Page is loading ...
User Manual
Tablet Powerbank
Thank you for purchasing our product. For optimum performance
and safety, please read this instruction carefully before operating
the product.
2
1. Parts and functions
2. Specifications
Capacity: 3.7V/12000mAh
Micro USB input: 1000mAh/5V
Dual USB Output: 2.1A/5V for Tablets/iPad/Smart phones
1A/5V for Smart phones
Charging bt computer or AC-adapter: Approximately 13.5 hours
Dimensions: 102x73x23mm
Weight: 250g
3. Power switch indication
Power on:
Slide the sliding power switch to expose the USB port, the powerbank is
now powered on. And the power LED will be turne don to display the power status.
3
Power off:
Slide the sliding power switch to cover the USB port an expose the
microUSB port, the powerbank is now powered off. And the power LED will be off at the same
time.
Remark: After the powerbank is powered on, if the USB port keep no-discharging over 2 minutes
(e.g. the powerbank does not connect with any smart phone/tablet or other digital devices, or if
the connected device is fully charged), the powerbank till automatically be powered off to save
anergy and the LED will be off as well. Then the output will stop working unless you power on the
powerbank again by sliding the switch.
4. How to use
Charging your Tablet Powerbank:
Charge the powerbank via the supplied USB to Micro USB connector. The blue charging
LED will appear on the dusplay.
When all 3 charging indicators are glowing solid blue, charging is complete.
Charging USB plug device from Tabletl Powerbank:
Power on the powerbank by sliding the power switch to expose the USB port.
Use your device’s original USB charging cable to connect to the powerbank’s 1A or 2.1A
USB output. The powerbank’s charging LED will be on, and your USB plug device should
also indicate that it is being charged.
When your USB plug device is fully charged, disconnect the powerbank.
Power off the powerbank by sliding the power switch. If you do not power it off, it will be
automatically powered off after 2 minutes to save energy.
Remark: If the powerbank’s 3 LEDs are all off after you power it on, it means the powerbank
is out of power and needs to be recharged.
Power Status LED (when powerbank is charging device):
3 LEDs on: 70% ̴ 100%
2 LEDs on: 40% ̴ 70%
1 LED on: below 40%
LED indication while being charged:
4
3 LEDs on: 100% charged
2 LEDs on: 70% charged
1 LED on: 35% charged
Remark: When the powerbank is out of power, the last LED will keep flashing for 5 times and the
off, to remind you it is out of power and needs to be recharged.
Important notes:
Please fully charge the powerbank before you use it for the first time.
Please do not charge the powerbank while it is being connected to microUSB mobile
devices.
When charging the powerbank, use only the original cable, otherwise it might be
damaged.
Do not drop, knock, dissassemble or attempt to repair the powerbank by yourself.
Do not immerse the powerbank in water or make it wet.
Do not expose the powerbank to a heat source like fire or heater.
Keep out of reach of children.
Do not use in the presence of flammable gas.
Importør
iiglo.com
Østre Kullerød 4, N-3241 Sandefjord, Norway
www.iiglo.com
/
