Gaggia MD75 M AUTOMATIC Owner's manual

MD75 M

MD64 M

MD58 M

STANDARD AUTOMATIC

NEW STANDARD NEW AUTOMATIC

COMPACT STANDARD COMPACT AUTOMATIC

D75

D64

D58

I

GB

F

D

E

MACINADOSATORE:

DOSER COFFEE-GRINDER:

MOULIN DOSEUR:

DOSIERMÜHLE:

MOLINO DOSIFICADOR:

Istruzioni d'uso

Operating Instructions

Mode d'emploi

Bedienungsanleitung

Instrucciones de uso

CE

DICHIARAZIONE DI CONFORMITA'

DECLARATION OF CONFORMITY

DECLARATION DE CONFORMITE

KONFORMITATSERKLARUNG

DECLARACIÓN DE CONFORMIDAD

Tipo di prodotto Macinadosatore

Product type Doser Coffee-Grinder

Type de produit Broyeur-doseur

Produktart Dosiermühle

Tipo de producto Molino-Dosificador

Modelli

Types MD75

Modèles MD64

Type MD58

Modelos

- Con la presente l'azienda dichiara sotto la propria responsabilità, che il prodotto soddisfa per

progettazione e costruzione i requisiti della Direttiva:

- We, the company, declare here with on our own responsability that the above-metioned product meets

the requirements of the Directive:

- Par la présente, la société déclare sous sa propre responsabilité que le produit est conforme quant à sa

conception et à sa construction aux dispositions de la directive :

- Hier mit bestatigt die Firma unter eigener Verantwortung, dab das o.a.produkt in bezug auf Entwurf und

Fertigung den Anforderungen der Richtlinie:

- Con la presente la empresa declara bajo su propia responsabilidad, que en cuanto a diseño y

construcción el producto cumple con los requisitos establecidos por las siguientes normas:

Direttiva Bassa Tensione

Low Voltage Directive 73/23/CEE

Directive Basse Tension 93/68/CEE

Niederspannungsrichtlinie

Norma para Baja Tensión

- La conformità è stata verificata con l'ausilio delle seguenti norme armonizzate:

- Conformity has been controlled with the aid of the following Harmonized Standards:

- La conformité a été vérifiée d'après les normes harmonisées suivantes :

- Die Konformitat wunder auf Grunde u.a. Harmonisierten Normen gepruft:

- La conformidad ha sido comprobada con la ayuda de las siguientes normas conformes:

EN 60335-1 EN 60335-2-14

Direttiva Compatibilità Elettromagnetica

Electromagnetic Compatibility Directive 89/336/CEE

Directive Compatibilité Electromagnétique 92/31/CEE

EMV Richtlinie 93/68/CEE

Normas sobre Compatibilidad Electromagnética

- La conformità è stata verificata con l'ausilio delle seguenti norme armonizzate:

- Conformity has been controlled with the aid of the following Harmonized Standards:

- La conformité a été vérifiée d'après les normes harmonisées suivantes :

- Die Konformitat wunder auf Grunde u.a. Harmonisierten Normen gepruft:

- La conformidad ha sido comprobada con la ayuda de las siguientes normas conformes:

EN 55014 EN61000-3-2 EN 61000-3-3

AMMINISTRATORE UNICO

Ing. Jean Paludetto

_____________________________

Page is loading ...

1 GENERAL INSTRUCTIONS

1-1 Before starting up the appliance, carefully read the following instructions.

1-2 This appliance has been designed for professional use only and hence must only be

used by trained personnel familiar with its operation.

1-3 Keep the appliance well clear of water jets, damp areas and heat sources.

1-4 Always consult a qualified electrician for repairs and maintenance.

2 DESCRIPTION OF APPLIANCE (Fig. 1)

A) Coffe tub lid G) Press

B) Coffee tub H) Switch

C) Coffee tub hatch I) Grinder plate

D) Dispenser lid L) Body of machine

E) Coffee dispenser F) Measuring lever

3 INSTRUCTIONS FOR FITTING THE BELL TO THE BODY OF THE DOSER

COFFEE-GRINDER OR COFFEE-GRINDER

3-1 The bell must be fitted before using the doser coffee-grinder or coffee-grinder.

3-2 Align the hole of the bell with one of the holes of the adjusting ring-nut (Fig. 2).

3-3 Ensure that the fan does not prevent you removing the dispenser cover or lowering

the stop pin of the adjusting disk - if it does, change holes.

3-4 Fasten, using the appropriate screw.

4 INSTALLATION

4-1 Installation must be carried out in strict compliance with the provisions of law

currently in force in the country of use, with particular reference to said country’s

accident and fire-prevention requirements and electricity authority regulations.

4-2 Before connecting the appliance to the mains supply, make sure that the voltage

indicated on the data plate is commensurate with that of the mains supply.

4-3 Carefully clean all the components (see point 7).

4-4 Make sure that the switch is off (position 0).

4-5 Insert the plug in the power inlet.

4-6 Tampering with the appliance or failure to comply with the relative connection

requirements causes undue danger and consequently renders the manufacturer’s

guarantee null and void.

5 FIRST START UP

5-1 Grind a few ounces of coffee to check the fineness of the grind.

5-2 If the grind is not to your liking, adjust the grinding system as follows:

Click adjustment (fig. 3)

- Press the fixing pin and turn the grinder in a clockwise direction for a courser grind

- Press the fixing pin and turn the grinder in an anti-clockwise direction for a finer grind

- The motor must be turned off when you do this.

Micrometric adjustment (fig.4)

- Turn the small right hand knob in an anti-clockwise direction for a courser grind

- Turn the small right hand knob in a clockwise direction for a finer grind

- The motor must be running when you do this

5-3 The numbers shown on the adjustment ring are purely indicative and could vary from

machine to machine, or when you replace the grindstone.

3

ENGLISH

6 OPERATION

6-1 Place the coffee beans in the tub, open the hatch and switch on, operating the

machine until the desired quantity of powder has been ground. Measure out the

ground coffee, pulling the lever.

6-2 Never fill the coffee dispenser more than 2/3rds.

6-3 The automatic doser coffee-grinder model starts and stops automatically. Always switch

off the appliance when not in use and at the end of the day.

6-4 Adjusting ground coffee fineness: Repeat step 5-2 when the fineness needs

adjusting – remember that fresh coffee and room humidity can have an effect on

the grind.

6-5 Regulating measures (Fig. 5): turn the pin inside the coffee dispenser in a

clockwise direction (to decrease measure) or in an anti-clockwise direction (to

increase measure)

7 CLEANING

7-1 ALWAYS REMOVE THE PLUG FROM THE POWER INLET BEFORE CLEANING

THE APPLIANCE.

7-2 Detach all removable parts from the appliance and hand wash in soapy water (never

clean in the dishwasher).

7-3 Clean the appliance body with a damp cloth (never immerse the appliance in water).

7-4 Make sure that encrustations do not form inside the coffee dispenser.

7-5 The appliance can be kept clean more easily if washed every day.

8 FURTHER INSTRUCTIONS

8-1 Packing disposal: following removal of the appliance from its packing, dispose of

said packing in compliance with the standards currently in force in the country of use.

8-2 Appliance disposal: When the appliance reaches the end of its service life, do not

discard in the environment, but rather dismantle and dispose of the appliance in

accordance with the regulations governing the various materials used for its

construction. We recommend that such operations be performed by a qualified

waste disposal company.

8-3 DO NOT DISCARD IN THE ENVIRONMENT.

9 WARRANTY

9-1 The machine is guaranteed for a period of 12 months from the date of purchase.

9-2 Defects resulting from normal wear or caused by improper use of the appliance are

not covered by the warranty.

9-3 Tampering with the appliance will automatically invalidate the warranty.

4

Page is loading ...

This product complies with EU

Directive 2002/96/EC.

The symbol on the product

or on its packaging indicates that

this product may not be treated as

household waste. Instead it shall be

handed over to the applicable

collection point for the recycling of

electrical and electronic equipment.

By ensuring this product is disposed

of correctly, you will help prevent

potential negative consequences for

the environment and human health,

which could otherwise be caused by

inappropriate waste handling of this

product. For more detailed

information about recycling of this

product, please contact your local

city office, your household waste

disposal service or the shop where

you purchased the product.

Dieses Produkt entspricht der EU-

Richtlinie 2002/96/EG.

Das Symbol auf dem

Produkt oder seiner Verpackung

weist darauf hin, dass das Produkt

nicht als normaler Haushaltsabfall zu

behandeln ist, sondern an einem

Sammelpunkt für das Recycling von

elektrischen und elektronischen

Geräten abgegeben werden muss.

Durch Ihren Beitrag zum korrekten

Entsorgen dieses Produkts schützen

Sie die Umwelt und die Gesundheit

Ihrer Mitmenschen.

Umwelt und Gesundheit werden

durch falsches Entsorgen gefährdet.

Weitere Informationen über das

Recycling dieses Produkts erhalten

Sie von Ihrer Gemeinde, der

Müllabfuhr oder dem Geschäft, in

dem Sie das Produkt gekauft haben.

Page is loading ...

20087 Robecco sul Naviglio – Milano – Italia

Telefoni: 0294993-1 (15 linee) 029471654 - Fax: 029470888

Sede legale: Via C.Gomes,16 - 20124 Milano

www.gaggia.it - E-mail: [email protected]

®

S.p.A.

30206 Visual Comunicazione (Ve)

MD75 CARATTERISTICHE TECNICHE - MD75 FEATURES

Diametro macine Grinding blades diam. 75 mm

Potenza Power 800 W

Motore Motor 1400 rpm

Produzione caffè Grinding capacity 12-14 Kg/h

Dispositivo contadosi Dose counter si / yes

Dimensioni Dimensions 250 x 360 h 630

Peso netto Net weight 15,5 Kg

Peso lordo Gross weight 17 Kg

MD64 CARATTERISTICHE TECNICHE - MD64 FEATURES

Diametro macine Grinding blades diam. 65 mm

Potenza Power 340 W

Motore Motor 1400 rpm

Produzione caffè Grinding capacity 8-10 Kg/h

Dispositivo contadosi Dose counter si / yes

Dimensioni Dimensions 220 x 370 h 600

Peso netto Net weight 13 Kg

Peso lordo Gross weight 14,2 Kg

MD58 CARATTERISTICHE TECNICHE - MD58 FEATURES

Diametro macine Grinding blades diam. 58 mm

Potenza Power 250 W

Motore Motor 1400 rpm

Produzione caffè Grinding capacity 3-4 Kg/h

Dispositivo contadosi Dose counter si / yes

Dimensioni Dimensions 190 x 210 h 470

Peso netto Net weight 9,0 Kg

Peso lordo Gross weight 10,2 Kg

LA DITTA GAGGIA SI RISERVA DI MODIFICARE SENZA PREAVVISO LE CARATTERISTICHE TECNICHE DEI PRODOTTI

THE GAGGIA COMPANY RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE

Gaggia MD75 M AUTOMATIC Owner's manual

Gaggia MD75 M AUTOMATIC Owner's manual

in other languages

Related papers

Other documents