McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User manual

E/OS SNMP Support Manual

P/N 620-000131-630

REV A

E/OS SNMP Support Manual

ii

Record of Revisions and Updates

Printed June 2005

Ninth Edition

McDATA, the McDATA logo, McDATA Eclipse, Fabricenter, HotCAT, Intrepid, Multi-Capable Storage

Network Solutions, Networking the World's Business Data, nScale, nView, OPENready, SANavigator,

SANtegrity, SANvergence, SecureConnect and Sphereon are trademarks or registered trademarks of

McDATA Corporation. OEM and Reseller logos are the property of such parties and are reprinted with limited

use permission. All other trademarks are the property of their respective companies. All specifications subject

to change.

No part of this publication may be reproduced or distributed in any form or by any means, or stored in a

database or retrieval system, without the prior written consent of McDATA Corporation.

The information contained in this document is subject to change without notice. McDATA Corporation

assumes no responsibility for any errors that may appear.

All computer software programs, including but not limited to microcode, described in this document are

furnished under a license, and may be used or copied only in accordance with the terms of such license.

McDATA either owns or has the right to license the computer software programs described in this document.

McDATA Corporation retains all rights, title and interest in the computer software programs.

McDATA Corporation makes no warranties, expressed or implied, by operation of law or otherwise, relating

to this document, the products or the computer software programs described herein. McDATA

CORPORATION DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR

A PARTICULAR PURPOSE. In no event shall McDATA Corporation be liable for (a) incidental, indirect,

special, or consequential damages or (b) any damages whatsoever resulting from the loss of use, data or

profits, arising out of this document, even if advised of the possibility of such damages.

Revision Date Description

620-000131-000 6/2001 Initial release of Manual

620-000131-100 11/2001 Update to manual

620-000131-200 5/2002 Update to manual

620-000131-300 9/2002 Update to support EFCM 6.1and 6.2

620-000131-400 10/2002 Update to support EFCM 6.1, 6.2, & 6.3

620-000131-500 2/2003 Update to support E/OS 5.1 and EFCM 7.0

620-000131-600 8/2003 Update to support E/OS 5.2 and EFCM 7.2

620-000131-610 11/2003 Update to support E/OS 6.0

620-000131-620 2/2005 Update to support E/OS 7.0

620-000131-630 6/2005 Update to support E/OS 8.0

Contents

iii

Preface............................................................................................................................ vii

Chapter 1 Introduction to SNMP

Network Management using SNMP..............................................1-1

SNMP Features ..........................................................................1-2

SNMP Commands.....................................................................1-2

Why Variables exist In a Managed Device ............................1-3

How SNMP Changes Variables in a Managed Device ........1-3

SNMPv3 ......................................................................................1-4

SNMP Community co-existence..............................................1-5

Security Features........................................................................1-5

E/OS SNMPv3 Configuration .................................................1-6

Standard MIBs............................................................................1-7

Private Enterprise MIBs............................................................1-8

Traps and Their Purpose ..........................................................1-9

Chapter 2 McDATA SNMP Support

Overview............................................................................................2-1

E/OS Trap Overview .......................................................................2-2

E/OS Trap summary table.......................................................2-3

MIB Definitions: MIB-II..................................................................2-20

System Group...........................................................................2-20

Interfaces Group .....................................................................2-22

Address Translation Group ..................................................2-29

IP Group...................................................................................2-30

IP Routing group ....................................................................2-36

ICMP Group ............................................................................2-42

TCP Group...............................................................................2-47

Contents

E/OS SNMP Support Manual

iv

Contents

UDP Group..............................................................................2-52

SNMP Group...........................................................................2-53

Fabric Element Management MIB................................................2-60

Predefined types......................................................................2-60

Fibre Alliance MIB..........................................................................2-96

Type definitions.......................................................................2-96

Trap Types..............................................................................2-146

Appendix A Fibre Alliance MIB

FA MIB ..............................................................................................A-1

Textual conventions for this MIB...........................................A-4

Connectivity unit group ..........................................................A-6

Event group.............................................................................A-34

SNMP trap registration group..............................................A-65

Related traps............................................................................A-68

Conformance definitions.......................................................A-69

Conformance units .................................................................A-70

Appendix B FC Management MIB

FCMGMT-MIB Definitions ............................................................ B-1

