2. FSR
  3. TM-OT1SM-AC2CH-WHT

FSR TM-OT1SM-AC2CH-WHT Installation guide

  • Hello! I've reviewed the installation instructions for the FSR TM-OT1SM and TM-OT1SM-AC2CH On-Table Bracket. This document outlines the steps for assembling the bracket and mounting it to a table or cabinet, including important notes about screw length and table thickness. I'm ready to answer your questions about the device and the installation process.
  • What is the maximum screw length to secure the T6-LB unit?
    What is the minimum table thickness required for mounting?
    What unit is inserted into the bracket?
FSR
244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207
43324 LIT1642
TM-OT1SM / TM-OT1SM-AC2CH On-Table Bracket Installation Instructions
1. INSERT FSR SERIES T6-LB UNIT (SOLD SEPARATELY
OR INCLUDED WITH TM-OT1SM-AC2CH) INTO BRACKET.
2. SECURE FSR SERIES T6-LB UNIT TO BRACKET
WITH SUPPLIED SCREWS.
LOCATE AND SECURE TO TABLE/CABINET WITH SUPPLIED
MOUNTING SCREWS. MAKE ELECTRICAL CONNECTIONS
AS REQUIRED.
3.
T6-LB UNIT (SOLD SEPARATELY OR
INCLUDED WITH TM-OT1SM-AC2CH)
ON-TABLE
BRACKET/SURFACE
MOUNT ASSEMBLY
INSERTED T6-LB UNIT
SCREWS SUPPLIED
WITH T6-LB UNIT
CAUTION: MAX SCREW
LENGTH 3/8"
TABLE/CABINET
SUPPLIED
MOUNTING
SCREWS
3/4" MIN TABLE
THICKNESS
/