Sens HL22T User manual

Please read this manual carefully

before using this TV set and keep it

for future reference.

LCD TV & LCD TV/DVD Combo

USER MANUAL

HL15R/HLC15R/ HL15RW/HLC15RW/HL15T/HLC15T /

HL19R/HLC19R / HL19T/HLC19T/ HL19RW/HLC19RW/

HL22R/HLC22R/ HL22T/HLC22T

R

WARNING AND CAUTION

RISK ELECTRIC SHOCK

DO NOT OPEN

CAUTION

!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of

uninsulated dangerous voltage within the product s

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

!

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS

POLARIZED PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE

BLADES CAN BE FULLY INSERTED TO PREVENT

BLADE EXPOSURE.

CAUTION: These servicing instructions are for use by qualified service

personnel only. To reduce the risk of electric shock, do not perform any

servicing other than that contained in the operating instructions unless

you are qualified to do so.

CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. (This item is only for TV with DVD models.)

IMPORTANT SAFETY INSTRUCTIONS

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long

periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

15)The apparatus shall not be exposed to dripping or splashing and that no

objects filled with liquids, such as vases, shall be placed on the apparatus.

16)The mains plug or appliance inlet is used as the disconnect device, remain it

readily operable during the apparatus normal use.

Safety Instructions(for TV with DVD)

PRECAUTIONS

FCC WARNING-This equipment may

generate or use radio frequency

energy.Changes or modifications to this

equipment may cause harmful

interference unless the modifications are

expressly approved in the instruction

manual.The user could lose the authority

to operate this equipment if an

unauthorized change or modification is

made.

CAUTION:USE OF CONTROLS OR

ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE.

LASER SAFETY

This unit employs a laser.Only a qualified

service person should remove the cover

or attempt to service this device,due to

possible eye injury.

CAUTION:VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN AND

INTERLOCK DEFEATED.DO NOT

STARE INTO BEAM.

LOCATION:INSIDE,NEAR THE DECK

MECHANISM.

CONTENT

Safety Notice Items...................................................................................

Front Panel Controls..................................................................................

Connection Options...................................................................................

Remote Control ........................................................................................

Remote Control Key Functions .............................................................

Connection Instructions.............................................................................

Grounding..............................................................................................

External equipment Connections..............................................................

Antenna Connection.............................................................................

VGA Setup.............................................................................................

Component Setup................................................................................

VCR Setup...........................................................................................

.........................................................................................

Cable TV Setup....................................................................................

External Component Source Setup.......................................................

Basic Operating Instructions.......................................................................

Switch On/Off the TV set..........................................................................

Choose the input source..........................................................................

Audio Control..........................................................................................

Mute......................................................................................................

INFO.....................................................................................................

Select the TV Channel You Want.............................................................

Picture Mode...........................................................................................

Mode............................................................................................

Sleep.....................................................................................................

GUIDE...................................................................................................

ARC button.............................................................................................

-button...................................................................................................

CH.LIST button.......................................................................................

FAV.LIST button......................................................................................

Menu Operations.......................................................................................

Video Menu Options...............................................................................

Video Menu Options Continued...............................................................

Audio Menu Options................................................................................

Audio Menu Options Continued................................................................

Channel Menu Options.............................................................................

Channel Menu Options Continued..............................................................

Function Menu Options.............................................................................

Function Menu Options Continued..............................................................

Lock Menu Options ..................................................................................

Lock Menu Options Continued..................................................................

PC Menu Options....................................................................................

PC Menu Options Continued....................................................................

DVD Features..........................................................................................

Special Function Playback.......................................................................

DVD System Setup...................................................................................

Playable Discs.........................................................................................

Disc Protection and DVD Characteristics...................................................

Troubleshooting Guide...............................................................................

Specifications...........................................................................................

Warranty ..................................................................................................

HDMI Input

Audio

1

2

3

4

5

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21-23

23

24-28

28

29

30-31

32

33-36

38

39

40

41

Note: DVD is available only on certain models. Please refer to your original set

for specific details.

Safety Notice Items

Incorrect usage may cause fire or electric shock.

ensure

Please keep this manual for later use;

Please comply strictly with the warning instructions on the machine and

in this book;

Before operation, please make sure that the operating voltage of your unit is

correct;

Do not remove the back cover. If service is needed, please contact an

Authorized service technician.

