Atomic SENSORED ESC Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Atomic SENSORED ESC Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTIONS ATOMIC
INSTRUCTIONS
1

INSTRUCTIONS ATOMIC
INSTRUCTIONS
2
ThankyouforpurchasingtheATOMICSENSOREDESC(electronicspeedcontroller).
Westronglyrecommendreadingthroughthisusermanualbeforeuse.Wedonotassumeresponsibilityfor
anylossescausedbyunauthorizedmodificationstoourproduct.Weareonlyresponsibleforourproduct
costandnothingelseasresultofusingourproduct.
Warnings:
Ensurealldevicesorwiresarewellconnected,inordertopreventpoorconnectionsthatmaycause
yourvehicletolosecontrolorotherunpredictableissueslikedamagetothedevice.
Alwaysdisconnectandremovebatteriesafteruse,astheESCwillcontinuetoconsumecurrentifit’s
stillconnectedtobatteries(evenifthesystemisturnedoff).Long‐timecontactwillcausebatteriesto
completelydischargeandresultindamagetobatteriesorESCorboth.
Features:
Ultraminisize,easytoputon1:28scaleRCcars
Compatiblewithbothsensoredorsensorlessbrushlessmotorsonthemarket.
Aluminumcasingwithexcellentheatdissipation.
Variousprotectionscontrol:motorlockedupprotection,low‐voltagecutoffprotection,thermal
protectionandfailsafe.
AdvancedprogrammingviaportableLCDprogrambox(soldseparately).

Specifications
CurrentRating 24AContinues,40APeak
BECOutput 6V–1.5A, 7.4V‐‐1A
BatteryInput 2celllipo(7.4V),4cellNiMh(4.8V)
Dimension: 20*14*7mm
MotorCompatibility BothSensoredorSensorlessmotors(15or16mmdiameter),12000Kvorbelow
Applications 1:28or1:24RCcars
INSTRUCTIONS ATOMIC
INSTRUCTIONS
3
Connectionsofcables:
1. Motorwire‐AtothemotorAsolder‐tabs
2. Motorwire‐BtothemotorBsolder‐tabs
3. Motorwire‐CtothemotorCsolder‐tabs
4. Connectthesensorcabletothemotor(ifyouusingsensoredmotor)
5. Connectbatterywire”+”tobattery“positive”wire
6. Connectbatterywire“‐“tobattery“negative”wire.
7. ConnecttheSignalcabletothereceiver.

Motorwire‐A
Motorwire–B
Motorwire–C
Batterywire+
Batterywire–
SignalCabletoReceiver/ProgramBox
Sensorcable
LEDsignal
PowerButton
INSTRUCTIONS ATOMIC
INSTRUCTIONS
4
SetupandCalibrationofThrottleRange.
SettingsinTransmitter(youmayneedtorefertoyourtransmittermanual):
1‐ Set“Throttle”HighPoint(orEPA,orATV)to100%.
2‐ Set“Brake”HighPoint(orEPA,orATV)to100%.
3‐ Set“ThrottleCurve”orThrottleExponential(EXPorEXPO)to0.
4‐ SetThrottleTrimtoCenter(Neutral).
5‐ SetThrottleSub‐trimtoCenter(Neutral).
6‐ SetThrottleChanneltoNormal”
***(forFutabatransmitter,Throttlechannelmayrequiretosetto“Reverse”)
CalibrationtheNeutral,ForwardandBackwardendpointtotheElectronicSpeedControl(ESC):
Forsafetyprecaution,removethemotorpinionbeforecalibration.Orputthecaronthecarstand,tomake
surethewheelsareelevatedfromsurface.
1‐ Switchontransmitterandthrottlestickatneutralposition.
2‐ ConnectthebatterytoESC
3‐ PressandholdtheESCpowerbutton,untilaBLUELedlightup.
4‐ WhentheBLUELedlightup,ESCisinThrottleCalibrationmodeandthe
neutralpositionissavedintheESC.
5‐ Movethethrottletothefullthrottleposition,thentheBLUELedwillbeflashinguntila
solidBLUELedwillbelightup.LightupBLUELedrepresentthefullthrottlepositionhas
beenset.
6‐ Movethethrottlesticktothefullbrakeposition,thentheREDLedwillbeflashinguntila
solidREDLedwillbelightup.LightupREDLedrepresentthefullbrakepositionhasbeen
set.
7‐ Movethethrottlestickbacktheneutralpositionagain,thentheflashingRED&
BLUE(purplecolor)Ledwillbelightupthatmeansthrottlerangesettinghasbeen
completed.
8‐ Reboot:PowerofftheESCandPoweronit. AfterreboottheESCnowisreadyforrun.

LEDSignals
ThrottleNeutral Blue
FullThrottle Blue+Red
FullBackward Red
/