Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Furuno FSV-24 User manual
-
Hitachi 93221816 Datasheet
-
IRWIN 10504139 User manual
-
-
Zurn Corrosive Waste Drainage Z9-SPAN-112X2 Installation guide
-
Metabo 602298610 Datasheet
-
IRWIN 10507681 Datasheet
-
Echo HV-110XG User manual
-
Evolution Power Tools EVOMAG28 User manual
-
Avdel 07287 Intent Of Use