2 in 1 Play tent
Key Code: 42888901
Parts list:
- Tent pole x 10
- Pole connector x 8
- Tunnel x1
- Tent x 1
Assembly Instructions:
Step 1: Connect each of the short poles together by pole connector to form two long poles.
Step 2: Unfold the two parts of tunnel and tent.
Tunnel Tent
Step 3: Insert two long poles into the hole of the hem on the tent to form a cross shape, insert the two ends of one pole into the
pocket, insert the two ends of the other pole into the pocket, ties the two poles together with the traps at top.
Step 4: Tie the tunnel together with tent through the two belts, then product assembled successfully.
WARNING!
1. Read instructions carefully before assembly. Tent should be assembled by adults.
2. Keep away from fire. Never allow a naked flame near this product, the fabric will burn if left in continuous contact with flame and
heat sources.
3. For indoor use only.
Care Instruction:
.Wipe clean with damp cloth, do not use abrasive material or solvents.
.Ensure the product is clean and dry thoroughly before storage.
.Always store in a dry place when not in use.
Made in China
/
