•Fitting: Steel with Crystal or Translucent Silver PVC Shade
•Lamptype: Excluding: 9 x G4 bi-pin maximum 10W 12V
•Voltage: 220V - 240V ~ 50Hz
•Protectionagainstelectricshock: Class 1. Requires earthing.
•IPRating: 20. Dust Protected. Protected against solid foreign objects of 12.5mm Ø and
greater. Not protected against water.
•Commercial/domesticuse
•Notsuitableforoutdooruse
•Notforuseinareasexposedtomoisture
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions: (Ø)500mm x (H)310mm
•ChainHeight: 975mm
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Useasoftwhiteclothtoclean.
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Thisluminaireisonlysuitableforxedmounting.
•Notforuseoutdoorsorinareasexposedtomoisture
•Insertmasonryplugsintothemountingsurface.Testtoensurethemountingsurfacewill
holdtheweightofthetting.
1 Insert plastic anchor into mounting surface.
2 Fix the base onto the mounting surface with the self tapping screws.
3 Connect the main supply wires to the terminal block.
Ensure all connections are tight.
4Fixthettingtothebasewithscrews.
5 Attach the crystals
6 Insert lamps.
7 Reconnect power.
CH210-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingtheluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Ensurethatthecorrectlamptypeandwattageistted.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Ifyourmainswiringdiffersinanywayfromdiagramluminaire,consultaqualiedelectrician.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalratingandwattage.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electrical supply.
•Itemmayvaryslightlyfromthepictureonthecarton.