To prevent this, please do as

required when you are installing, using and cleaning this machine. To

your safety and extend the life-span of LCD-TV, please read the following items

carefully before using:

Please read and understand all the instructions before operation;

Please comply with the instructions provided;

Please do not use additional devices that are not recommended by

manufacturer:

Do not place the unit on unstable, dusty and humid places;

Never put the unit in direct sunlight or near heat sources;

Allow enough space for proper ventilation;

Please keep water away from the LCD-TV . If water comes in contact with the

LCD-TV, disconnect the power cord from the power source, then wipe the set

with a dry soft cloth;

Front Panel Controls

Control Panel Function

1. Power

2. TV/AV

3. MENU Press to select the main menu

4. VOL- Volume down / Left button to adjust the item in the OSD

VOL+ Volume up / Right button to adjust the item in the OSD

/Press to enter

5. CH- TV channel down / to select the item in the menu

CH+ TV channel up / to select the item in the menu

6. Power indicator

7. Remote Sensor

Selects the input signals.

Receives the signals from the remote control

T1 series

R1 series

TV/AV MENU VOL- VOL+ CH- CH+ POWER

2 3 4 5 1

67

Connection Options

The above figure is for reference only, connections

may differ depending upon the models and terminals

of some models may be on the back bottom of the set

DVD

STOP

PLAY/PAUSE OPEN/CLOSE

PREV NEXT

DVD insert

Please see the real set

of the DVD position

Label towards back

Pr

Pb

Y

AUDIO

R

L

S-VIDEO

R AUDIO IN L

VIDEO IN

ANT IN

VGA IN PC AUDIO I N HDMI

ANT IN(Antenna Input)

Connect cable or

antenna signals to

the TV, either

directly or through

your cable box.

Headphone

Connect audio

output from an

external device

to these jacks

Audio in

Video in

Connect video

output from an

external device

to this jack

S-VIDEO

Connect S-Video

out from an S-Video

device to the jacks.

Component Input

Connect a component

video device to these

jacks

Connect audio

output from an

external device

to these jacks

Audio in

VGA

Connect to the VGA

15PIN analog output

connector of a PC

graphics card to use

set as a PC display

PC audio in

Connect the audio

output from the pc

to the PC audio

input port

HDMI

Connect to HDMI

output of other

equipment

Pr

Pb

Y

AUDIO

R

L

S-VIDEO

RAUDIOINL

VIDEO IN

ANT IN

VGAIN PCAUDIO IN HDMI

Remote Control

Installing Batteries

Remove the battery cover.

Insert two size AA batteries matching

the +/-polarities of the battery to the +/-

marks inside the battery compartment

(see image 1-for remote of TV with

DVD) ..

Precautions

Make sure that there is no

obstacle between the remote

controller and television set.

As strong light may interfere with the

signals, change your position to

operate the remote control if

the television cannot be turned

on or off as expected.

Keep the remote control

away from heat sources or

humid areas to ensure

effective performance of

the remote.

Make sure that two AA 1.5V or AAA

depending up the model alkaline

batteries are loaded. The batteries

must be of the same type, must be

inserted properly, and must not be

rechargeable.

Insert two size AAA batteries matching

the +/-polarities of the battery to the +/-

marks inside the battery compartment

(see image 2-for remote of TV without

DVD) .

Image 1

Image 2

Power

DVD Open/close

Input selection

TV Sleep button

TV/DVD

Mute

Return to previous channel in TV mode

Program Infromation

Program Number

Select MONO,STEREO, SAP in NTSC system

CC( closed caption) On / Off

Select additional channels

Adjust Picture Mode

Volume/Channel Selection

MENU

Confirm button

Adjust sound mode

DVD STOP

DVD SUBTITLE

DVD SETUP

DVD PAUSE/STEP

DVD FAST REVERSE

DVD FAST FORWARD

DVD MENU

DVD Next Chapter

DVD Previous Chapter

DVD REPEAT

DVD PLAY/ENTER

DVD A-B REPEAT

DVD Cursor Move button

DVD SLOW

DVD ANGLE

DVD SEARCH

DVD AUDIO Mode

DVD TITLE/PBC

DVD PROGRAM Zoom Function

DVD CALL DVD 10+

Exit On Screen Display

Select the aspect ratio

Shows program schedule in TV

Open the channel list in TV

Open the favourite channel list in TV

Remote Control Key Functions

When using the remote control, aim it

towards the remote sensor on the TV

Buttons on the remote control

UP

DOWN

LEFT

RIGHT

POWER TV/DVD

OPEN/CLOSE

SLEEP Q.VIEW

INFO

MUTE

1234

5678

90

CC

P. M ODE

CH+

CH-

VOL

-

VOL

+

MENU

OK S.MODE

STOP

SETUP

PAUSE/STEP

REV FWD PREV NEXT

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC SEARCH

ZOOM

D.CALL

PROGRAM

EXIT ARC GUIDE

SUBTITLE

SAP

TV/AV

AUDIO

CH.LIST FAV.LIST

10+

(For TV with DVD)

