L.L.Bean MISSION UNDER WINDOW BOOKCASE Assembly Instructions

MISSION UNDER WINDOW BOOKCASE

Thank you for purchasing our Mission Under Window Bookcase. Assembly of this product

requires a Phillips screwdriver and a hammer.

DH29070201

STEP 1

Read through these instructions thoroughly. We

have found this to be of great value when first

assembling this product.

STEP 2

Remove all parts and hardware from packing

material. Place wooden parts on non-abrasive

surface (like carpet or carton) to prevent damage to

finish. Identify all parts using diagram at right.

PARTS

(2) Side Assembly (A)

(1) Fixed Shelf (B)

Top Shelf (C)

(1) Adjustable Shelf (D)

STEP 3

Identify and count hardware using diagram at right.

Assembly of this product requires a Phillips

screwdriver and a hammer. We have found it

helpful to have a second person assist with

assembly.

STEP 4

Lay one side assembly (A) on edge and attach fixed

shelf (B) to bottom end with two 1 1/4" screws.

Thread screws into countersunk holes in side

assembly and into edge of shelf.

STEP 5

Attach top shelf to side assembly with two 1 1/4"

screws. Thread screws into predrilled holes in side

assembly and into pre drilled holes in cleats on

underside of top shelf.

DH29070201