Connectivity unit group ................................................................. B-4

Sensor table.............................................................................. B-19

Port Table........................................................................................ B-23

Event Group ................................................................................... B-35

Link Table ................................................................................ B-39

Port Statistics........................................................................... B-46

FC Simple Name Server Table.............................................. B-64

SNMP Trap Registration Group.................................................. B-69

Related Traps.................................................................................. B-73

Appendix C McDATA Private Enterprise MIB

FCEOS.MIB.......................................................................................C-1

Textual conventions for this MIB...........................................C-3

Enterprise Specific Object Identifiers.....................................C-5

Fibre Channel product lines....................................................C-5

Groups in FCEOS MIB.............................................................C-5

System Group............................................................................C-6

Fibre Channel FRU Group ....................................................C-10

Fibre Channel Port Group.....................................................C-13

NPIV Information...................................................................C-39

Fibre Channel Zoning Group ...............................................C-42

v

Contents

Fibre Channel Threshold Alert Group................................ C-47

FCEOS Enterprise-specific Trap Definitions............................. C-51

Appendix D Fabric Element Management MIB

FCFE.MIB ......................................................................................... D-1

Configuration group................................................................ D-6

Operation group..................................................................... D-18

F_Port Fabric Login table...................................................... D-21

FxPort Fabric Login table...................................................... D-25

Error group ............................................................................. D-30

Accounting Groups................................................................ D-35

Class 2 Accounting table....................................................... D-40

Class 3 Accounting Group.................................................... D-43

Capability Group ................................................................... D-46

Appendix E MIB II

Groups in MIB II...............................................................................E-1

System group.............................................................................E-2

Interfaces group ........................................................................E-5

Address Translation group....................................................E-14

IP group....................................................................................E-16

ICMP group .............................................................................E-33

TCP group................................................................................E-40

SNMP group ............................................................................E-50

Appendix F SNMP Framework MIB

SNMP Framework MIB...................................................................F-1

Textual Conventions.................................................................F-2

The snmpEngine Group...........................................................F-7

Appendix G SNMPv3 MIB

SNMPv3 MIB ................................................................................... G-1

User based SM MIB ................................................................. G-1

SNMP View Based Acm MIB Definitions .......................... G-21

MIB views................................................................................ G-32

SNMP-COMMUNITY-MIB .................................................. G-40

Appendix H MIB Objects Listing

MIB Objects Listed by OID ...........................................................H-1

E/OS SNMP Support Manual

vi

Contents

MIB Objects Listed Alphabetically ............................................ H-45

MIB Objects Listed Alphabetically ............................................ H-82

Index ................................................................................................................................i-1

vii

Preface

This publication is part of the documentation suite that supports the

McDATA

®

Sphereon™ 3016 Fabric Switch, Sphereon 3032 Fabric

Switch, Sphereon 3216 Fabric Switch, Sphereon 3232 Fabric Switch,

Sphereon 4300 Fabric Switch, Sphereon 4400 Fabric Switch, Sphereon

4500 Fabric Switch, Sphereon 4700 Fabric Switch, ES-1000 Switch,

ED-5000 Director, Intrepid

®

6064 Director, and Intrepid 6140

Director.

Who Should Use This Manual

Use this publication if you are planning to use SNMP to manage any

of the McDATA switching products listed above.

The publications listed in Related Publications provide considerable

information about both concepts and McDATA products

.Organization of This Manual

This publication is organized as follows:

Chapter 1, Introduction to SNMP, provides an introduction and

overview of Simple Network Management (SNMP) and its

operation.

Chapter 2, McDATA SNMP Support, describes specific

information available through SNMP, especially the Management

Information Bases (MIBs) that are supported and the SNMP traps

generated by the McDATA directors and switches.

Appendix A, Fibre Alliance MIB lists the MIB definitions of Fibre

Alliance MIB.

viii

E/OS SNMP Support Manual

Preface

Appendix B, FC Management MIB, lists the FC Management MIB

3.0.

Appendix C, McDATA Private Enterprise MIB, lists the McDATA

private enterprise MIBs.

Appendix D, Fabric Element Management MIB, lists the SNMP

Framework MIB.

Appendix E, MIB II lists the MIB-II, the RFC1213.mib renamed.