Remote Control Key Functions

When using the remote control, aim it

towards the remote sensor on the TV

Mute

Return to previous channel in TV mode

Input selection

Program Number

Select MONO, STEREO, SAP in NTSC system

Confirm button

Volume/Channel Selection

CC ( closed caption) On / Off

TV Sleep button

Shows program schedule in TV

Select the aspect ratio

Open the favorite channel list in TV

Open the channel list in TV

Adjust sound mode

MENU

Select additional channels

Adjust Picture Mode

Exit On Screen Display

Program Infromation

Power

Buttons on the remote control

MUTE

Q.VIEW INFO

INPUT EXIT

SAP P.MODE

CC

CH+

CH-

VOL

-

VOL

+

MENU

SLEEP S.MODE

GUIDE ARC CH.LIST

FAV.LIST

OK

(For TV without DVD)

Note: the instruction on this manual takes

remote of TV with DVD for example.

Connection Instructions

Ensure that you connect the grounding / earth wire to prevent possible

electric shock. If grounding methods are not possible, have a qualified

electrician install a separate circuit breaker. Do not try to ground the

unit by connecting it to telephone wires, lightening rods, or gas pipes.

Grounding

External Equipment Connections

Antenna Connection

- Antenna or Cable Service with a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

wall antenna

socket

VHF antenna

UHF antenna

outdoor

antenna

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Bronze Wire

Be careful not to bend the bronze

wire when connecting the antenna.

Bronze Wire

Turn clockwise to tighten.

RF coaxial wire (75 ohm)

To improve picture quality in a poor

signal area, purchase and install a

signal amplifier.

If the antenna needs to be split for two

Tvs, install a 2-Way Signal Splitter

in the connections.

If the antenna is not installed properly,

contact your dealer for assistance.

NOTE: Cables shown are not included with the TV

Connection Instructions

You can use your LCD-TV as a monitor for your personal computer using a VGA

cable (not supplied).

VGA Setup

Connection and use steps:

1.Read the user guide supplied with

your computer and ensure that it has

a VGA connector;

2.Make sure that the power of the LCD

-TV and the PC are off;

3.Connect a D type 15-pin PC interface

cable ( not supplied ) to the PC video

interface connector on the PC. Then

connect the other end to the PC video

interface connector on the back of the

LCD-TV.Tighten the screws on the PC

connectors once they are firmly

connected;

4.Turn on the power of the LCD-TV first ,

and then turn on the power of the PC;

5.Press the TV/AV button to set the video input mode of the LCD-TV to PC;

Once the input for PC is selected and if you see no image press function

F8 on you pc.

6.Check the image on your TV. There may be noise associated with the resolution,

vertical pattern, contrast or brightness in PC mode. If noise is present, change

the PC mode to another resolution, change the refresh rate to another rate or

adjust the brightness and contrast on the menu until the picture is clear. If the

refresh rate of the PC graphic card can not be changed, change the PC graphic

card or consult the manufacturer of the PC graphic card.

Component Setup

How to connect

Connect the DVD video outputs (Y, PB, PR)

to the Component(Y, Pb, Pr) IN jacks on

the TV and connect the DVD audio outputs

to the AUDIO IN jacks on the TV, as shown

in the figure.

NOTE: If your DVD player does not have

component video output,use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the button on the remote

control to select the proper input.

TV/AV

Resolution

Mode

VGA

SVGA

XGA

Resolution

640x480

800x600

1024x768

Line frequency(KHz)

31.5

37.9

48.4

Frame frequency(Hz)

60

Note: All above listed are subject to VESA criteria.

Connection Instructions

VCR Setup

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has

Composite or S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are off;

.Turn on the LCD-TV first ; and then turn on the

power of the AV device;

4.Press the TV/AV button to set

the video input mode of the

LCD-TV to S-Video mode or

Video mode.

Connection Option 1

Set VCR output switch to 3 or 4 and then

tune TV to the same channel number.

Connection Option 2

1. Connect the audio and video cables from

the VCR's output jacks to the TV input jacks,

as shown in the figure.

When connecting the TV to VCR, match

the jack colors (Video = yellow, Audio

Left = white,and Audio Right = red).

If you connect an S-VIDEO output from

VCR to the S-VIDEO input, the picture

quality is improved; compared to conne-

cting a regular VCR to the Video input.

2. Insert a video tape into the VCR and press

PLAY on the VCR. (Refer to the VCR owner s

manual.)

3

- To avoid picture noise (interference), leave an adequate distance between the

VCR and TV

.

VCR

1

2

HDMI

HDMI Input

How to connect

Connect the cables from the external equipment's

output jacks to the TV input jacks, as shown in the figure.

How to use

1. Select the input source by using TV/AV button

on the remote control or on the TV.

2.

Operate the corresponding external equipment.

Refer to external equipment operating guide.

Connection Instructions

Cable TV Setup

- After subscribing to a cable TV service from a local provider you can watch cable

TV programming. The TV cannot display TV programming unless a TV tuner

device or cable TV converter box is connected to the TV.

- For further information regarding cable TV service, contact your local cable TV

service provider(s).

Connection Option 1

1. Select 3 or 4 with channel switch on cable

box.

2. Tune the TV channel to the same selected

output channel on cable box.

3. Select channels at the cable box or with

the cable box remote control.

Connection Option 2

1. Connect the audio and video cables from

the Cable Box's output jacks to the TV

input jacks, as shown in the figure.When

connecting the TV to a Cable Box, match

the jack colors

(Video = yellow, Audio Left = white, and

Audio Right = red).

2. Select the input source by using the

button on the remote control.

3. Select your desired channel with the

remote control for cable box.

TV/AV

External Component Source Setup

How to connect

Connect the audio and video cables from

the external equipment's output jacks to the

TV input jacks, as shown in the figure.

When connecting the TV to external equip-

ment, match the jack colors (Video = yellow,

Audio Left = white, and Audio Right = red).

How to use

1. Select the input source by using the

button on the remote control.

2. Operate the corresponding external equi-

pment. Refer to external equipment ope-

rating guide.

TV/AV

Basic Operating Instructions

Switch On/Off the TV set

When the POWER button is pressed and the LCD-TV is turned on, the

indicator light on the front of the LCD-TV changes from red to green. When the

LCD-TV is turned off using the power button, the LCD-TV will go into standby

mode and the indicator light turns red(or turns dark).

Audio Control

1.Press the VOL+ button to increase the volume. A number will appear

on screen indicating the volume level.

2.Press the VOL- button to decrease the volume. A number will appear

On screen indicating the volume level.

Mute

1.Press the MUTE button to mute the sound temporarily. A mute icon

Appears on the screen.

2.Press the MUTE button or VOL+ again to restore the sound.

The mute icon disappears.

Change the picture source so you can watch your TV, VCR, DVD, Cable ,

or any other devices that are connected to your TV.

1. Press the TV/AV button to enter the Select Source menu and then use

TV/AV button to select the desired items TV, Video, S-Video, Component

DVD, PC, HDMI .

2. Press the OK button to confirm .

Choose the input source

NOTE: The color of the indicator light may differ based upon the model purchased.

INFO

Press INFO button to display current program information.

Basic Operating Instructions

Select the TV Channel You Want

You can use the number buttons and button on the remote control to directly

select TV channels and press OK to confirm.

And you can press the buttons(CH+/CH-) on the remote control or on the panel to

make a selection.

Picture Mode

Audio Mode

Press button on the remote control for menu display . For desired mode

as follows:

Mild Standard Vivid Custom

P.MODE

Sleep

Press SLEEP button to set the time : Off

This function allows you to turn off the television after a pre-selected

minutes

-5 Min-10 Min-15 Min-30 Min- 45 Min

-60 Min-90 Min-120 Min-180 Min-240Min

number of

GUIDE(only available in digital signal)

Press GUIDE button in digital channels to display Guide menu.(This menu is

just for you to see the information and can not be changed)

Press VOL+/VOL- to select information for you to look over.

Off Concert Living Room Hall Bathroom Cave Arena Church

Press S.MODE button on the remote control for menu display . For desired mode

as follows:

S

ARC button

Press to select the aspect ratio among Full Screen, Normal, Wide, Zoom and

Cinema. (Display mode may differ from different inputs)

Basic Operating Instructions

button

Press to select additional channels (digital and analog) being broadcast by the

same station. For example, to select digital channel “11.1”, press “11”, then

press “ ” and “1”.

