Dell SE2219H/SE2219HX User guide

Category
TVs & monitors
Type
User guide

Dell SE2219H/SE2219HX is a monitor ideal for everyday use, featuring a 21.5-inch screen with a resolution of 1920 x 1080 and wide viewing angles for comfortable viewing. Its LED backlight ensures energy efficiency, while the tilt function allows you to adjust the screen angle to your liking. The monitor features HDMI and VGA ports for easy connectivity to your computer and other devices, and its sleek design complements any workspace.

Dell SE2219H/SE2219HX is a monitor ideal for everyday use, featuring a 21.5-inch screen with a resolution of 1920 x 1080 and wide viewing angles for comfortable viewing. Its LED backlight ensures energy efficiency, while the tilt function allows you to adjust the screen angle to your liking. The monitor features HDMI and VGA ports for easy connectivity to your computer and other devices, and its sleek design complements any workspace.

Dell SE2219H/SE2219HX
User’s Guide
Monitor Model: SE2219H/SE2219HX
Regulatory Model: SE2219Hf
Notes, Cautions and Warnings
NOTE: A NOTE indicates important information that helps you make better
use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of
data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Copyright © 2018 - 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other
trademarks are of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
2020 - 12
Rev. A03
Contents 3
Contents
About your monitor ...........................................5
Package contents ..................................................... 5
Product features ....................................................... 6
Identifying features and controls ................................ 7
Monitor specifications ...............................................10
Pin assignments .......................................................15
Plug and play capability .............................................17
LCD monitor quality and pixel policy ...........................17
Maintenance guidelines .............................................17
Setting up the monitor .....................................18
Connecting the stand ................................................18
Connecting your monitor .......................................... 20
Organizing cables .....................................................21
Removing the stand ..................................................21
Operating your monitor ....................................23
Turning on the monitor ............................................. 23
Using the front panel controls ................................... 23
Using the On-Screen Display (OSD) menu .................. 25
Setting up display resolution on your monitor ............. 40
Using tilt ................................................................. 42
4 Contents
Troubleshooting ...............................................43
Self-test ................................................................. 43
Built-in diagnostics .................................................. 45
Common problems ................................................... 46
Product-specific problems ........................................ 48
Appendix .........................................................49
FCC Notices (U.S. Only) and Other Regulatory
Information ............................................................. 49
Contact Dell ............................................................ 49
EU product database for energy label and product
information sheet .................................................... 49
About your monitor 5
About your monitor
Package contents
Your monitor ships with the components indicated in the table. Ensure that you have received
all the components and see Contact Dell if anything is missing.
NOTE: Some items may be optional and may not ship with your monitor.
Some features may not be available in certain countries.
NOTE: To set up with any other stand, see the documentation that shipped
with the stand.
Display
Stand riser
Stand base
Power cable (varies by country)
VGA cable (SE2219H)
6 About your monitor
HDMI cable (SE2219HX)
Quick Start Guide
Safety and Regulatory Information
Product features
The Dell SE2219H/SE2219HX at panel display has an active matrix, Thin-Film Transistor
(TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight.
The monitor features include:
SE2219H/SE2219HX: 54.61 cm (21.5 in.) diagonal viewable area display (measured
diagonally). 1920 x 1080 resolution, with full-screen support for lower resolutions.
Wide viewing angles of 178 degrees in vertical and horizontal directions.
High dynamic contrast ratio (8,000,000:1).
HDMI connectivity makes it simple and easy to connect with legacy and new systems.
Plug and play capable if supported by your computer.
