2. Shark
  3. NV500

Shark NV500 User manual

  • Hello! I've reviewed the Shark Rotator NV500 Quick Start Guide and I'm ready to assist you with any questions you have. This guide covers the assembly process, cleaning modes, maintenance steps like emptying the dust cup, and washing filters. The manual also show key features like upright and lift-away cleaning modes and onboard accessory attachments.
  • How often should I empty the dust cup?
    How often should I wash the foam and felt filters?
    How should I wash the filters?
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A Handle
B Hose
C Wand
D Vacuum Pod
E Motorized Floor Nozzle
F 12” Crevice Tool
G Dusting Brush
WHAT’S INSIDE ATTACH ONBOARD ACCESSORIES
MAINTENANCE
NV500_QSG_REV_Mv3
QUICK START GUIDE
Empty the dust cup after each use.
TIP:
Wash foam and felt
filters every 3 months.
Rinse with water only
and allow to air-dry
completely before
reinstalling. Tap loose
dirt from filters as
needed between
washes.
Note: The foam filter
may discolor over time.
This is normal.
1
(Click)
4
(Click)
2
(Click)
3
(Click)
A
C
D
E
B
F
G
5
(Click)
6
(Click)
2 WAYS TO CLEAN
UPRIGHT
LIFT-AWAY®
For questions or to register your product, visit us online at sharkclean.com
Lift-Away
Release
For additional parts and accessories,
visit sharkaccessories.com
BRUSHROLL
For carpet cleaning
with brushroll
POWER
For cleaning bare floors
or with accessories.
Handle Release
Wand Release
OR
NV500_QSG_REV_Mv3
Suction Control
Slide to MIN for more
maneuverability on carpets.
Slide to MAX for more
suction on bare floors.
To activate brushroll,
step on floor nozzle
and tilt handle back.
©2018 SharkNinja Operating LLC.
Attach any of the
accessories to handle
or wand
/