CH.LIST button

Press to display the channel list. Press VOL+/VOL- to turn to the next or previous

page, press CH+/CH- to select the item and OK button to select the channel you

desired.

FAV.LIST button

Adding favorite channels

Press FAV.LIST under one channel. The favorite channel list opens.

Press CH+ or CH– to select a blank box, then press OK to confirm .

The channel will be added to the favorites channel list.

Press OK again, the channel will be removed from the f

Tuning to a favorite channel

Press FAV.LIST. The favorite channel list opens.

Press CH+ or CH– to select the channel and press OK to confirm .

Your LCD TV automatically tunes to the channel you selected.

avorites channel list.

Menu Operations

Video Menu Options

1. Press MENU button to display the main menu, and CH+/CH- to select the

main menu function.

2. Press VOL+/OK button to enter the sub menu and CH+/CH- to go up and down

to select the desired option .

3. Press VOL+/OK button to confirm and VOL+/VOL- to make changes to

the parameters

4. Press the EXIT button to return to the main menu.

5. Press the MENU button to exit the menu screen.

* In this manual, the OSD (On Screen Display) may be differ from your TV

These are examples to illustrate the TV's operation.

Press TV/AV to select the input source. The menu for each source may be

different .

Picture quality can be adjusted for any input separately .

The picture quality on the screen can be adjusted as follows:

1. Press MENU button and CH+/CH- until the following menu appears on the

screen.

2. Press VOL+/OK button to enter the menu function and CH+/CH- to scroll up

and down to select the desired function.

3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease

the level to adjust the selected option to your preference .

4. Repeat step 2 and step 3 until desired picture quality has been achieved .

Note:

1.The options may be different because of the inputs.

2.Symbols on top of the menu in this manual may differ from the actual set display.

3.The picture options can be changed only in Custom mode only, the other modes

are fixed.

Video

Audio

Channel

Lock

Function

Video

Mode Custom

Brightness

Contrast

Color

Tint

Sharpness

Color Temperature

Advanced Video

50

0

50

Select

BackAdjust

EXITOK

CH+/-

VOL+/-

Menu Operations

Function:

Mode: Select the type of picture which best corresponds to your viewing

requirements by selecting Picture Mode in Video menu. You may select the

picture mode directly by pressing the button on the remote control.

Brightness :Press CH+/CH- button and VOL+/OK to confirm, then press

VOL+/VOL- to adjust the brightness of the picture.

Contrast : Press CH+/CH- button and VOL+/OK to confirm, then press

VOL+/VOL- to adjust the contrast of the picture.

Color : Press CH+/CH- button and VOL+/OK to confirm, then press

VOL+/VOL- to adjust color saturation.

Tint : Adjust the tone of the picture .

Sharpness : Adjust the amount of the detail enhancement , the image

sharpness rises as the number increases (By increasing the level, it will show

cleaner and clearer images and by decreasing the level, it will make the picture

smoother).

Color Temperature: This will increase or decrease Warm (red) and Cool (blue)

colors to suit personal preferences.Select Cool to give the white colors a blue tint,

Standard to give the white colors a neutral tint, Warm to give the white colors

a red tint. Color temperature This will increase or decrease Warm (red) and

Cool (blue) colors to suit personal preferences.SelectCool to give the white

colors a blue tint, Standard to give the white colors a neutral tint, Warm to give

the white colors a red tint.

Contrast, Brightness, Sharpness , Color Temperature and Tint can only be adjusted when

Mode in Custom mode.

P.MODE

Advanced Video:To adjust the picture in advanced level:

DNR:

Black Level Extender:

White Peak Limiter:

CTI:

Flesh Tone:

Adaptive Luma Control:

Digital Noise Reduction. To adjust to reduce the appearance of digitizing

error caused by the compression:Medium,Strong,Off and Low.

To adjust the ability in the black areas detail of the

picture:On and Off.

To adjust the ability in the white areas detail of the

picture:On and Off.

Color Transient Intensity.To adjust the picture for color errors:Medium,Strong,

Off and Low

To adjust the flash colors:On and Off.

To adjust changes in the luminance of the picture:On and Off

Video Menu Options continued

Page is loading ...

Sens HL22T User manual

Other documents