Appendix F, SNMP Framework MIB lists the definitions of

managed objects for the Fabric Element in Fibre Channel

Standard.

Appendix G, SNMPv3 MIB contains the listing of MIB objects by

OID and alphabetically.

Appendix H, MIB Objects Listing lists the definitions of managed

objects for SNMPv3.

An Index is also provided.

Manual Updates

Check the McDATA web site at www.mcdata.com for possible

updates or supplements to this manual.

Related Publications

Other publications that provide additional information about the

products mentioned in this manual are:

• E/OS Command Line Interface User Manual (620-000134-740)

• McDATA Enterprise Fabric Connectivity Manager User Manual

(620-005001)

• McDATA Products in a SAN Environment -Planning Manual

(620-000124)

•Intrepid 6140 and 6064 Directors Element Manager User Manual

(620-000172).

• McDATA Intrepid 6064 Director Installation and Service Manual

(620-000108)

• McDATA Intrepid 6140 Director Installation and Service Manual

(620-000157)

• McDATA Sphereon 3016 and 3216 Fabric Switch Element Manager

User Manual (620-000174)

Preface

ix

Preface

• McDATA Sphereon 3032 and 3232 Fabric Switch Element Manager

User Manual (620-000173)

• McDATA Sphereon 3016 and 3216 Switch Installation and Service

Manual (620-000154)

• McDATA Sphereon 3032 and 3232 Switch Installation and Service

Manual (620-000155)

• McDATA Sphereon 4500 Switch Installation and Service Manual

(620-000159)

• McDATA Sphereon 4500 Fabric Switch Element Manager User

Manual (620-000175)

• McDATA Sphereon 4400 Fabric Switch Installation and Service

Manual (620-000238)

• McDATA Sphereon 4400 Switch Element Manager User Manual

(620-000241)

• EFCM Basic User Manual (620-000240)

• McDATA Sphereon 4700 Fabric Switch Installation and Service

Manual (620-000239)

• McDATA Sphereon 4700 Fabric Switch Element Manager User

Manual (620-000242)

• McDATA Sphereon 4300 Switch Installation and Service Manual

(620-000171)

• SANavigator User Guide (621-000013)

• SNMP Agent User Manual (621-000021)

x

E/OS SNMP Support Manual

Preface

Manual Conventions The following notational conventions are used in this document.

Where to Get Help For technical support, McDATA® end-user customers should call the

phone number located on the service label attached to the front or

rear of the hardware product.

McDATA’s “Best in Class” Solution Center provides a single point of

contact for customers seeking help. The Solution Center will research,

explore, and resolve inquires or service requests regarding McDATA

products and services. The Solution Center is staffed 24 hours a day,

7 days a week, including holidays.

NOTE: To expedite warranty entitlement, please have your product serial

number available.

McDATA Corporation

380 Interlocken Crescent

Broomfield, CO 80021

Phone: (800) 752-4572 or (720) 558-3910

Fax: (720) 558-3851

E-mail: [email protected]

Convention Meaning

Italic Outside book references, names of user interface

windows, panels, buttons, and dialog boxes

Bold Keyboard keys

Click. As in “click the icon on

the navigation control panel.”

Click with the left mouse button on the object to activate a

function.

Right-click. As in “right click

the product icon.”

Click with the right mouse button on the object to activate

a function.

Select. As in “select the log

entry.”

Click once on the object to highlight it.

Preface

xi

Preface

NOTE: Customers who purchased the hardware product from a company

other than McDATA should contact that company’s service representative

for technical support.

Forwarding

Publication

Comments

We sincerely appreciate any comments about this publication. Did

you find this manual easy or difficult to use? Did it lack necessary

information? Were there any errors? Could its organization be

improved?

Please send your comments via e-mail, our home page, or FAX.

Identify the manual, and provide page numbers and details. Thank

you.

Ordering Publications To order a paper copy of this manual, submit a purchase order as

described in Ordering McDATA Documentation Instructions, which is

found on McDATA’s web site, http://www.mcdata.com. To obtain

documentation CD-ROMs, contact your sales representative.

