MCW-S/B Instr.
0721PH
MCW-S/B
Desk Mount Stand
Use with:
AT, AX, DB, GT, IE, IXG, JF, JO, JP, KB, MC, and TD Systems
-INSTRUCTIONS-
The MCW-S/B is a stand that will allow you to locate an Aiphone intercom station on a desk or tabletop.
This stand has two angle settings, enabling the user to select the optimal mounting angle for the
intercom station (45° or 60°).
MOUNTING:
1. Use the supplied mounting hardware to attach the intercom’s mounting bracket to the MCW-S/B.
2. Set the angle of the MCW-S/B by adjusting the rear support arm for either a 45° or 60° angle.
3. Lock the rear support arm into position to prevent the MCW-S/B from collapsing.
4. Feed the wires through the back of the MCW-S/B and attach to the intercom unit.
5. Mount the station onto the mounting bracket.
Compatible Stations:
Video inside stations for AX, GT, IXG, JF, JO, JP, and KB.
Audio inside stations for AT, DB, IE, KB, MC, and TD.
45° Angle 60° Angle
Dimensions:
Faceplate: 4½” W x 6½” H
Base: 6½” W x 8” D
Height at 45°: 5¹⁄”
Height at 60°: 5³⁄”
Contents:
Desk Stand
Set of 4 each ³⁄” screws, washers and nuts
MCW-S/B
0721
MCW-S/B
Aiphone Corporation
www.aiphone.com
(800) 692-0200
