Page is loading ...
Assembly Instructions
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
NEED HELP? GIVE US A CALL!
WE’RE HERE FOR YOU.
TOLL-FREE:
1-877-483-6759
Flower Fountain
Product No. 159-0070-6
downsizing your family home,
For LIVING is a great place to start.
Uncomplicate your life with timeless
style and reliable quality that deliver
s
everyday solutions for your home.
Let us know how our products
work for you. Rate and review at
canadiantire.ca
Table of Contents
Warning!
Important Safety Instructions
Parts List
Exploded Parts
Before You Begin Assembly
tep-by-step Guide
10
Troubleshooting
Caring for Your Item
Technical Data
Warranty
11
11
12
Flower Fountain
Parts List
Item Description Thumbnail Quantity
1Basin/Bowl 1
2Top Flower Section 1
3Pump 1
Flower Fountain
3
Exploded Parts
2
Flower Fountain
3
1
Flower Fountain
Before You Begin Assembly
?
Make Sure All Parts Are Present
Compare all pieces to the parts and hardware lists
Assemble in a Cleared Area
to protect the product as it is being built.
Remove Packaging Materials
Place packing materials back in the box. Do not dispose of packaging materials until
assembly is complete.
Read Each Step Carefully
Make sure you understand each step. you have any questions, ®
customer service cent at
Flower Fountain
Step-by-step Guide
Step 1
Place the bowl (1) on a level surface that cannot be damaged by water.
It needs to be near a properly grounded electrical supply
1
1 1
Flower Fountain
Step-by-step Guide
Step 2
31
Place the pump in the bowl (1) and feed the electrical cord of the pump (3) through the
opening in the bottom.
3
1
3
1
Step-by-step Guide
Step 3
Installing the rubber seal (stopper) over the standpipe.
a. Leave about 8 inches of cord between the pump (3) and the rubber seal.
b. Flip up the collar of the rubber seal and position over the top of the pipe.
c. Carefully flip the collar of the seal downwards over the pipe so it fits snugly.
d. Be sure it sits all the way down on the pipe so there are no air pockets.
Flower Fountain
3
1
2
Step-by-step Guide
Step 4
While holding the top flower section (2), connect the flexible hose
(extending from the bottom) to the top of the pump (3).
Then set down into place over the basin (1).
Flower Fountain
2 1
8
1
2
Fill the basin (1) with water, then plug the pump (3) into a properly grounded outlet.
Loop the wire of the power cable into a drip loop to avoid electric shock
and/or outlet damage.
Step-by-step Guide
Step 5
Flower Fountain
Technical Data
Assembled Dimensions (W x D x H)
Assembled Weight
14.96” x 14.96” x 9.45”
24 cm
(9.45”)
38 cm
(14.96”)
General Information:
Pump model number: YH-707MIX 120 V AC, 60 Hz, 0.10 A
Power cord is 1.83 m (6’) long.
9 kg
19 lb 13.4 oz
0
38 cm x 38 cm x 24 cm
Flower Fountain
1
Troubleshooting
Product Use Troubleshooting
Caring for Your Item
Problem
Need help?
Give us a call! We’re here for you.
If you have questions regarding your product
or require warranty assistance, please call our
customer service helpline.
1-877-483-6759
Before returning your
product to store
1
3
5
2
4
Flower Fountain
12
Warranty
This For L ® product carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace the defective product free of charge within
the stated warranty period, when returned by the original purchaser with proof of purchase.
This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Flower Fountain
159-0070
Imported by Trileaf Distribution
/