Trademarks The following terms, indicated by a registered trademark symbol (®)

or trademark symbol (™) on first use in this publication, are

trademarks of McDATA Corporation in the United States, other

countries, or both:

Registered Trademarks

Trademarks

Fabricenter

®

E/OS™

HotCAT

®

Eclipse™

Intrepid

®

Fibre Channel Director™

McDATA

®

OPENconnectors™

OPENready

®

SANvergence™

SANavigator

®

Sphereon™

SANtegrity

®

All other trademarked terms, indicated by a registered trademark

symbol (®) or trademark symbol (™) on first use in this publication,

E-mail: [email protected]om

Home Page: http://www.mcdata.com

FAX: Technical Communications Manager

(720) 558-8999

xii

E/OS SNMP Support Manual

Preface

are trademarks of their respective owners in the United States, other

countries, or both.

Introduction to SNMP

1-1

1

Introduction to SNMP

The Simple Network Management Protocol (SNMP) is a complete but

simple mechanism for network management. Network management

is a broad term, including workstation configuration, assignment of

IP addresses, network design, architecture, network security, and

topologies. All this can fall within the scope of a network manager.

Any protocol for managing networks must allow virtually all

network devices and systems to communicate statistics and status

information to network management stations (network managers).

This communication must be independent of the primary network

transmission medium and impose little effect on the efficiency of the

network. Network managers must be able to obtain status

information from managed devices, and make changes in the way the

managed devices handle network traffic. SNMP is one way of

meeting these requirements.

Network Management using SNMP

SNMP is designed on the manager-agent paradigm, with the agent

residing in the managed device. Information is exchanged between

agents (devices on the network being managed) and managers

(devices on the network through which management is done).

Administrators can use SNMP to manage the switch configuration,

faults, performance, accounting, and security from remote SNMP

management stations.

There are many possible transactions between agents and managers.

These transactions vary widely with the different types of devices

1

1-2

E/OS SNMP Support Manual

Introduction to SNMP

that can be managed. In such a case, the list of commands a manager

must be able to issue is overwhelming, and every new manageable

device increases the list. SNMP was created to simplify the task of

managing and meeting the demands of any growing network.

SNMP operates on a simple fetch-store concept. With SNMP, the

available transactions between manager and agent are limited to a

handful. The manager can request information from the agent or

modify variables on the agent. The agent can respond to a request by

sending information, or if enabled to do so, voluntarily notify the

manager of a change of status on the agent (issue a trap).

SNMP Features

SNMP is the only network management protocol that is widely

available from many vendors of TCP/IP networks and

internetworks.

Features of SNMP:

• Simple set of commands for network management.

• Minimal intervention required to manage new devices added to a

network.

• Adequate for many basic network management needs.

• Generalized for application to networks other than TCP/IP, such

as IPX and OSI.

• Considerable versatility for managing many types of devices.

• Same method of management can be used for all networks.

• Addresses security threats through authentication, data

encryption and access control.

SNMP Commands

The main SNMP commands are Get, GetNext, GetResponse, GetBulk,

Inform, Trap and Set.

• Get – The manager uses this command to fetch the value of a

specified variable from the agent.

• GetNext –The manager uses this command to fetch the value of

the variable next to the one specified in the command. This

command is used to retrieve lists and tables of management data.

• GetResponse –An agent sends the requested information to the

manager using this PDU.

1

Network Management using SNMP

1-3

Introduction to SNMP

• Set–A manager can change the variables in the agent by sending

this single command. This command is used to change the

management data.

• GetBulk–This command is used by the manager to retrieve

voluminous data from a large table in the agent.

• Trap–An Agent uses this command to inform the manager about

some unusual events. Refer to Traps and Their Purpose on page 1-9.

• Inform– This command is used by a manager to send alert to

another manager.

Figure 1-1 SNMP Commands and Responses

Why Variables exist

In a Managed

Device

Variables are the means by which devices like switches and directors

keep track of and control their performance apart from providing

access about their performance to network managers. A simple

example of a variable’s use is to set a port offline and turn the port

back on. Some variables just hold values that indicate status (for

example error counts). SNMP allows the network managers to have

access to some of the same variables for network management.

For purposes of the following explanation, an object is a data variable

that represents an attribute of a managed device.

How SNMP Changes

Variables in a

Managed Device

An agent has an interface to the actual object being managed

(Figure 1-2 on page 1-4). The agent understands SNMP and translates

between the manager and the object. Each SNMP element manages

specific objects. Each object has an identifier, OID. Objects may be

Ge

tRes

pons

ePD

U

G

et

R

e

qu

e

st

P

D

U

Get Values

NMS Switch

Se

tRes

pons

ePD

U

S

et

R

e

qu

e

st

P

D

U

Set Values

GetR

espo

nse

PDU

GetNextR

equest PDU

Get Next Values

NMS Switch

Tr

ap P

DU

Send Trap

1

1-4

E/OS SNMP Support Manual

Introduction to SNMP

retrieved and/or modified by the manager, and it is the agent’s job to

return the requested object’s value.

Within the agent is at least one, maybe several, collections of

definitions called Management Information Bases (MIBs). MIB

provides each OID with a readable label and other parameters. The

MIB acts as a dictionary that is used to assemble or interpret the

SNMP messages.

When an agent supports a standard MIB, it agrees to provide and

make available the variables listed in the MIB.

A MIB is an hierarchical tree of groups and variables. Operators at a

network management station enter a command with supported

groups and variables from the MIB.

Figure 1-2 Retrieving or Setting Values Using MIBs

SNMPv3

The E/OS provides additional level of security in the existing SNMP

framework by supporting the SNMPv3, which supplements the

SNMPv2c framework by providing security for messages and explicit

access control. The E/OS also supports SNMP versions 1 and 2,

Variable a

Variable b

Variable c

Variable d

Variable e

Variable f

Variable g

-

Agent

(Use MIB to

identify variable)

Managed

Device

Read status information

with GetRequest command

or

Set a variable to a value

with SetRequest command

NMS

MIB

Actual

Variable (object)

(x)y

1

Network Management using SNMP

1-5

Introduction to SNMP

which authenticate the SNMP requests based on the “community”

string.

ATTENTION!Before enabling SNMPv3, ensure all desired communities are

configured for SNMPv3 access. If existing community strings are not

configured for SNMPv3, then existing SNMP access will be lost.

SNMP Community co-existence

When SNMPv3 is enabled, SNMP Community Coexistence table

provides a way to use the earlier versions such as SNMPv1 and

SNMPv2c. The SNMP Community Coexistence table maps the

community names for SNMPv1 and SNMPv2 to a Security Name.

After retrieving the user name (security name) for the community

string, message processing occurs in the same way as that for

SNMPv3 packets.

Security Features

SNMPv3 provides the User-based Security Model (USM) and View-based

Access Control Model (VACM) features to address authentication, data

encryption, and access control.

User-based Security Model (USM)

The main security threats to an SNMP message are modification of

information, masquerading, disclosure, and message stream

modification. The User-based Security Model (USM) protects

SNMPv3 packets from these threats by utilizing the concept of

multiple users where each user has to specify a key for authentication

and privacy. The USM deals with authenticating/encrypting/

decrypting SNMP packets. The authentication protocols supported

are HMAC-MD5-96 and HMAC-SHA-96. The privacy protocol

supported is CBC-DES.

The SNMP agent recognizes up to 32 user names that can have one of

the following security levels:

• No authentication and no privacy (none)

• Authentication only (auth only)

• Authentication and privacy (authpriv)

1

1-6

E/OS SNMP Support Manual

Introduction to SNMP

Authentication can be used to restrict communication between two

authorized entities. Users cannot save messages and replay them

with altered content. Only authorized users can change

configurations of network devices.

View-based Access Control Model (VACM)

The View-based Access Control Model defines a set of services that

an application can use for checking access rights. It determines the

access rights of a group.

A group defines the access rights afforded to all the security names

(user names) which belong to that group. The combination of a

security model and a security name maps to at most one group

identified by a group name. The access rights that can be given to a

group are read-view, write-view and notify-view.

E/OS SNMPv3 Configuration

The security and access features for SNMPV3 provided by the

User-based Security Model (USM) and View-based Access Control

Model (VACM) require using multiple tables: User Table, Access

Table, Security-to-Group Table, and Target Table. The following

sections describe how SNMPv3 has been implemented in the E/OS.

USM Message Processing

The following steps describe how SNMPv3 messages are processed

in the User-based Security Model:

1. User table contains information such as user name, authentication

protocol, authentication key, privacy protocol, and encryption

key. Based on the user name field in the received packet, the

SNMP engine finds out the user entry from the table.

