ERV36

Dacor ERV36, ERV48, PRV30, PRV36, PRV46, Ventilation Hood ERV36 User manual

  • Hello! I am an AI chatbot trained to assist you with the Dacor ERV36 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PLANNING
GUIDE
Web: http://www.dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
30”, 36”, 46”, 48” Wide,
Slim Raised Vent
ERV30, ERV36, ERV48
PRV30, PRV36, PRV46
L65339 rev C
8.1
8 1/2"
(216mm)
6 5/8”
(168mm)
10"
(254mm)
30"
(762mm)
18 13/16”
(478mm)
1 5/8" x 16"
Exhaust duct
Stiffener
3 3/4"
(95mm)
3/4"
(19mm)
Finished floor
1 5/8" x 16"
Exhaust duct
3 1/4" x 10"
Rear
Exhaust duct
1 5/8" x 16"
Exhaust duct
1 5/8" x 16"
Exhaust duct
48", 3 prong
grounded
power cord
Electrical
access panel
Countertop
Motor
cover
6"
(152mm)
3 1/4" x 10"
Exhaust duct
25 7/8"
(657mm)
2 13/16"
(71mm)
Cooktop/Range
Stud wall
Wall board
3/4" (19mm) Max. backsplash thickness
1/4" (6mm) Min. flat area
3"
(76mm)
9/32" (7mm)
1 15/16"
(49mm)
“B”
“A”
ATD2
10"
(254mm)
ERV/PRV OVERALL DIMENSIONS
Model
No. “A” Overall Width “B” Chassis Width
Approximate
Shipping Weight
ERV30 30” (762mm) 27 3/8” (695mm) 48 lbs.
ERV36 36” (914mm) 33 3/8” (848mm) 55 lbs.
ERV48 48” (1219mm) 43 3/8” (1102mm) 69 lbs.
PRV30 30” (762mm) 27 3/8” (695mm) 50 lbs.
PRV36 36” (914mm) 33 3/8” (848mm) 57 lbs.
PRV46 46” (1168mm) 43 3/8” (1102mm) 67 lbs.
NOTES:
1. The Dacor custom transition ATD2 ships with each
ERV and is used for the left, right or down ducting
options.
Rear ducting is designed for 3 1/4” x 10”
rectangular duct.
2. The ATD2 transitions are equivalent to 4 straight
feet.
3.
It may be necessary to route or remove the cabinet
back if the minimum interior depth cannot be met.
2 1/8" (54mm)
2 1/8" (54mm)
3/8"
(10mm)
7/16"
(11mm)
PRV Dimensions
ERV Dimensions
TOP CAP DIMENSIONS
3" (8mm)
Motor Cover
C
L
C
L
6"
(152mm)
3/4" (19mm)
of ERV/PRV
of 1 5/8" x 16" Duct Exhaust
Support Channel
Exhaust
Duct
BOTTOM VIEW
1/1091805
1/1