2. REED
  3. 04501

REED 04501 User guide

  • Hello! I've reviewed the product details for Reed Internal Pipe Cutters IC1S and IC3/4S. This document provides information about using both cutters, including their saw tooth blades for plastic and wood, abrasive blades for concrete, and safety instructions. I'm ready to answer any questions you have about these pipe cutters.
  • What type of blade should I use for cutting plastic pipe?
    What type of blade should I use for cutting concrete?
    What safety gear should I use?
    Can I operate the drill in reverse?
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
Internal Pipe Cutter
IC1S ITEM CODE 04501
IC3/4S ITEM CODE 04506
• Saw tooth blade
• Cuts plastic pipe aggressively and cuts wood
for sink lugs.
INSTRUCTIONS:
1. Wear safety glasses or full face protective gear.
2. Insert cutter into drill chuck and tighten securely.
3. DO NOT operate in reverse. Run drill forward only.
4. Insert blade into pipe to be cut off. Squeeze drill
trigger to begin cut. Let blade penetrate completely
through pipe wall. Be sure to hold drill straight at
right-angle to pipe. Rotate 360° to complete cut.
5. Avoid blade contact with concrete or other hard
objects as this will shorten blade life.
6. If excessive wear or damage occurs to the blade,
replace immediately.
Reed Manufacturing Company
1425 West 8th St., Erie, PA 16502 USA
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
Replacement Blades
DESCRIPTION ITEM CODE I.D MINIMUM QTY.
Saw Tooth Blades 04503 1 1/4” 2/pk.
04508 3/4” 2/pk.
Abrasive Blades 04502 1 1/2” 5/pk.
• Abrasive blades preferable for contact with concrete
or other hard surfaces
810-54506
/