2. Flags are checked to see if authentication or security is needed.

3. If authentication is needed, the hash value is calculated using the

authentication protocol and authentication key, and matched

against the header.

1

Network Management using SNMP

1-7

Introduction to SNMP

4. If privacy is needed, the message is decrypted using the private

key; it is encrypted again before sending back.

NOTE: The authentication/privacy key (password) configured for an

SNMPv3 user on a switch is not localized. Therefore, the

authentication/privacy key configured in the SNMP management

application must be configured as a non-localized authentication/privacy

key in ASCII format. For more information on localization, refer to

http://www.ietf.org/rfc/rfc3414.txt?number=3414.

VACM Message Access Control

The following steps describe how SNMPv3 messages are processed

in the View-based Access Control Model:

1. A security name and security model pair are mapped to a group

name string. On receiving the packet, the agent checks for the

user name and security model and extracts the group name from

the security-to-group name table.

2. The vacmContextTable is used to store all locally available contexts.

The contextName found in the scoped PDU is then searched in

this table. If the search is successful, it gives an index of the

context in the table. Otherwise a noSuchContext error is returned.

3. The vacmAccessTable is used get the view name of the MIB to be

referenced. This decision is based on the group name, context

name, security model and security level. The security model and

security level are derived from the received packet.

4. The derived view name is used to index into the

vacmFamilyTreeTable for access checking. The OID of a managed

object is then checked against this MIB view. If the OID is part of

the current MIB view, then access is granted; otherwise

errorIndication (notInView) is returned.

Currently, you can configure SNMPv3 only through the command

line interface (CLI) of the switch. Refer to the E/OS Command Line

Interface User Manual for detailed information about the commands

and their respective parameters.

Standard MIBs

Standard MIBs are those created and approved by the Internet

Engineering Task Force (IETF) and other Internet standards bodies

and are readily available for use with SNMP network management

stations. The standard MIBs provide a baseline of common

1

1-8

E/OS SNMP Support Manual

Introduction to SNMP

operations across a wide variety of managed devices. Chapter 2

describes the standard MIBs used by the various McDATA products.

Standard MIBs supported by McDATA products are:

• MIB-II (Internet MIB) as described in RFC1213: supported by all

switches and directors.

• User-based Security Model (USM) as described in RFC2574

• View-based Access Control Model (VACM) as described in

RFC2575

• SNMP Community MIB as described in RFC2576

• Fibre Alliance (FCMGMT) MIB, version 3.0: supported by EFC

Server, Sphereon™ 3016 Fabric Switch, Sphereon 3032 Fabric

Switch, Sphereon 3216 Fabric Switch, Sphereon 3232 Fabric

Switch, Sphereon 4300 Fabric Switch, Sphereon 4400 Fabric

Switch, Sphereon 4500 Fabric Switch, Sphereon 4700 Fabric

Switch, Intrepid

®

6064 Director, and Intrepid 6140 Director.

• Fibre Alliance (FCMGMT) MIB, version 3.1: supported by EFC

Server, Sphereon 3016 Fabric Switch, Sphereon 3032 Fabric

Switch, Sphereon 3216 Fabric Switch, Sphereon 3232 Fabric

Switch, Sphereon 4300 Fabric Switch, Sphereon 4400 Fabric

Switch, Sphereon 4500 Fabric Switch, Sphereon 4700 Fabric

Switch, Intrepid 6064 Director, and Intrepid 6140 Director.

• Fibre Channel Fabric Element (FCFE), version 1.10: supported by

all switches and directors.

Private Enterprise

MIBs

Private MIBs are those provided by the manufacturer of the managed

devices to allow management of device-specific items. Chapter 2

describes the McDATA private MIBs in more detail.

The McDATA private enterprise MIBs are:

• es1000 MIB, used by the ES-1000 switch

• ed5000 MIB, used by the ED-5000 director

• fcEos MIB, used by the supported by Sphereon 4500 switch,

Sphereon 4300 switch, Sphereon 3016 switch, Sphereon 3216

switch, Sphereon 3232 switch, Sphereon 4400 switch, Sphereon

4700 switch, Intrepid 6064 Director, and Intrepid 6140 Director

(updated to support zoning, port binding, threshold alerts, and

open trunking).

Page is loading ...

McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User manual

This manual is also suitable for

McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User manual

Related papers

Other documents