•Fitting: Iron/Plastic/Glass with Mirror Lens
•FittingColour:Chrome
•Lamptype: Including: 1 x 3W SMD LED Strip 230V
•Protectionagainstelectricshock: Class 1. Requires earthing.
•IPRating: 44. Protected from tools and small wires greater than 1 millimeter.
Protected from water spray from any direction.
•Voltage: 220V - 240V ~ 50Hz
• Commercial / domestic use
• Not for use outdoors or in areas exposed to moisture
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions:
W496: (H)200mm x (W)347mm x (D)200mm
W497: (H)200mm x (W)385mm x (D)200mm
Installation
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Beforeattachingtheluminairetothemountingsurface,ensurethatthesurfaceissturdy.
•Secureintoplacewithnutprovided
•Attachtheluminairetothemountingplatetothemountingsurfacebyscrewingintoplaceas
per diagram 1 & 2.
•Connecttheluminairetothepowersupplyasperdiagram3.
•Connectthebodyoftheluminaretothemountingbracketasperdiagram4.
•Securelytotheactuallampbody.
•BeforeunpluggingthelampfromthepowersupplysettheOn/Offswitchto(OFF)position.
•BeforereplacingtheLEDStripLampalwaysunplugtheWalllampfromthepowersupplyand
allow to cool down.
•EnsurethatthecorrectLEDStriplamptypeandwattageistted.
W498/W497-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminairemust
not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Ifyourmainswiringdiffersinanywayfromdiagram,consultaqualiedelectrician.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalratingandwattage.
SPECIFICATIONS
IMPORTANTSAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis
product whilst it is connected to the electrical supply.
•Itemmayvaryslightlyfromthepictureonthecarton.