Premier PSD-CAM Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide
Installation Instructions Visit the Premier Mounts website at http://www.mounts.com
¼” Flat Washers
(Qty 3)
PSD-CAM Large Video-Conference Camera Shelf Installation Instructions
9533-035-001-00
3130 East Miraloma Avenue, Anaheim, CA 92806 USA
USA and Canada
Phone: 1.800.368.9700 Fax: 1.800.832.4888
Parts List
PSD-CAM
M8 x 10mm Set Screw
(Qty 2)
¼”-20 x 3/8” Pan Combo
Phillips Screw (Qty 1)
PSD-CAM Shelf
(Qty 1)
Place each PSD-CAM shelf over the end of the support poles of the cart or stand (Figure 1).
®
Use one (1) M8 x 10mm set screw and attach it to the hole in the rear of each shelf collar (Figure 2).
¯
Use a 5/32” Allen wrench to tighten the set screws.
°
Fasten the video-conference camera through the shelf’s mounting slot using the ¼”-20 x 3/8” pan combo Phillips screw
and ¼” at washers as needed (Figure 3).
5/32” Allen Wrench
(Qty 1)
M8 x 10mm Set Screw
¼”-20 x 3/8” Pan Combo
Phillips Screw
¼” Flat Washers
(use as needed)
Generic video-conference camera is
shown for illustration purposes only.
Support poles not shown.
Figure 1
Figure 2
Figure 3
  • Page 1 1

Premier PSD-CAM Installation guide

Category
Wall & ceiling mounts accessories
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI