- 2 -
BATTERY INSTALLATION
1. Remove the battery cover from the bottom of the device.
2.
Insert 3 AAA batt
eries noting the correct polarity (“+” or “-”).
3.
R
eplace the battery cover.
OPERATION
1. Open the top mirror.
2.
Adjust the brack
et to make the mirror stand. NOTE: The top mirror is the 10X mirror. The lower
mirror is the 1X (normal) view.
3.
T
o turn on the LED lights, slide the ON/OFF switch on the bottom of the unit to the ON position.
CARE & MAINTENANCE
• Clean mirrors with a clean, soft, slightly damp cloth only.
CAUTION
• Keep this device and all batteries out of the reach of children.
•
K
eep this device away from water.
•
Do not submerge in wat
er or any other liquid.
•
Alway
s start with a fresh set of batteries.
•
Do not mix batt
ery types.
• Do not use rechargeable batteries.
•
Do not mix old and new batt
eries.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our
Customer Service department at 1 (877) 210-3449. Customer Service agents are available
Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.