Element RC IFS2 Conversion Kit Owner's manual

  • Hello! I've reviewed the IFS2 Conversion Kit user manual and understand it provides step-by-step instructions for installing the kit, including hardware removal and skid plate installation. I am ready to answer any questions you have about the product or the manual.
  • What should I do with the removed hardware?
    What are the first steps in gate 02?
    How do i install the skid plate?
IFS2 CONVERSION KIT
GATE 01
IFS2 CONVERSION KIT
GATE 02
SUPPLEMENT #112842 - 6 29 2023
NOTE: Remove the hardware shown for both sides.
Pivot the shock and shock mounts to the side.
This will allow you to remove the IFSs stands.
Save the hardware for installation on your chassis.
Offi cially Licensed LT Suspension System by:
NOTE: Remove the #31532 3x8mm BHCS that
connects the servo horn to the servo blank fi rst.
Then remove the LP SHCS and servo blank.
Save the hardware for installation on your chassis.
NOTE: Install the skid plate with two #25202 3x10mm FHCS.
You are now ready to install the IFS to your chassis!
Offi cially Licensed LT Suspension System by:
2
1
x1 x2
x8
31532
3x10mm
BHCS
25202
3x10mm
FHCS
41090
3x10mm
LP SHCS
x1 IFS2 Kit
Servo Blank
/