power switch Provides power to all components

10 Redundant power supply Provides power to all components

11 Redundant power supply Provides power to all components

RELATED DOCUMENTATION

JSA Appliance Models | 2

JSA7500 Front Panel | 10

13

Page is loading ...

Juniper JSA7500 Hardware Guide

Juniper JSA7500 Hardware Guide

Related papers

Other documents