On-Screen Display (OSD) adjustments is to easy setup and screen optimization.
≤ 0.3 W in Standby Mode.
Optimize eye comfort with a ficker-free screen.
Possible long-term effects if blue light emission from the monitor may cause damage
to the eyes, including eye fatigue or digital eye strain. ComfortView feature is
designed to reduce the amount of blue light emitted from the monitor to help optimize
eye comfort.
Security-lock slot.
Arsenic-free glass and mercury-free panel.
BFR/PVC-Reduced (the circuit boards inside your monitor are made using BFR/PVC-
free laminates).
RoHS Compliant.
About your monitor 7
Identifying features and controls
Front view
2
1
Label Description Use
1
Function buttons To access the OSD menu and change the
settings if required. For more information,
see Using the front panel controls.
2
Power On/Off button
(with LED indicator)
To turn the monitor On or Off.
Solid white light indicates that the
monitor is turned on and functioning
normally. Blinking white light indicates
that the monitor is in Standby Mode.
8 About your monitor
Back view
With monitor stand
Without monitor stand
Label Description Use
1
Security-lock slot To secure the monitor using a security
lock (purchased separately).
2
Regulatory label, barcode, serial
number, and Service Tag label
List of regulatory approvals. See this
label if you need to contact Dell for
technical support. The Service Tag is
a unique alphanumeric identifier that
enables Dell service technicians to
identify the hardware components in
your computer and access warranty
information.
3
Regulatory information (engraved) List of regulatory approvals.
4
Cable-management slot To organize the cables.
5
Stand release button Release stand from monitor.
Side view
About your monitor 9
Bottom view, without monitor stand
SE2219H/SE2219HX
Label Description Use
1
Power port To connect the monitor power cable.
2
HDMI port
For connecting the monitor to your computer using
HDMI cable.
3
VGA port
For connecting the monitor to your computer using
VGA cable.
10 About your monitor
Monitor specifications
Description Values
Screen type Active matrix-TFT LCD
Panel type In-Plane Switching
Viewable area
Diagonal 546.10 mm (21.50 in.)
Active area:
Horizontal
Vertical
Area
476.06 mm (18.74 in.)
267.79 mm (10.54 in.)
1274.84 cm
2
(197.52 in.
2
)
Pixel pitch 0.24795 mm
Pixel per inch (PPI) 102
Viewing angle:
Horizontal
Vertical
178° (typical)
178° (typical)
Brightness 250 cd/m
2
(typical)
Contrast ratio 1,000 to 1 (typical)
8,000,000 to 1 (Dynamic Contrast)
Faceplate coating Anti-glare with 3H hardness
Backlight LED light bar system
Response time (Gray to Gray):
Normal mode
Fast mode
8 ms
5 ms
Color depth 16.7 million colors
Color gamut CIE 1931 (72%)
Dell display manager
compatibility
Yes
Connectivity One VGA port and one HDMI 1.4 (HDCP 1.4) port with
SE2219H/SE2219HX monitors.
Bezel width (edge of monitor
to active area)
- Top: 6.4 mm (0.25 in.)
- Left/Right: 6.4 mm (0.25 in.)
- Bottom: 20.5 mm (0.81 in.)
Security Security-lock slot for cable lock (optional purchase)
Tilt angle -5° to 21°
About your monitor 11
Resolution specifications
Description Values
Horizontal scan range
30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz (automatic)
Maximum preset resolution 1920 x 1080 at 60 Hz
Preset display modes
SE2219H/SE2219HX
Display mode Horizontal
frequency
(kHz)
Vertical
frequency
(Hz)
Pixel clock
(MHz)
Sync polarity
(Horizontal/
Vertical)
VESA, 720 x 400 31.5 70.1 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x1024 64.0 60.0 108.0 +/+
VESA, 1280 x1024 80.0 75.0 135.0 +/+
VESA, 1600 x 900 60.0 60.0 108.0 +/+
VESA, 1920 x1080 67.5 60.0 148.5 +/+
12 About your monitor
Electrical specifications
Description
Values
Video input signals Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
HDMI 1.4 (HDCP 1.4), 600 mV for each differential line,
100 Ω input impedance per differential pair
Synchronization
input signals
Separate horizontal and vertical synchronizations,
polarity-free TTL level, SOG (Composite SYNC on green)
AC input voltage/
frequency/current
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.5 A
Inrush current 30 A (120 V AC Input)
60 A (240 V AC Input)
Power Consumption 0.2 W (Off Mode)
1
0.3 W (Standby Mode)
1
12.9 W (On Mode)
1
20 W (Max)
2
15.95 W (P
on
)
3
50.59 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
P
on
: Power consumption of On Mode measured with reference to Energy Star test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
peripherals you ordered, and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy
or completeness is expressed or implied.
About your monitor 13
Physical characteristics
Description Values
Signal cable type:
Analog
Digital
D-Sub (VGA), 15 pins;
HDMI, 19 pins
Dimensions (with stand):
Height 385.20 mm (15.17 in.)
Width 488.90 mm (19.25 in.)
Depth 152.80 mm (6.02 in.)
Dimensions (without stand):
Height 294.70 mm (11.60 in.)
Width 488.90 mm (19.25 in.)
Depth 46.40 mm (1.83 in.)
Stand dimensions:
Height 171.60 mm (6.76 in.)
Width 249 mm (9.80 in.)
Depth 152.80 mm (6.02 in.)
Weight:
With packaging 4.80 kg (10.58 lb)
With stand assembly and
cables
3.45 kg (7.61 lb)
Without stand assembly and
cables
2.67 kg (5.89 lb)
Weight of stand assembly 0.52 kg (1.15 lb)
14 About your monitor
Environmental characteristics
Description Values
Temperature:
Operating 0°C to 40°C (32°F to 104°F)
Non-operating:
Storage
Shipping
-20°C to 60°C (-4°F to 140°F)
-20°C to 60°C (-4°F to 140°F)
Humidity:
Operating 10% to 80% (non-condensing)
Non-operating:
Storage
Shipping
5% to 90% (non-condensing)
5% to 90% (non-condensing)
Altitude:
Operating (maximum) 5,000 m (16,400 ft)
Non-operating (maximum) 12,192 m (40,000 ft)
Thermal dissipation 68.2 BTU/hour (maximum)
58.0 BTU/hour (typical)
About your monitor 15
Pin assignments
D-Sub 15-pin connector
Pin Number Signal Assignment
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 DDC +5 V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock
16 About your monitor
Pin assignments
HDMI 19-pin connector
Pin Number Signal Assignment
1 TMDS DATA 2+
2 TMDS DATA 2 SHIELD
3 TMDS DATA 2-
4 TMDS DATA 1+
5 TMDS DATA 1 SHIELD
6 TMDS DATA 1-
7 TMDS DATA 0+
8 TMDS DATA 0 SHIELD
9 TMDS DATA 0-
10 TMDS CLOCK+
11 TMDS CLOCK SHIELD
12 TMDS CLOCK-
13 CEC
14 Reserved (N.C. on device)
15 DDC CLOCK (SCL)
16 DDC DATA (SDA)
17 DDC/CEC Ground
18 +5 V POWER
19 HOT PLUG DETECT
About your monitor 17
Plug and play capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically
provides the computer with its Extended Display Identification Data (EDID) using Display Data
Channel (DDC) protocols so the computer can configure itself and optimize the monitor settings.
Most monitor installations are automatic, you can select different settings as required. For more
information about changing the monitor settings, see Operating your monitor.
LCD monitor quality and pixel policy
During the LCD Monitor manufacturing process, it is normal for one or more pixels to become
fixed in an unchanging state, which are hard to see and do not affect the display quality or
usability. For more information about Dell Monitor Quality and Pixel Policy, see Dell Support site
at https://www.dell.com/support/monitors.
Maintenance guidelines
Cleaning your monitor
WARNING: Before cleaning the monitor, unplug the monitor power cable
from the electrical outlet.
CAUTION: Read and follow the Safety instructions before cleaning the
monitor.
For best practices, follow these instructions while unpacking, cleaning, or handling your
monitor:
To clean your screen, lightly dampen a soft and clean cloth with water. If possible, use a
special screen-cleaning tissue or solution suitable for the anti-static coating. Do not use
benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a lightly-dampened cloth to clean the monitor. Avoid using detergent of any kind as
some detergents leave a milky film on the monitor.
If you notice white powder when you unpack your monitor, wipe it off with a cloth.
Handle your monitor with care as the black-colored monitor may get scratched.
To help maintain the best image quality on your monitor, use a dynamically changing screen
saver and turn off your monitor when not in use.
18 Setting up the monitor
Setting up the monitor
Connecting the stand
NOTE: The stand is not attached when the monitor is shipped from the
factory.
NOTE: The following procedure is applicable for the stand that shipped with
your monitor.
To attach the monitor stand:
1. Connect the stand riser to the stand base, and then tighten the screw on the stand base.
2. Align the stand-riser bracket with the grooves at the back of the monitor.
Setting up the monitor 19
3. Slide the stand assembly until it snaps into place.
20 Setting up the monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety instructions.
NOTE: Do not connect all cables to the computer at the same time. It is
recommended to route the cables through the cable-management slot
before you connect them to the monitor.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect VGA or HDMI cable from your monitor to the computer.
Connecting VGA cable
Connecting HDMI cable
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49

Dell SE2219H/SE2219HX User guide

Category
TVs & monitors
Type
User guide

Dell SE2219H/SE2219HX is a monitor ideal for everyday use, featuring a 21.5-inch screen with a resolution of 1920 x 1080 and wide viewing angles for comfortable viewing. Its LED backlight ensures energy efficiency, while the tilt function allows you to adjust the screen angle to your liking. The monitor features HDMI and VGA ports for easy connectivity to your computer and other devices, and its sleek design complements any workspace.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI