Danfoss MBS 3350 Installation guide

Type
Installation guide
Instruction and Maintenance Manual
Pressure Transmitter
MBS 3350
© Danfoss A/S (IA-MO), 2012-10 IC.PI.P21.X1.02 – 520B5422 1
Mounting
Code no.
Wärtsi
part no.
Danfoss
code no.
PAAZ000312 060G6017
Wire colour
Output signal
4-20 mA
Black Supply +
Blue Supply –
Brown Not connected (cut off)
Screen Connected to enclosure
Electrical connection
Maintenance
MBT 3350 pressure transmitter has no moving parts which
cause wear and tear and is categorized as
maintenance free.
However, check of connection, cables and transmitter at
installation can be done by measuring the current output
give stable 4 mA without pressure.
If no current is present, connection and cable should be
checked.
If current either is too high or low the pressure transmitter
should be checked by use of calibrator or in a laboratory.
  • Page 1 1

Danfoss MBS 3350 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI